2 problemy

[Krzysiek Taraszka]

On 30 Apr 2002, Zupa aka Tyler wrote:

> W liście z wto, 30-04-2002, godz. 19:34, Krzysiek Taraszka pisze: 
> 
> > ok, to teraz podaj wynik cat /etc/sysconfig/interfaces/ifcfg-eth0 i 
> 
> [root w moje /root]# cat /etc/sysconfig/interfaces/ifcfg-eth0
> # example config for first ethernet card
> 
> # name of the device
> DEVICE="eth0"
> 
> # IP addresses/address prefix
> # where prefix:
> # 24 - resembles netmask 255.255.255.0
> # 16 - resembles netmask 255.255.0.0
> # etc.
> # IPADDR may be either IPv4 or IPv6
> # you may have up to 256 addresses set up
> IPADDR=""
	^^^^^^
czemu to jest puste ?

> #IPADDR1=192.168.0.2/24
> #IPADDR2=192.168.0.3/24
> #IPADDR3=192.168.0.4/24
> 
> # you may select which of the above addresses
> # is primary for this interface (it'd be IPADDR1 in the example below)
> #IP4_PRIM_IF="1"
> 
> # activate on boot? yes|no
> # you must set it to 'yes' if you want to have this up after bootup
> ONBOOT="yes"
> 
> # dhcp|pump|none
> BOOTPROTO="none"
> # Added by installer
> PREFIX=""
	^^^^
to tez ?
 
> 
> > /etc/sysconfig/network.
> 
> [root w moje /root]# cat /etc/sysconfig/network

Ten masz raczej ok.

Krzysiek "dzimi" Taraszka			(dzimi w pld.org.pl)