lm_sensors - dziwne zachowanie

[pbern w pbern.biz]

Witam,

zainstalowalem i skonfigurowalem lm_sensors ale zachowuje sie dziwnie:

[root w coldfusion /etc]# sensors
w83627ehf-isa-0290
Adapter: ISA adapter
Case Fan:    0 RPM  (min = 1205 RPM, div = 16)
CPU Fan:  1591 RPM  (min = 1704 RPM, div = 8)
fan3:        0 RPM  (min =   65 RPM, div = 128)
fan4:        0 RPM  (min = 10546 RPM, div = 128)
Sys Temp:    +33 C  (high =   +45 C, hyst =   +40 C)
CPU Temp:  +54.0 C  (high = +45.0 C, hyst = +40.0 C)
temp3:     +18.5 C  (high = +80.0 C, hyst = +75.0 C)
-------------------------------OK---------------------

[root w coldfusion /etc]# /etc/rc.d/init.d/sensors restart
Stopping sensors daemon service....................................[ DIED ]
Loading i2c-isa kernel module(s)...................................[ DONE ]
Loading w83627ehf kernel module(s).................................[ DONE ]
Starting sensors daemon service....................................[ DONE ]
-------------- error --- i tak caly czas - dodatkowo w logu--------

Jun 19 01:11:39 coldfusion sensors: sensord shutdown  failed
Jun 19 01:11:39 coldfusion sensord: sensord started
Jun 19 01:11:39 coldfusion sensord: Chip: w83627ehf-isa-0290
Jun 19 01:11:39 coldfusion sensord: Adapter: ISA adapter
Jun 19 01:11:39 coldfusion sensord:   Case Fan: 0 RPM (min = 1205 RPM, div 
= 8)
Jun 19 01:11:39 coldfusion sensord:   CPU Fan: 1577 RPM (min = 1704 RPM, 
div = 8)
Jun 19 01:11:39 coldfusion sensord:   fan3: 0 RPM (min = 65 RPM, div = 
128)
Jun 19 01:11:39 coldfusion sensord:   fan4: 0 RPM (min = 10546 RPM, div = 
128)
Jun 19 01:11:39 coldfusion sensord: Error getting sensor data: 
w83627ehf/#35: Can't access procfs/sysfs file
Jun 19 01:11:39 coldfusion sensord: sensord failed
Jun 19 01:11:39 coldfusion sensors: sensord startup  succeeded


Ale juz
[root w coldfusion log]# /etc/rc.d/init.d/sensors status
sensors dead but subsys locked
w83627ehf-isa-0290
Adapter: ISA adapter
Case Fan:    0 RPM  (min = 1205 RPM, div = 16)
CPU Fan:  1577 RPM  (min = 1704 RPM, div = 8)
fan3:        0 RPM  (min =   65 RPM, div = 128)
fan4:        0 RPM  (min = 10546 RPM, div = 128)
Sys Temp:    +34 C  (high =   +45 C, hyst =   +40 C)
CPU Temp:  +54.0 C  (high = +45.0 C, hyst = +40.0 C)
temp3:     +30.5 C  (high = +80.0 C, hyst = +75.0 C)

i wszystko pokazuje ok....

chcialbym miec ladnie historie w rrd, a srednio wiem jak sie zabrac aby 
sensors odczytywal tak jak powinien, co jakis czas....

Pozdrawiam
Pawel Bernadowski
GG 3377, email kontakt w pbern.biz