PLD-doc/book/en_book__config/en_config__x_xserver.sec
paszczus
cvs w pld-linux.org
Sob, 13 Sie 2005, 22:24:35 CEST
Author: paszczus
Date: Sat Aug 13 22:24:27 2005
New Revision: 6303
Modified:
PLD-doc/book/en_book__config/en_config__x_xserver.sec
Log:
- s/XFree86/X11/g
Modified: PLD-doc/book/en_book__config/en_config__x_xserver.sec
==============================================================================
--- PLD-doc/book/en_book__config/en_config__x_xserver.sec (original)
+++ PLD-doc/book/en_book__config/en_config__x_xserver.sec Sat Aug 13 22:24:27 2005
@@ -28,63 +28,63 @@
</thead>
<tbody>
<row>
- <entry>XFree86-driver-apm</entry>
+ <entry>X11-driver-apm</entry>
<entry>Alliance Promotion video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-ark</entry>
+ <entry>X11-driver-ark</entry>
<entry>Ark Logic video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-ati</entry>
+ <entry>X11-driver-ati</entry>
<entry>ATI video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-chips</entry>
+ <entry>X11-driver-chips</entry>
<entry>Chips and Technologies video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-cirrus</entry>
+ <entry>X11-driver-cirrus</entry>
<entry>Cirrus Logic video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-cyrix</entry>
+ <entry>X11-driver-cyrix</entry>
<entry>Cyrix MediaGX video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-firegl</entry>
+ <entry>X11-driver-firegl</entry>
<entry>Video drivers for ATI Radeon 8500, 9700, Mobility M9 cards and FireGL 8700/8800, E1, Z1/X1 accelerators</entry>
</row>
<row>
- <entry>XFree86-driver-glide</entry>
+ <entry>X11-driver-glide</entry>
<entry>3Dfx Voodoo1 and Voodoo2 cards</entry>
</row>
<row>
- <entry>XFree86-driver-glint</entry>
+ <entry>X11-driver-glint</entry>
<entry>GLINT and Permedia cards video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-i128</entry>
+ <entry>X11-driver-i128</entry>
<entry>Number 9 I128 video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-i740</entry>
+ <entry>X11-driver-i740</entry>
<entry>Video drivers for Intel i740</entry>
</row>
<row>
- <entry>XFree86-driver-i810</entry>
+ <entry>X11-driver-i810</entry>
<entry>Video drivers for cards based on Intel i810/i815/i830</entry>
</row>
<row>
- <entry>XFree86-driver-mga</entry>
+ <entry>X11-driver-mga</entry>
<entry>Matrox video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-neomagic</entry>
+ <entry>X11-driver-neomagic</entry>
<entry>NeoMagic video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-nsc</entry>
+ <entry>X11-driver-nsc</entry>
<entry>
National Semiconductors GEODE cards drivers. Supports
Obsługuje GXLV (with 5530 co-chipset), SC1200, SC1400 and GX2
@@ -92,51 +92,51 @@
</entry>
</row>
<row>
- <entry>XFree86-driver-nv</entry>
+ <entry>X11-driver-nv</entry>
<entry>Old nVidia card drivers: Riva128, RivaTNT, GeForce (no 3D acceleration)</entry>
</row>
<row>
- <entry>XFree86-driver-nvidia</entry>
+ <entry>X11-driver-nvidia</entry>
<entry>
New nVidia card drivers: TNT/TNT2/GeForce/Quadro for the
- XFree86 4.0 X-server; nVidia NV1 and Riva 128/128ZX are handled by the
+ X11 4.0 X-server; nVidia NV1 and Riva 128/128ZX are handled by the
<emphasis>nv</emphasis> package, they are NOT supported here
</entry>
</row>
<row>
- <entry>XFree86-driver-r128</entry>
+ <entry>X11-driver-r128</entry>
<entry>ATI Rage 128 video driver</entry>
</row>
<row>
- <entry>XFree86-driver-radeon</entry>
+ <entry>X11-driver-radeon</entry>
<entry>ATI Radeon video driver</entry>
</row>
<row>
- <entry>XFree86-driver-rendition</entry>
+ <entry>X11-driver-rendition</entry>
<entry>Rendition/Micron Verite video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-s3</entry>
+ <entry>X11-driver-s3</entry>
<entry>S3 Trio video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-s3virge</entry>
+ <entry>X11-driver-s3virge</entry>
<entry>S3 ViRGE and Trio3D video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-savage</entry>
+ <entry>X11-driver-savage</entry>
<entry>S3 Savage video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-siliconmotion</entry>
+ <entry>X11-driver-siliconmotion</entry>
<entry>Silicon Motion Lynx - based cards driver</entry>
</row>
<row>
- <entry>XFree86-driver-sis</entry>
+ <entry>X11-driver-sis</entry>
<entry>SiS video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-tdfx</entry>
+ <entry>X11-driver-tdfx</entry>
<entry>
3Dfx Voodoo Banshee, Voodoo3,
Voodoo4, Voodoo5. The DRI driver
@@ -145,19 +145,19 @@
</entry>
</row>
<row>
- <entry>XFree86-driver-tga</entry>
+ <entry>X11-driver-tga</entry>
<entry>TGA video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-trident</entry>
+ <entry>X11-driver-trident</entry>
<entry>Trident video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-tseng</entry>
+ <entry>X11-driver-tseng</entry>
<entry>Tseng Labs video drivers</entry>
</row>
<row>
- <entry>XFree86-driver-via</entry>
+ <entry>X11-driver-via</entry>
<entry>VIA CLE266 video drivers</entry>
</row>
</tbody>
@@ -195,9 +195,9 @@
<screen># poldek</screen>
<para>
You can start the installation by installing the base X package
- called <productname>XFree86</productname>:
+ called <productname>X11</productname>:
</para>
- <screen>poldek> install XFree86</screen>
+ <screen>poldek> install X11</screen>
<para>
<productname>poldek</productname> will find all the required
packages for you. It might ask you to make some choices when there
@@ -216,7 +216,7 @@
is the video driver for your video card selected from the table above. For example,
if you are using a modern nVidia card you could type:
</para>
- <screen>poldek> install XFree86-driver-nvidia</screen>
+ <screen>poldek> install X11-driver-nvidia</screen>
<para>
Once again all the required packages will be marked and the installation process
will start. Wait for it to finish and move on.
@@ -225,7 +225,7 @@
Now you will need some fonts. Start from the packages for your code page and
the basic fonts package. For example, if you are using ISO8859-1, install:
</para>
- <screen>poldek> install XFree86-fonts-*ISO8859-1-* XFree86-fonts</screen>
+ <screen>poldek> install X11-fonts-*ISO8859-1-* X11-fonts</screen>
<para>
As you can see, <productname>poldek</productname> allows you to use wildcards.
This is a good moment to tell you taht PLD comes with a wide set of available
@@ -233,7 +233,7 @@
such as Ethiopic, KO18-R (Cyryllic), Syriac. Now you have the fonts but the
installation process is not over yet. You will also need some tools to
configure your X server. You can find them in the
- <productname>XFree86-setup</productname> package. Installation procedure is
+ <productname>X11-setup</productname> package. Installation procedure is
the same as above.
</para>
<para>
@@ -322,7 +322,7 @@
<para>
Remember? "Every thing is a file." You have to specify the full path to your
mouse device. If you leave this field empty and press <emphasis>enter</emphasis>
- instead, <productname>XFree86</productname> will assume your mouse is connected
+ instead, <productname>X11</productname> will assume your mouse is connected
to <filename>/dev/mouse</filename>. Most of the time this is the right choice.
If you use a laptop, you can select <filename>/dev/psaux</filename> instead.
In more exotic cases, type the full path to the device.
Więcej informacji o liście dyskusyjnej pld-doc