Jak sprawdzic dysk twardy ??

[Arkadiusz Miskiewicz]

Dnia Monday 16 of February 2004 20:34, Pawel Koska napisał:

> Jakie komendy wykonac ??
Sprawdz s.m.a.r.t.a np na dobrym dysku

smartctl -a /dev/hde
[...]
SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [Use the smartctl -t option to run these.]

natomiast taki ktory nieco mi zgrzyta

SMART Error Log Version: 1
ATA Error Count: 9 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.

Error 9 occurred at disk power-on lifetime: 1248 hours
  When the command that caused the error occurred, the device was active or 
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 bf b0 af e0  Error: ICRC, ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  25 00 28 98 b0 af e0 00   66413.480  READ DMA EXT
  25 00 28 98 b0 af e0 00   66413.470  READ DMA EXT
  10 00 3f 00 00 00 e0 00   66415.572  RECALIBRATE [OBS-4]
  25 00 28 98 b0 af e0 00   66414.860  READ DMA EXT
  25 00 28 98 b0 af e0 00   66414.860  READ DMA EXT

Error 8 occurred at disk power-on lifetime: 1248 hours
  When the command that caused the error occurred, the device was active or 
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 bf b0 af e0  Error: ICRC, ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  25 00 28 98 b0 af e0 00   66413.480  READ DMA EXT
  10 00 3f 00 00 00 e0 00   66413.470  RECALIBRATE [OBS-4]
  25 00 28 98 b0 af e0 00   66413.463  READ DMA EXT
  25 00 28 98 b0 af e0 00   66414.860  READ DMA EXT
  25 00 18 08 62 bc e0 00   66414.860  READ DMA EXT

> Pawel

-- 
Arkadiusz Miśkiewicz     CS at FoE, Wroclaw University of Technology
arekm.pld-linux.org, 1024/3DB19BBD, JID: arekm.jabber.org, PLD/Linux