dma dla ide w 2.2.21

[Tomasz Buziak]

mam htp370,
na 2.2.20 bylo ok,
po upgradzie na 2.2.21, jest cos takiego:

HPT370: IDE controller on PCI bus 00 dev 98
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT370: using 33MHz PCI clock
    ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:DMA, hdf:DMA
    ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:pio, hdh:pio
hdb: SAMSUNG CD-ROM SC-148F, ATAPI CD/DVD-ROM drive
hde: ST340016A, ATA DISK drive
hdf: ST340823A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xd800-0xd807,0xdc02 on irq 11
hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
hdf: 78165360 sectors (40021 MB) w/512KiB Cache, CHS=77545/16/63, UDMA(100)
 hde:hde: 0 bytes in FIFO
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hde: timeout waiting for DMA
hde: 0 bytes in FIFO
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hde: irq timeout: status=0x80 { Busy }
hde: DMA disabled
hdf: DMA disabled

nie moge za cholere ustawic udma dla dyskow ?????????????