cdrecord

[ja]

Witam!

Zrobiłem kilka dni temu upgrade całej distro (poldek
--upgrade-dist), czego wcześniej nie robiłem wcale (upgrade'owałem
tylko pojednyczne pakiety, i to raczej nie 'systemowe'). Wcześniej
korzystałem głównie pakietów z builda ISO z kwietnia. Nastąpiło po tym
kilka zmian, jak dla mnie większość na gorsze, ale o pozostałych może
w innym mailu.

Chodzi o nagrywanie (mam cdrom i nagrywarkę, obie TEACa). Przed
upgradem nie było problemu (robiłem z roota insmod/modprobe ide-scsi i
mogłem spokojnie nagrywać). Teraz niestety jest - ładuję ide-scsi
(przez wpis w /etc/modules.conf też próbowałem, efekt ten sam) i
następnie próbuję:

# cdrecord -scanbus
Cdrecord 1.11a38 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
Linux sg driver version: 2.1.41
Using libscg version 'schily-0.7'
scsibus0:
cdrecord: Resource temporarily unavailable. Cannot send SCSI cmd via
ioctl

W tym samym momencie mam w logach mniej więcej:

Oct 28 00:20:45 pldmachine kernel: paride: version 1.04 installed
Oct 28 00:20:45 pldmachine kernel: pg: pg version 1.02, major 97
Oct 28 00:20:45 pldmachine modprobe: modprobe: Can't locate module
paride_protocol
Oct 28 00:20:45 pldmachine kernel: pg0: Autoprobe failed
Oct 28 00:20:45 pldmachine kernel: pg: No ATAPI device detected
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
init_module: Device or resource busy
Oct 28 00:20:45 pldmachine insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
insmod char-major-97 failed
Oct 28 00:20:45 pldmachine kernel: paride: version 1.04 installed
Oct 28 00:20:45 pldmachine kernel: pg: pg version 1.02, major 97
Oct 28 00:20:45 pldmachine modprobe: modprobe: Can't locate module
paride_protocol
Oct 28 00:20:45 pldmachine kernel: pg0: Autoprobe failed
Oct 28 00:20:45 pldmachine kernel: pg: No ATAPI device detected
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
init_module: Device or resource busy
Oct 28 00:20:45 pldmachine insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
insmod char-major-97 failed
Oct 28 00:20:45 pldmachine kernel: paride: version 1.04 installed
Oct 28 00:20:45 pldmachine kernel: pg: pg version 1.02, major 97
Oct 28 00:20:45 pldmachine modprobe: modprobe: Can't locate module
paride_protocol
Oct 28 00:20:45 pldmachine kernel: pg0: Autoprobe failed
Oct 28 00:20:45 pldmachine kernel: pg: No ATAPI device detected
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
init_module: Device or resource busy
Oct 28 00:20:45 pldmachine insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
insmod char-major-97 failed
Oct 28 00:20:45 pldmachine kernel: paride: version 1.04 installed
Oct 28 00:20:45 pldmachine kernel: pg: pg version 1.02, major 97
Oct 28 00:20:45 pldmachine modprobe: modprobe: Can't locate module
paride_protocol
Oct 28 00:20:45 pldmachine kernel: pg0: Autoprobe failed
Oct 28 00:20:45 pldmachine kernel: pg: No ATAPI device detected
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
init_module: Device or resource busy
Oct 28 00:20:45 pldmachine insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Oct 28 00:20:45 pldmachine insmod: /lib/modules/2.2.22-3/misc/pg.o.gz:
insmod char-major-97 failed


Zdenerwowałem się trochę, bo mam kilka rzeczy do nagrania, A NIE MOGĘ
NIC NAGRAĆ! Co na to poradzić?

Aha, jeszcze kilka rzeczy:
# lsmod
Module                  Size  Used by
sg                     16096   0  (autoclean)
ipv6                   99296  -1  (autoclean)
emu10k1                40352   1
soundcore               2628   4  (autoclean) [emu10k1]
NVdriver             1064736  10  (autoclean)
ide-scsi                7744   0
scsi_mod               59720   2  (autoclean) [sg ide-scsi]
isofs                  17248   0  (autoclean) (unused)
nls_iso8859-1           2432   2  (autoclean)
nls_cp437               3936   2  (autoclean)
vfat                    9600   2  (autoclean)
fat                    30432   2  (autoclean) [vfat]
3c59x                  21640   2
usb-uhci               19212   0  (unused)
usbcore                50600   1  (autoclean) [usb-uhci]
ext2                   42664   1  (autoclean)
ide-disk                9472   4  (autoclean)
ide-mod               151520   4  (autoclean) [ide-scsi ide-disk]

# grep ^source /etc/poldek.conf
source = ra  ftp://ftp.pld.org.pl/dists/ra/PLD/i686/PLD/RPMS/
source = ra-supported  ftp://ftp.pld.org.pl/dists/ra/supported/i686/


ja, zdenerwowany :/