problemy z nut-2.6.1

[Paweł Sikora]

[root w vmx ~]# rpm -q udev nut
udev-172-1.x86_64
nut-2.6.1-2.x86_64

[root w vmx ~]# /etc/rc.d/init.d/ups start
Starting UPS drivers..............................................................................................................................................................................[ FAIL ]
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
libusb requires write access to USB device nodes.
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.1)
Network UPS Tools - UPS driver controller 2.6.1
libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/004/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/005/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/006/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/006/002: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/006/003: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/007/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/007/002: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/008/001: Permission denied.
libusb requires write access to USB device nodes.
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these options
(man 8 blazer).

Driver failed to start (exit status=1)
Starting UPS network daemon service...............................................................................................................................................................[ DONE ]


cofniecie do nut-2.6.0 naprawia sytuacje.