[ac] dziwnie wolny dysk

[Tomasz Witek]

W liście z wto, 16-12-2003, godz. 12:06, Piotr Gieron pisze: 
> >a teraz:
> >
> >
> ># hdparm -i /dev/hda
> 
> /dev/hda:
> 
>  Model=WDC WD800JB-00ETA0, FwRev=77.07W77, SerialNo=WD-WCAHL3614614
>  Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs 
> FmtGapReq }
>  RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
>  BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, 
> MultSect=16
>  CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
>  IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>  PIO modes:  pio0 pio1 pio2 pio3 pio4 
>  DMA modes:  mdma0 mdma1 mdma2 
>  UDMA modes: udma0 udma1 *udma2 
>  AdvancedPM=no WriteCache=enabled
>  Drive conforms to: device does not report version: 
> 
>  * signifies the current active mode
> 
> po opcjach: # /sbin/hdparm -c1 -d1 -X66 -m16 -a16 -u1  /dev/hda

co to za debilny kontroler ?
zaladuj sterownik od kontrolera ide.

TiweK

-- 
Tomasz Witek <tiwek w manta.univ.gda.pl>