Problem z olicom GoCard
Bonder
bondpld w inf.sgsp.edu.pl
Pon, 28 Paź 2002, 09:13:27 CET
On Mon, 28 Oct 2002 08:48:33 +0100 (CET)
Tomasz Kłoczko <kloczek w rudy.mif.pg.gda.pl> wrote:
> On Mon, 28 Oct 2002, Bonder wrote:
> [..]
> > Próbowałem jeszcze z fmjv18x_cs ale efekt podobny
>
> No to po załądowaniu modułów na następnym terminalu zobacz co wpada w
> dmesg na temat inicjacji modułów i czy wszystko jest OK.
>
> kloczek
#dmesg
Linux version 2.2.22 (builder w ep09) (gcc version 2.95.4 20010319 (prerelease)) #1 Tue Oct 8 22:14:20 UTC 2002
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 02f20000 @ 00100000 (usable)
Detected 132685 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 263.78 BogoMIPS
Memory: 46584k/49280k available (756k kernel code, 412k reserved, 768k data, 52k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel old style machine check architecture supported.
Intel old style machine check reporting enabled on CPU#0.
CPU: Intel Pentium MMX stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfdcf1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 5.05 (2000-09-14) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 4096K size
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 101.346 MB/sec
p5_mmx : 120.015 MB/sec
8regs : 71.628 MB/sec
32regs : 56.388 MB/sec
using fastest function: p5_mmx (120.015 MB/sec)
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 52k freed
inserting floppy driver for 2.2.22
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
VFS: Disk change detected on device fd(2,0)
VFS: Can't find an ext2 filesystem on dev fd(2,0).
VFS: Can't find a romfs filesystem on dev 02:00.
VFS: Disk change detected on device fd(2,0)
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
Linux PCMCIA Card Services 3.1.30
kernel build: 2.2.22 #1 Tue Oct 8 22:14:20 UTC 2002
options: [pci] [cardbus] [pnp]
PCI routing table version 1.0 at 0xf97e0
PnP: PNP BIOS installation structure at 0xc00f8e30
PnP: PNP BIOS version 1.0, entry at f0000:9c9f, dseg at 0
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
Intel ISA/PCI/CardBus PCIC probe:
Intel i82365sl B step rev 00 ISA-to-PCMCIA at port 0x3e0 ofs 0x00
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) = 3,9,10,15 status change on irq 15
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
cs: memory probe 0x0d0000-0x0dffff: clean.
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
VFS: Disk change detected on device fd(2,0)
VFS: Can't find an ext2 filesystem on dev fd(2,0).
VFS: Can't find a romfs filesystem on dev 02:00.
#cat /proc/interrupts
CPU0
0: 66198 XT-PIC timer
1: 1340 XT-PIC keyboard
2: 0 XT-PIC cascade
6: 234 XT-PIC floppy
13: 1 XT-PIC fpu
15: 2 XT-PIC i82365
#cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
03e0-03e1 : i82365
03f0-03f5 : floppy
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
#lsmod
Module Size Used by
3c574_cs 9956 0 (unused)
ds 6252 0 [3c574_cs]
i82365 22308 2
pcmcia_core 50784 0 [3c574_cs ds i82365]
vfat 9452 1
fat 30304 1 [vfat]
floppy 46824 1
Bonder
Więcej informacji o liście dyskusyjnej pld-users-pl