Wrazenia z upgrade'u kernela (dlugie, bez wordwrap'a)

[Andrzej Zawadzki]

Grzegorz Żebrowski wrote:
> Witam,
> 
> mialem dzis troche czasu, wiec postanowilem upgrade'nac sobie conieco ( padlo na kernel )
> 
> wszystko fajnie przeszlo, resecik i boom :)
> (nie wstalo polaczenie z internetem)
> 
> ponizej zamieszczam co ciekawsze fragmenty z logow:

[ciach] ten typ tak ma ;-)
1-go się pozbędziesz jak /initrd sobie zrobisz - zbędne

> May  5 14:58:29 router There is already a security framework initialized, register_security failed.
> May  5 14:58:29 router Failure registering capabilities with the kernel
> May  5 14:58:29 router selinux_register_security:  Registering secondary module capability
> May  5 14:58:29 router Capability LSM initialized
> 
> a teraz gwozdz programu:
> 
> May  5 14:58:29 router drivers/usb/core/usb.c: registered new driver usbfs
> May  5 14:58:29 router drivers/usb/core/usb.c: registered new driver hub
> May  5 14:58:29 router USB Universal Host Controller Interface driver v2.2
> May  5 14:58:29 router uhci_hcd 0000:00:07.2: VIA Technologies, Inc. USB
> May  5 14:58:29 router uhci_hcd 0000:00:07.2: irq 15, io base 0000d400
> May  5 14:58:29 router uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> May  5 14:58:29 router hub 1-0:1.0: USB hub found
> May  5 14:58:29 router hub 1-0:1.0: 2 ports detected
> May  5 14:58:29 router [eagle-usb] driver V2 loaded
> May  5 14:58:29 router drivers/usb/core/usb.c: registered new driver eagle-usb
> May  5 14:58:29 router usb 1-1: new full speed USB device using address 2
> May  5 14:58:29 router [eagle-usb] New pre-firmware modem detected
> May  5 14:58:29 router [eagle-usb] Uploading firmware..
> May  5 14:58:29 router [eagle-usb] Binding eu_instance_t to USB 001/002
> May  5 14:58:29 router usb 1-1: USB disconnect, address 2
> May  5 14:58:29 router [eagle-usb] Pre-firmware modem removed
> May  5 14:58:29 router usb 1-1: new full speed USB device using address 3
> May  5 14:58:29 router [eagle-usb] New USB ADSL device detected, waiting for DSP code...
> May  5 14:58:29 router printing eip:
> May  5 14:58:29 router cc9fb7b1
> May  5 14:58:29 router Oops: 0000 [#1]
> May  5 14:58:29 router CPU:    0
> May  5 14:58:29 router EIP:    0060:[<cc9fb7b1>]    Not tainted
> May  5 14:58:29 router EFLAGS: 00010296   (2.6.5)
> May  5 14:58:29 router EIP is at usb_disable_interface+0x11/0x50 [usbcore]
> May  5 14:58:29 router eax: cb235400   ebx: 00000000   ecx: 00000282   edx: c12df680
> May  5 14:58:29 router esi: 00000002   edi: 00000000   ebp: cb60fd7c   esp: cb60fd6c
> May  5 14:58:29 router ds: 007b   es: 007b   ss: 0068
> May  5 14:58:29 router Process khubd (pid: 828, threadinfo=cb60e000 task=cb6132e0)
> May  5 14:58:29 router Stack: cb235400 cb235400 00000002 00000008 cb60fdb4 cc9fb9f3 00000001 00000008
> May  5 14:58:29 router 00000002 00000000 00000000 00001388 00000000 cb3d1f40 c12df680 cb43c800
> May  5 14:58:29 router cca2fb20 cca30f80 cb60fe18 cca2d6ef 80000000 00000000 00000000 00000000
> May  5 14:58:29 router Call Trace:
> May  5 14:58:29 router [<cc9fb9f3>] usb_set_interface+0x93/0x160 [usbcore]
> May  5 14:58:29 router [<cca2fb20>] ctrl_urb_q_watcher+0x0/0xb0 [eagle_usb]
> May  5 14:58:29 router [<cca30f80>] WatchdogTimer+0x0/0x130 [eagle_usb]
> May  5 14:58:29 router [<cca2d6ef>] eu_init_postfirm+0x38f/0x650 [eagle_usb]
> May  5 14:58:29 router [<cca2d16e>] eu_probe+0x16e/0x220 [eagle_usb]
> May  5 14:58:29 router [<c01678ea>] d_instantiate+0x4a/0x60
> May  5 14:58:29 router [<cc9f6076>] usb_probe_interface+0x56/0x70 [usbcore]
> May  5 14:58:29 router [<c01ea855>] bus_match+0x35/0x70
> May  5 14:58:29 router [<c01ea8ca>] device_attach+0x3a/0xa0
> May  5 14:58:29 router [<c0183f89>] sysfs_create_group+0x49/0x80
> May  5 14:58:29 router [<c01eaac7>] bus_add_device+0x67/0xa0
> May  5 14:58:29 router [<c01e9954>] device_add+0x94/0x140
> May  5 14:58:29 router [<cc9fbd78>] usb_set_configuration+0x1c8/0x260 [usbcore]
> May  5 14:58:29 router [<cc9f710d>] usb_new_device+0x24d/0x3c0 [usbcore]
> May  5 14:58:29 router [<c01200d2>] printk+0x112/0x140
> May  5 14:58:29 router [<cc9f88aa>] hub_port_connect_change+0x17a/0x280 [usbcore]
> May  5 14:58:29 router [<cc9f8c07>] hub_events+0x257/0x2b0 [usbcore]
> May  5 14:58:29 router [<cc9f8c95>] hub_thread+0x35/0xf0 [usbcore]
> May  5 14:58:29 router [<c011cb10>] default_wake_function+0x0/0x10
> May  5 14:58:29 router [<cc9f8c60>] hub_thread+0x0/0xf0 [usbcore]
> May  5 14:58:29 router [<c01072a5>] kernel_thread_helper+0x5/0x10
> May  5 14:58:29 router
> May  5 14:58:29 router Code: 80 7b 04 00 74 25 31 f6 8d b4 26 00 00 00 00 8b 43 0c 47 0f
> May  5 14:58:29 router <6>NET: Registered protocol family 10
> 
> kernel-2.6.5-1
> kernel-usb-eagle-1.9.6-0.3 w 2.6.5_1

Mam to samo, a najciekawsze jest to, że _ZAWASZE_ co drugi restart :-)

> na 2.6.4 wszystko dziala, tylko ze teraz [1] rowniez wystepuje

Błędy z initrd? Mam od dawna...

A
VFS: Busy inodes after unmount. Self-destruct in 5 seconds.

Od jakiegoś ~2.6.1

-- 
Andrzej Zawadzki