Boje z scsi

[Bonder]

Mam problem z nagrywareczką LG x 52
chciałbym używać programu Xcdroast, więc ładuje 
sobie moduł ide-scsi, który ładuje się bardzo długo
przyczym dmesg wyswietla mi komunikaty w stylu 

SCSI host 0 abort (pid 3) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 1,
lun 0 Inquiry 00 00 00 ff 00 
....
SCSI host 0 abort (pid 3) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: ATAPI reset timed-out, status=0xd1
ide1: reset: success
hdd: status error: status=0x51 { DriveReady SeekComplete Error }
hdd: status error: error=0x04
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
hdd: status error: status=0x51 { DriveReady SeekComplete Error }
...
scsi : aborting command due to timeout : pid 4, scsi0, channel 0, id 1,
lun 0 Inquiry 00 00 00 ff 00 
SCSI host 0 abort (pid 4) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 abort (pid 5) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdd: ATAPI reset timed-out, status=0xd1
ide1: reset: success
hdd: status error: status=0x51 { DriveReady SeekComplete Error }
hdd: status error: error=0x04
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted

ale w koncu niby go ładuje
moj lsmod po tym wyglada mniej więcej tak
Module                  Size  Used by    Tainted: P  
sg                     28644   0  (autoclean) (unused)
ide-scsi                7456   0 
scsi_mod               86440   2  [sg ide-scsi]
ipv6                  124608  -1  (autoclean)
eepro100               17264   1  (autoclean)
ne2k-pci                4768   1  (autoclean)
8390                    5824   0  (autoclean) [ne2k-pci]
nls_iso8859-1           2880   3  (autoclean)
nls_cp437               4384   3  (autoclean)
vfat                    9244   3  (autoclean)
fat                    28952   0  (autoclean) [vfat]
ipchains               37788   1 
ospm_system             5836   0  (unused)
ospm_processor          5448   0  (unused)
ospm_button             3136   0  (unused)
ospm_busmgr            11072   0  [ospm_system ospm_processor
ospm_button]
rtc                     5852   0  (autoclean)
unix                   13828  27  (autoclean)
reiserfs              166632   3  (autoclean)
ide-disk                9420   7  (autoclean)
ide-probe-mod           8496   0  (autoclean)
ide-mod               157184   7  (autoclean) [ide-scsi ide-disk
ide-probe-mod]

nastepnie próbuje cdrecord -scanbus, ale on mi wyświetla komunikat 
Cdrecord 1.11a35 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open
SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
are root.

Oczywiście robiłem go jako root

a dmesg daje wtedy pare takich komunikatów
g: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected


Czy ktoś może mi pomóc w tej sprawie

Kernel 2.4.19


Bonder