uhci_hcd + eagle-usb == oops

[pbern@pbern.biz]

Jak w temacie... 
eagle-usb-1.9.6-0.3
kernel-usb-eagle-1.9.6-0.3 w 2.6.5_1

Czy ktos zna jakies lekarstwo na to.. (poza zmiana modemu na taki z portem 
eth?) 

I wystepuje blad:
May 17 12:03:22 barp2 kernel: drivers/usb/core/usb.c: registered new driver usbfs
May 17 12:03:22 barp2 kernel: drivers/usb/core/usb.c: registered new driver hub
May 17 12:03:22 barp2 kernel: USB Universal Host Controller Interface driver v2.2
May 17 12:03:22 barp2 kernel: uhci_hcd 0000:00:07.2: VIA Technologies, Inc. USB
May 17 12:03:22 barp2 kernel: uhci_hcd 0000:00:07.2: irq 11, io base 0000e400
May 17 12:03:22 barp2 kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
May 17 12:03:22 barp2 kernel: hub 1-0:1.0: USB hub found
May 17 12:03:22 barp2 kernel: hub 1-0:1.0: 2 ports detected
May 17 12:03:22 barp2 kernel: usb 1-2: new full speed USB device using address 2
May 17 12:03:22 barp2 kernel: drivers/usb/core/usb.c: registered new driver hiddev
May 17 12:03:22 barp2 kernel: drivers/usb/core/usb.c: registered new driver hid
May 17 12:03:22 barp2 syslog-ng: syslog-ng startup  succeeded
May 17 12:03:22 barp2 kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
May 17 12:03:22 barp2 kernel: [eagle-usb] driver V2 loaded
May 17 12:03:22 barp2 kernel: [eagle-usb] New pre-firmware modem detected
May 17 12:03:22 barp2 kernel: [eagle-usb] Uploading firmware..
May 17 12:03:22 barp2 kernel: [eagle-usb] Binding eu_instance_t to USB 001/002
May 17 12:03:22 barp2 kernel: drivers/usb/core/usb.c: registered new driver eagle-usb
May 17 12:03:22 barp2 kernel: usb 1-2: USB disconnect, address 2
May 17 12:03:22 barp2 kernel: [eagle-usb] Pre-firmware modem removed
May 17 12:03:22 barp2 kernel: usb 1-2: new full speed USB device using address 3
May 17 12:03:22 barp2 kernel: [eagle-usb] New USB ADSL device detected, waiting for DSP code...
May 17 12:03:22 barp2 kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000004
May 17 12:03:22 barp2 kernel: printing eip:
May 17 12:03:22 barp2 kernel: c49687b1
May 17 12:03:22 barp2 kernel: *pde = 00000000
May 17 12:03:22 barp2 kernel: Oops: 0000 [#1]
May 17 12:03:22 barp2 kernel: CPU:    0
May 17 12:03:22 barp2 kernel: EIP:    0060:[<c49687b1>]    Not tainted
May 17 12:03:22 barp2 kernel: EFLAGS: 00010296   (2.6.5)
May 17 12:03:22 barp2 kernel: EIP is at usb_disable_interface+0x11/0x50 [usbcore]
May 17 12:03:22 barp2 kernel: eax: c3bed800   ebx: 00000000   ecx: 00000282   edx: c3fa4a80
May 17 12:03:22 barp2 kernel: esi: 00000002   edi: 00000000   ebp: c3c0fd7c   esp: c3c0fd6c
May 17 12:03:22 barp2 kernel: ds: 007b   es: 007b   ss: 0068
May 17 12:03:22 barp2 kernel: Process khubd (pid: 286, threadinfo=c3c0e000 task=c3f98720)
May 17 12:03:22 barp2 kernel: Stack: c3bed800 c3bed800 00000002 00000008 c3c0fdb4 c49689f3 00000001 00000008
May 17 12:03:22 barp2 kernel: 00000002 00000000 00000000 00001388 00000000 
c124ff40 c3fa4a80 c3806800
May 17 12:03:22 barp2 kernel: c49b4b20 c49b5f80 c3c0fe18 c49b26ef 80000000 
00000000 00000000 00000001
May 17 12:03:22 barp2 kernel: Call Trace:
May 17 12:03:22 barp2 kernel: [<c49689f3>] usb_set_interface+0x93/0x160 
[usbcore]
May 17 12:03:22 barp2 kernel: [<c49b4b20>] ctrl_urb_q_watcher+0x0/0xb0 
[eagle_usb]
May 17 12:03:22 barp2 kernel: [<c49b5f80>] WatchdogTimer+0x0/0x130 
[eagle_usb]
May 17 12:03:22 barp2 kernel: [<c49b26ef>] eu_init_postfirm+0x38f/0x650 
[eagle_usb]
May 17 12:03:22 barp2 kernel: [<c010b090>] handle_IRQ_event+0x40/0x70
May 17 12:03:22 barp2 kernel: [<c010b3af>] do_IRQ+0x8f/0xe0
May 17 12:03:22 barp2 kernel: [<c49b216e>] eu_probe+0x16e/0x220 
[eagle_usb]
May 17 12:03:22 barp2 kernel: [<c4963076>] usb_probe_interface+0x56/0x70 
[usbcore]
May 17 12:03:22 barp2 kernel: [<c01ea855>] bus_match+0x35/0x70
May 17 12:03:22 barp2 kernel: [<c01ea8ca>] device_attach+0x3a/0xa0
May 17 12:03:22 barp2 kernel: [<c0183f89>] sysfs_create_group+0x49/0x80
May 17 12:03:22 barp2 kernel: [<c01eaac7>] bus_add_device+0x67/0xa0
May 17 12:03:22 barp2 kernel: [<c01e9954>] device_add+0x94/0x140
May 17 12:03:22 barp2 kernel: [<c4968d78>] 
usb_set_configuration+0x1c8/0x260 [usbcore]
May 17 12:03:22 barp2 kernel: [<c496410d>] usb_new_device+0x24d/0x3c0 
[usbcore]
May 17 12:03:22 barp2 kernel: [<c01200d2>] printk+0x112/0x140
May 17 12:03:22 barp2 pppd[1566]: Couldn't get channel number: 
Input/output error
May 17 12:03:22 barp2 pppd[1566]: Couldn't get channel number: 
Input/output error
May 17 12:03:22 barp2 pppd[1566]: Couldn't get channel number: 
Input/output error
May 17 12:03:22 barp2 pppd[1566]: Couldn't get channel number: 
Input/output error
May 17 12:03:22 barp2 pppd[1566]: Using interface ppp0
May 17 12:03:22 barp2 kernel: [<c49658aa>] 
hub_port_connect_change+0x17a/0x280 [usbcore]
May 17 12:03:22 barp2 kernel: [<c4965c07>] hub_events+0x257/0x2b0 
[usbcore]
May 17 12:03:22 barp2 kernel: [<c4965c95>] hub_thread+0x35/0xf0 [usbcore]
May 17 12:03:22 barp2 kernel: [<c011cb10>] default_wake_function+0x0/0x10
May 17 12:03:22 barp2 kernel: [<c4965c60>] hub_thread+0x0/0xf0 [usbcore]
May 17 12:03:22 barp2 kernel: [<c01072a5>] kernel_thread_helper+0x5/0x10
May 17 12:03:22 barp2 kernel:
May 17 12:03:22 barp2 kernel: Code: 80 7b 04 00 74 25 31 f6 8d b4 26 00 00 
00 00 8b 43 0c 47 0f
May 17 12:03:22 barp2 kernel: <6>8139too Fast Ethernet driver 0.9.27



Pozdrawiam
Pawel Bernadowski
GG 3377, email kontakt w pbern.biz