IMQ

[Stacho Pal]

On Thu, 20 Mar 2003, Grzegorz Saracki wrote:
> kernel-2.4.19-2.8 z ftp://ftp.pld.org.pl/people/jack/Ra+2.4.19/i686/
> 
> # ip l
> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> 2: imq0: <NOARP,UP> mtu 1500 qdisc htb qlen 30
>     link/void
> 3: imq1: <NOARP> mtu 1500 qdisc noop qlen 30
>     link/void
> 4: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 576 qdisc htb qlen 100
>     link/ether 00:30:4f:12:82:43 brd ff:ff:ff:ff:ff:ff
> 5: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
>     link/ether 00:02:1e:f2:41:75 brd ff:ff:ff:ff:ff:ff
> 6: sit0 w NONE: <NOARP> mtu 1480 qdisc noop
>     link/sit 0.0.0.0 brd 0.0.0.0
> 
> # tc class show dev imq0
> class htb 1:1 root rate 1500Kbit ceil 1500Kbit burst 20Kb cburst 599b
> class htb 1:10 parent 1:1 leaf ... itd
> 
> wiec chyba działa, interfejsy imq0 i 1 mam od momentu jak zainstalowałem 2.4.19

Zropiłeś: ip link set imq0 up ?

Tak samo dla imq1.

Bo inaczej jest, ale nie działa. ;)
-------------
pzdr
Stacho Pal