Cdrom na SATA

[Maciej Pijanka]

05-11-22, Ryszard Mielcarek <crazy w noshit.pl> napisał(a):
> Dnia Tue, 22 Nov 2005 17:58:30 +0100 Maciej Pijanka
> <maciej.pijanka w gmail.com> napisał:
>
>
>
> > a jak widzisz cdzlom w systemie? jako cdrom scsi? skoro sata jest
> > widoczne jako scsi..
> >  bo jesli tak to moze /dev/sr0
>
> Niestety..
>
> W dmesgu :
>
> libata version 1.12 loaded.
> ahci version 1.01
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low)
> -> IRQ 5 ACPI: PCI interrupt for device 0000:00:1f.2 disabled
> ahci: probe of 0000:00:1f.2 failed with error -12
> ata_piix version 1.04
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low)
> -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
> ata1: dev 0 cfg 49:2b00 82:346b 83:5b29 84:4003 85:3469 86:1a09 87:4003
> 88:203f ata1: dev 0 ATA, max UDMA/100, 117210240 sectors:
> ata1(0): applying bridge limits
> ata1: dev 0 configured for UDMA/100
> scsi0 : ata_piix
>   Vendor: ATA       Model: FUJITSU MHT2060A  Rev: 006C
>   Type:   Direct-Access                      ANSI SCSI revision: 05
> ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
> ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000
> 88:0407 ata2: dev 0 ATAPI, max UDMA/33
> ata2: dev 0 configured for UDMA/33
> scsi1 : ata_piix
> SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
> SCSI device sda: drive cache: write back
>  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>
> Koniec.
> Ani slowa o jakimkolwiek device dla CD.
> Spróbuje jeszcze raz make clean; make , moze mialem cos nie tak ze
> zrodlami....
>

a tak z glupia modprobe sr ?
bo jesli w /proc/scsi/scsi widac jakies urzadzenie SCSI to raczej jest
obslugiwalne via scsi..


--
Maciej Pijanka