pcimodules i pcidev /net

[Andrzej Krzysztofowicz]

Mikolaj Kucharski wrote:
> Mam zaladowany modul e100 a karta ``EtherExpress PRO/100'' nie jest
> wykrywana. Po zaladowaniu modulu eepro100:
> 
> eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
> eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw w saw.sw.com.sg> and others
> eepro100: cannot reserve I/O ports
> eepro100: cannot reserve I/O ports
> 
> Karta nie dziala. Serwer stoi od marca tego roku, ale nie pisalem o tym
> bo myslalem wtedy ze tamto jajko 2.6 ma taki problem. Dzis zrobilem
> upgrade z 2.6.11.10-6smp na 2.6.14.2-4smp i jak widzicie powyzej, nadal
> to samo :/ Dodam, ze na jajku 2.4 jest ok (sprawdzane na podobnym
> serwerze z ta sama karta, choc nie moge tego zweryfikowac, pisze z
> pamieci).

Mysle, ze piszesz na niewlasciwa liste.
Powinienes to raczej zglosic ludziom od kernela (linux-kernel).
(Chyba, ze waniliowe 2.6 jednak dziala - wtedy problem jest PLD-specific)

> # lspci                                                                                                                                                  
> 00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 05)
> 00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 05)
> 00:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1510 (rev 02)
> 00:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1510 (rev 02)
> 00:02.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
> 00:03.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a)
> 00:04.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller
> 00:06.0 PCI bridge: Intel Corporation EtherExpress PRO/100 Intelligent Server (rev 03)
> 00:06.1 Ethernet controller: Intel Corporation EtherExpress PRO/100 Intelligent Server (rev 03)
> 00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 4f)
> 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller
> 03:04.0 Network controller: Compaq Computer Corporation Fibre Channel Host Controller (rev 03)
> 03:06.0 RAID bus controller: Compaq Computer Corporation Smart Array 5300 Controller (rev 02)
> 
> # lspci -n
> 00:00.0 0600: 1166:0009 (rev 05)
> 00:00.1 0600: 1166:0009 (rev 05)
> 00:01.0 0100: 1000:000a (rev 02)
> 00:01.1 0100: 1000:000a (rev 02)
> 00:02.0 0200: 8086:1229 (rev 08)
> 00:03.0 0300: 1002:4756 (rev 7a)
> 00:04.0 0880: 0e11:a0f0
> 00:06.0 0604: 8086:5200 (rev 03)
> 00:06.1 0200: 8086:5201 (rev 03)
> 00:0f.0 0601: 1166:0200 (rev 4f)
> 00:0f.1 0101: 1166:0211
> 03:04.0 0280: 0e11:a0ec (rev 03)
> 03:06.0 0104: 0e11:b060 (rev 02)

-- 
=======================================================================
  Andrzej M. Krzysztofowicz               ankry w mif.pg.gda.pl
  phone (48)(58) 347 14 61
Faculty of Applied Phys. & Math.,   Gdansk University of Technology