problem z cups

[Tomek]

Mam problem z drukarką OKIPAGE B4350 (usb) ktora skonfigurowalem na cups-ie
A moze raczej cos nie wyszlo? (na windowsie wszystko dzialalo !!!)
Na poczatku mialem problem ze sterownikem do niej ale odnalazlem cos na PPD
ze strony oki i dystrybucji suse(manufacturer-PPDs-0.3-3.i586.rpm), ale 
zaden z nich nie dziala, tzn:
instaluje drukarke, zaznaczam sterownik, wszystko idzie glatko ale kiedy 
chce cos wydrukowac to nic sie nie dzieje
usbview pokazuje:
----------------------------------------
USB Device
Manufacturer: OKI DATA CORP
Speed: 12Mb/s (full)
USB Version:  1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 06bc
Product Id: 0083
Revision Number:  1.01

Config Number: 1
    Number of Interfaces: 1
    Attributes: c0
    MaxPower Needed:   0mA

    Interface Number: 0
        Name: usblp
        Alternate Number: 0
        Class: 07(print)
        Sub Class: 1
        Protocol: 2
        Number of Endpoints: 2

            Endpoint Address: 01
            Direction: out
            Attribute: 2
            Type: Bulk
            Max Packet Size: 64
            Interval: 0ms

            Endpoint Address: 82
            Direction: in
            Attribute: 2
            Type: Bulk
            Max Packet Size: 64
            Interval: 0ms
-----------------------------------------
wiec system widzi ale nic nie reaguje, tyle ze na drukarce pojawia sie 
napis na wyswietlaczu: invalid data

Nie wiem jak sobie z tym poradzic
lsmod wyrzuca:
-------------------------------------------------------------------
# lsmod | grep usb
usbmouse                3072  0
usbhid                 34560  0
usblp                   8576  0
usb_storage            52288  0
scsi_mod               55360  2 sg,usb_storage
usbcore                77668  9 
usbmouse,usbhid,usblp,ohci_hcd,usb_storage,uhci_hcd,ehci_hcd
ide_core               92416  4 ide_cd,usb_storage,ide_disk,amd74xx
----------------------------------------------------------------------------------
W /var/log/cups tez nic nie widze:

root w bestguest cups $ cat error_log
I [05/Jan/2005:04:07:44 +0100] Listening to 0:631
I [05/Jan/2005:04:07:44 +0100] Loaded configuration file 
"/etc/cups/cupsd.conf"
I [05/Jan/2005:04:07:44 +0100] Configured for up to 100 clients.
I [05/Jan/2005:04:07:44 +0100] Allowing up to 100 client connections per 
host.
I [05/Jan/2005:04:07:44 +0100] Full reload is required.
I [05/Jan/2005:04:07:44 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 303 
PPDs...
I [05/Jan/2005:04:07:44 +0100] LoadPPDs: No new or changed PPDs...
I [05/Jan/2005:04:07:44 +0100] Full reload complete.
I [05/Jan/2005:04:07:50 +0100] Adding start banner page "none" to job 14.
I [05/Jan/2005:04:07:50 +0100] Adding end banner page "none" to job 14.
I [05/Jan/2005:04:07:50 +0100] Job 14 queued on 'B4350' by 'tomek'.
I [05/Jan/2005:04:07:50 +0100] Started filter 
/usr/lib/cups/filter/texttops (PID 9592) for job 14.
I [05/Jan/2005:04:07:50 +0100] Started filter 
/usr/lib/cups/filter/pstops (PID 9593) for job 14.
I [05/Jan/2005:04:07:50 +0100] Started backend /usr/lib/cups/backend/usb 
(PID 9594) for job 14.

root w bestguest cups $ cat
access_log  error_log   page_log

root w bestguest cups $ cat page_log
B4350 tomek 14 [05/Jan/2005:04:07:50 +0100] 1 1 - localhost

Na LPRng nie moge znalezc sterownikow do tej dukarki.

Czy jest ktos kto by mi pomogl?
Ja juz nie mam pomyslow !!!

Prosze o pomoc !
Pozdrawiam Tomek