Zapis konfiguracji sieci.

Artur Frysiak wiget w t17.ds.pwr.wroc.pl
Pon, 26 Lip 1999, 22:26:48 CEST


[poniedziałek, 26 lipiec 1999], Piotr Grochowski napisał(a):

> On Mon, 26 Jul 1999, Artur Frysiak wrote:
> 
> > Jeśli chodzi o stable i rc-scripts to pliki konfiguracyjne sieci są w
> > /etc/sysconfig/interfaces i wyglądają tak jak w RH.
> Jeszcze jedno mi się przypomniało: a co z /etc/sysconfig/network? W PLD
> nie ma?

Jest. Wygląda mniej więcej tak:
------------------------------------------------------------

######################################################################
# MAIN PART

# Do you need networking ?
NETWORKING=yes

# Do you need IPv6 networking, too ?
IPV6_NETWORKING=yes

# Set hostname here (only hostname)
HOSTNAME=wiget.t17.ds.pwr.wroc.pl

# Set domainname here
DOMAIN=t17.ds.pwr.wroc.pl
NISDOMAIN=

GATEWAY=156.17.210.254
GATEWAYDEV=eth0

# Do you want to use IPX networking ?
IPX=no
IPXAUTOPRIMARY=
IPXAUTOFRAME=
IPXINTERNALNETNUM=
IPXINTERNALNODENUM=

######################################################################
# IPv4 goodies

# Do you want enable IPv4 forwarding ?
IPV4_FORWARDING=yes

# Do you want to enable IPv4 anti spoofing ?
IPV4_ANTI_SPOOFING=

# Kernel should accept ICMP redirect messages ?
# The default is 'yes', if the kernel is configured for
# a regular host; and 'no' for a router configuration.
IPV4_ACCEPT_ICMP_REDIR=

# Kernel should accept source routed packets ?
# The default Is 'yes' for routers and 'no' for hosts.
IPV4_ACCEPT_SOURCE_ROUTE=

# Log packets with source addresses with no known route to kernel log ?
IPV4_LOG_MARTIANS=

# Do multicast routing ? The kernel needs to be compiled with
# CONFIG_MROUTE and a multicast routing daemon is required.
IPV4_MULTICAST=

# Do proxy ARP ?
IPV4_PROXY_ARP=

# Accept ICMP redirect messages only for gateways, listed in
# default gateway list ?
IPV4_ACCEPT_ICMP_REDIR_GATE=

# Send ICMP redirects to other hosts ?
IPV4_SEND_ICMP_REDIR=

# Ignore all ICMP echo requests ? 
IPV4_IGN_ALL_ICMP=

# Ignore ICMP echo requests to broadcast and multicast addresses ?
IPV4_IGN_CAST_ICMP=

# Enable MTU discovery patch ? (KERNEL MUST SUPPORT THIS)
# MTU (maximal transfer unit) is the size of the chunks we send out
# over the net. "Path MTU Discovery" means that, instead of always
# sending very small chunks, we start out sending big ones and if we
# then discover that some host along the way likes its chunks smaller,
# we adjust to a smaller size.
IPV4_MTU_DISCOVERY=

# Enable debugging of IP masquerading ?
IPV4_MASQ_DEBUGGING=

# Bug-to-bug compatibility with some broken printers. On retransmit
# try to send bigger packets to work around bugs in certain TCP
# stacks. Can be turned off by setting it to zero. 
IPV4_RETRANS_COLLAPSE=
	 
# Disable select acknowledgments after RFC2018 ?
# TCP may experience poor performance when multiple packets are lost
# from one window of data. With the limited information available
# from cumulative acknowledgments, a TCP sender can only learn about a
# single lost packet per round trip time. An aggressive sender could
# choose to retransmit packets early, but such retransmitted segments
# may have already been successfully received.
IPV4_NO_SELECT_ACK=

# Disable timestamps as defined in RFC1323 ?
# Timestamps are designed to provide compatible interworking with
# TCP's that do not implement the TCP Extensions for High Performance
IPV4_NO_TIMESTAMPS=

# Enable the strict RFC793 interpretation of the TCP urgent pointer field.
IPV4_RFC793=

# Enable SYN flood protection ?
IPV4_SYN_COOKIES=

# Disable window scaling as defined in RFC1323 ?
# The window scale extension expands the definition of the TCP
# window to 32 bits and then uses a scale factor to carry this
# 32-bit value in the 16-bit Window field of the TCP header.
IPV4_NO_WINDOW_SCALING=

# Enable dynamic socket address rewriting on interface address change.
# This is useful for dialup interface with changing IP addresses.
# (default no)
# IPV4_DYNAMIC_IP_PATCH_VALUE - value from 1 to 9
IPV4_DYNAMIC_IP_PATCH=
IPV4_DYNAMIC_IP_PATCH_VALUE=

# Range of ports used by TCP and UDP to choose the local
# port. Contains two numbers, the first number is the lowest port,
# the second number the highest local port. Default is "1024 4999".
# Should be changed to "32768 61000" for high-usage systems.
IPV4_LOCAL_PORT_RANGE="1024 4999"

######################################################################
# IPv6 goodies

# Do you want enable IPv6 forwarding ?
IPV6_FORWARDING=yes

# Enable tunnel interfaces configuration ?
IPV6_TUNNELCONFIG=yes

-------------------------------------------------------------------

Wiget
-- 
  __    __ _            _
 / / /\ \ (_) __ _  ___| |_  @__mail:  Artur Frysiak
 \ \/  \/ / |/ _` |/ _ \ __|            Rudlice 10
  \  /\  /| | (_| |  __/ |_           98-311 Ostrowek
   \/  \/ |_|\__, |\___|\__|
             |___/           email:   Wiget w t17.ds.pwr.wroc.pl
PGP key: http://www.t17.ds.pwr.wroc.pl/~wiget/pgp.key
Fingerprint16 = 70 DB E0 2D 12 AB C7 31  B6 58 B5 61 B3 98 B6 E6



Więcej informacji o liście dyskusyjnej pld-installer