CVS/SVN

[havner]

On Tue, Aug 08, 2006 at 08:26:12AM +0200, Marcin Król wrote:
> Bylbym dzwieczny, bo chce LINUX_2_6 puscic do ready ASAP.

fajne to jajko, na jednym uruchomieniu:
(pci=noacpi psuje?, zwalone fallbacki? nie znam sie na tym :-/)

---------------------------
setup_irq: irq handler mismatch
 <c01576eb> setup_irq+0x10b/0x130  <c0266820> serial8250_interrupt+0x0/0xe0
 <c0157885> request_irq+0x85/0xa0  <c0266a2b> serial_link_irq_chain+0xab/0xc0
 <c0266820> serial8250_interrupt+0x0/0xe0  <c0266edf> serial8250_startup+0x25f/0x480
 <c0262344> uart_startup+0x84/0x130  <c0263f31> uart_open+0xa1/0x120
 <c024dd6d> tty_open+0x22d/0x2d0  <c024db40> tty_open+0x0/0x2d0
 <c0184dbe> chrdev_open+0xae/0x150  <c0184d10> chrdev_open+0x0/0x150
 <c017a06c> __dentry_open+0xac/0x1e0  <c017a2f8> nameidata_to_filp+0x38/0x50
 <c017a1fc> do_filp_open+0x5c/0x60  <c017a3ea> get_unused_fd+0x6a/0xd0
 <c017a557> do_sys_open+0x57/0xe0  <c017a607> sys_open+0x27/0x30
 <c0102fb7> syscall_call+0x7/0xb
----------------------------
setup_irq: irq handler mismatch
 <c01576eb> setup_irq+0x10b/0x130  <cec2c0d0> snd_mpu401_uart_interrupt+0x0/0x20 [snd_mpu401_uart]
 <c0157885> request_irq+0x85/0xa0  <cec2ca8a> snd_mpu401_uart_new+0x21a/0x2c0 [snd_mpu401_uart]
 <cec2c0d0> snd_mpu401_uart_interrupt+0x0/0x20 [snd_mpu401_uart]  <c01fb548> sprintf+0x28/0x30
 <cec727d0> snd_cs423x_probe+0x200/0x2d0 [snd_cs4232]  <cec02052> snd_cs423x_nonpnp_probe+0x52/0xa0 [snd_cs4232]
 <c026d8b6> platform_drv_probe+0x16/0x20  <c026b6c5> driver_probe_device+0x75/0xe0
 <c026b730> __device_attach+0x0/0x10  <c026ab59> bus_for_each_drv+0x69/0x80
 <c026b7b1> device_attach+0x71/0x80  <c026b730> __device_attach+0x0/0x10
 <c026acc5> bus_add_device+0x35/0xc0  <c026f348> device_pm_add+0x58/0xa0
 <c0269a34> device_add+0x124/0x1a0  <c026d692> platform_device_add+0xc2/0x170
 <c026d878> platform_device_register_simple+0x58/0x80  <cec0215d> alsa_card_cs423x_init+0xbd/0xf1 [snd_cs4232]
 <c0140f02> sys_init_module+0xf2/0x180  <c0102fb7> syscall_call+0x7/0xb
-----------------------------
setup_irq: irq handler mismatch
 <c01576eb> setup_irq+0x10b/0x130  <c0266820> serial8250_interrupt+0x0/0xe0
 <c0157885> request_irq+0x85/0xa0  <c0266a2b> serial_link_irq_chain+0xab/0xc0
 <c0266820> serial8250_interrupt+0x0/0xe0  <c0266edf> serial8250_startup+0x25f/0x480
 <c0262344> uart_startup+0x84/0x130  <c0263f31> uart_open+0xa1/0x120
 <c024dd6d> tty_open+0x22d/0x2d0  <c024db40> tty_open+0x0/0x2d0
 <c0184dbe> chrdev_open+0xae/0x150  <c018b943> open_namei+0xc3/0x730
 <c0184d10> chrdev_open+0x0/0x150  <c017a06c> __dentry_open+0xac/0x1e0
 <c017a2f8> nameidata_to_filp+0x38/0x50  <c017a1fc> do_filp_open+0x5c/0x60
 <c017a3ea> get_unused_fd+0x6a/0xd0  <c017a557> do_sys_open+0x57/0xe0
 <c017a607> sys_open+0x27/0x30  <c0102fb7> syscall_call+0x7/0xb


-- 
Regards    Havner                      {jid,mail}:havner(at)pld-linux.org
PLD developer                                    http://www.pld-linux.org
PLD LiveCD author                             http://livecd.pld-linux.org
                   "Quis custodiet ipsos custodes?"