pendrive

[Tomasz Grobelny]

Mam 2 pendrive'y. Jeden funkcjonuje idealnie i podczas podłączania produkuje w 
logach coś takiego:
> May  9 19:33:58 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 32
> May  9 19:33:58 grobelny kernel: scsi100 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:34:03 grobelny kernel: Vendor: USB 2.0   Model: Mobile Disk N4S   
Rev: 1.00
> May  9 19:34:03 grobelny kernel: Type:   Direct-Access                      
ANSI SCSI revision: 02
> May  9 19:34:03 grobelny kernel: SCSI device sda: 507904 512-byte hdwr 
sectors (260 MB)
> May  9 19:34:03 grobelny kernel: sda: assuming Write Enabled
> May  9 19:34:03 grobelny kernel: SCSI device sda: 507904 512-byte hdwr 
sectors (260 MB)
> May  9 19:34:03 grobelny kernel: sda: assuming Write Enabled
> May  9 19:34:03 grobelny kernel: /dev/scsi/host100/bus0/target0/lun0: p1
> May  9 19:34:03 grobelny kernel: Attached scsi removable disk sda at 
scsi100, channel 0, id 0, lun 0
> May  9 19:34:03 grobelny kernel: Attached scsi generic sg0 at scsi100, 
channel 0, id 0, lun 0,  type 0
> May  9 19:34:04 grobelny scsi.agent[14268]: disk 
at /devices/pci0000:00/0000:00:14.2/usb5/5-4/5-4:1.0/host100/target100:0:0/100:0:0:0

a drugi jest jakiś podejrzany. W logach dostaję:

> May  9 19:33:27 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 9
> May  9 19:33:27 grobelny kernel: scsi85 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:28 grobelny kernel: usb 5-4: USB disconnect, address 9
> May  9 19:33:28 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 10
> May  9 19:33:28 grobelny kernel: scsi86 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:28 grobelny kernel: usb 5-4: USB disconnect, address 10
> May  9 19:33:28 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 11
> May  9 19:33:29 grobelny kernel: scsi87 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:29 grobelny kernel: usb 5-4: USB disconnect, address 11
> May  9 19:33:29 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 12
> May  9 19:33:29 grobelny kernel: scsi88 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:30 grobelny kernel: usb 5-4: USB disconnect, address 12
> May  9 19:33:30 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 13
> May  9 19:33:30 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 15
> May  9 19:33:30 grobelny kernel: scsi89 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:31 grobelny kernel: usb 5-4: USB disconnect, address 15
> May  9 19:33:31 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 16
> May  9 19:33:31 grobelny kernel: scsi90 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:32 grobelny kernel: usb 5-4: USB disconnect, address 16
> May  9 19:33:32 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 17
> May  9 19:33:32 grobelny kernel: scsi91 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:32 grobelny kernel: usb 5-4: USB disconnect, address 17
> May  9 19:33:32 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 18
> May  9 19:33:33 grobelny kernel: scsi92 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:33 grobelny kernel: usb 5-4: USB disconnect, address 18
> May  9 19:33:33 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 19
> May  9 19:33:33 grobelny kernel: scsi93 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:34 grobelny kernel: usb 5-4: USB disconnect, address 19
> May  9 19:33:34 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 20
> May  9 19:33:34 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 21
> May  9 19:33:34 grobelny kernel: scsi94 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:35 grobelny kernel: usb 5-4: USB disconnect, address 21
> May  9 19:33:35 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 22
> May  9 19:33:35 grobelny kernel: scsi95 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:36 grobelny kernel: usb 5-4: USB disconnect, address 22
> May  9 19:33:36 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 23
> May  9 19:33:37 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 25
> May  9 19:33:37 grobelny kernel: scsi96 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:37 grobelny kernel: usb 5-4: USB disconnect, address 25
> May  9 19:33:37 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 26
> May  9 19:33:37 grobelny kernel: scsi97 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:38 grobelny kernel: usb 5-4: USB disconnect, address 26
> May  9 19:33:38 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 27
> May  9 19:33:38 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 28
> May  9 19:33:39 grobelny kernel: scsi98 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:39 grobelny kernel: usb 5-4: USB disconnect, address 28
> May  9 19:33:39 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 29
> May  9 19:33:39 grobelny kernel: scsi99 : SCSI emulation for USB Mass 
Storage devices
> May  9 19:33:40 grobelny kernel: usb 5-4: USB disconnect, address 29
> May  9 19:33:40 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 30
> May  9 19:33:40 grobelny kernel: usb 5-4: new high speed USB device using 
ehci_hcd and address 31

Co może być tego przyczyną? Ktoś się z tym spotkał? Może da się jakoś dobrać 
do tego adresu 31? Jakiś dodatkowy moduł jest potrzebny?

Tomek