Nagrywanie płyt audio - kernel 2.6.10

[DoubleX]

Wita, usilnie staram się nagrac płytke audio mając pod k3b kernel  
2.6.10-0.96, ale za każdym razem wyskakuje mi taki komunikat:
System
-----------------------
K3b Version:0.11.18
KDE Version: 3.3.2
QT Version: 3.3.3

cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.10-0.96
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4  
or Solaris.
/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set  
RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using  
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg  
Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'CD-RW  CRX230E  '
Revision       : 'QYS1'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1422080 = 1388 KB
FIFO size      : 4194304 = 4096 KB
Encoding speed : 184x (13788 sectors/s) for libedc from Heiko Eißfeldt
/usr/bin/cdrecord: Operation not permitted. prevent/allow medium removal:  
scsi sendcmd: no error
CDB:  1E 00 00 00 01 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set  
RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using  
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Trying to use high speed medium on low speed writer.
/usr/bin/cdrecord: Operation not permitted. prevent/allow medium removal:  
scsi sendcmd: no error
CDB:  1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was  
0%.
pregap1: -1
Track 01: audio  731 MB (72:29.86) no preemp swab copy
Total size:      731 MB (72:29.86) = 326240 sectors
Lout start:      732 MB (72:31/65) = 326240 sectors
Current Secsize: 2048
ATIP info from disk:
   Indicated writing power: 2
   Reference speed: 6
   Is not unrestricted
   Is erasable
   Disk sub type: High speed Rewritable (CAV) media (1)
   ATIP start of lead in:  -12374 (97:17/01)
   ATIP start of lead out: 359849 (79:59/74)
   1T speed low:  4 1T speed high: 10
   2T speed low:  2 2T speed high: 10
   power mult factor: 2 6
   recommended erase/write power: 5
   A1 values: 24 2C DC
   A2 values: 14 A4 4A
   A3 values: 02 D2 80
Disk type:    Phase change
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 33609
Forcespeed is OFF.
BURN-Free was never needed.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=52 -raw96r  
driveropts=burnfree -eject -overburn -useinfo -pad -shorttrack -audio  
/home/pafciu/tmp/k3b_audio_0_01.inf

Czy ktoś mógłby mi wyjasnić o co chodzi? tak przełożyć to na mój. Dziękuję.