kismet cos nie tak

["Paweł (Px2) Peters"]

Przy probie startu kismet wywala blad:

[root w enex root]# kismet
Server options:  none
Client options:  none
Starting server...
Will drop privs to px2 (500)
No enable sources specified, all sources will be enabled.
Source 0 (orinoco): Using pcap to capture packets from eth1
Source 0 (orinoco):  Attempting to enter monitor mode.
Waiting for server to finish starting before startuing UI...
Enabling monitor mode for an orinoco card on eth1 channel 6
Invalid command : monitor
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Source orinoco: Created child capture process 5571
Dropped privs to px2 (500)
Enabling channel hopping.
Disabling channel splitting.
Allowing clients to fetch WEP keys.
Logging networks to Kismet-Feb-10-2005-1.network
Logging networks in CSV format to Kismet-Feb-10-2005-1.csv
Logging networks in XML format to Kismet-Feb-10-2005-1.xml
Logging cryptographically weak packets to Kismet-Feb-10-2005-1.weak
Logging cisco product information to Kismet-Feb-10-2005-1.cisco
Logging gps coordinates to Kismet-Feb-10-2005-1.gps
Logging data to Kismet-Feb-10-2005-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Reading AP manufacturer data and defaults from /etc/ap_manuf
Reading client manufacturer data and defaults from /etc/client_manuf
FATAL: Dump file error: Unable to open dump file 
Kismet-Feb-10-2005-1.dump (Permission denied)
FATAL:  capture child 5571 packet buffer empty and flagged as diseased, 
exiting
Starting UI...
FATAL:  Could not connect to localhost:2501.
Client exited, terminating...
Done.  Run kismet_unmonitor or eject and re-insert your card (or restart 
your
 pcmcia services) to return your card to normal operation.
[1] + Done (1)             ${BIN}/kismet_server --silent $server
[root w enex root]#             

zaznaczona linijka jest ciekawa

a tutaj linie 82-86 kismet_monitor:

       "orinoco")
                echo "Enabling monitor mode for an orinoco card on 
$DEVICE channel $CHANNEL"
                iwpriv $DEVICE monitor 1 $CHANNEL
                ifconfig $DEVICE promisc up
                ;;

dodatkowo:
[root w enex root]# iwpriv eth1 monitor
Invalid command : monitor

i /var/log/kernel:

Feb 10 17:15:34 enex kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Feb 10 17:15:35 enex kernel: orinoco 0.13e (David Gibson 
<hermes w gibson.dropbear.id.au>, Pavel Roskin <proski w gnu.org>, et al)
Feb 10 17:15:35 enex kernel: orinoco_cs 0.13e (David Gibson 
<hermes w gibson.dropbear.id.au>, Pavel Roskin <proski w gnu.org>, et al)
Feb 10 17:15:35 enex kernel: eth1: Station identity 001f:0001:0008:0048
Feb 10 17:15:35 enex kernel: eth1: Looks like a Lucent/Agere firmware 
version 8.72
Feb 10 17:15:35 enex kernel: eth1: Ad-hoc demo mode supported
Feb 10 17:15:35 enex kernel: eth1: IEEE standard IBSS ad-hoc mode supported
Feb 10 17:15:35 enex kernel: eth1: WEP supported, 104-bit key
Feb 10 17:15:35 enex kernel: eth1: MAC address 00:E0:63:82:B8:4E
Feb 10 17:15:35 enex kernel: eth1: Station name "HERMES I"
Feb 10 17:15:35 enex kernel: eth1: ready
Feb 10 17:15:35 enex kernel: eth1: index 0x01: Vcc 5.0, irq 11, io 
0x0100-0x013f
Feb 10 17:15:57 enex kernel: kismet_server uses obsolete 
(PF_INET,SOCK_PACKET)
Feb 10 17:16:09 enex kernel: device eth1 entered promiscuous mode
Feb 10 17:16:19 enex kernel: eth1: no IPv6 routers present

nie uzywalem tego wczesniej wiec moze robie cos nie tak, prosze o 
wskazowki :)


Pozdrawiam
Px2