LILO

[sar4er]

Użytkownik krzysztof manijak napisał:
> Michal Abramowicz pisze:
> 
>> ale to nie jest zupełnie potrzebne, chyba że masz root-fs na dm_cośtam
>> to tylko warning.
> w sumie tak, ale trochę wnerwia ;)
> 

Więc tak:

#####################
/etc/lilo.conf
#####################
install=/boot/boot-bmp.b


bitmap=/boot/lilo-pldblack.bmp


bmp-colors=9,,,6,0,0


bmp-table=21,287p,2,4,175p


bmp-timer=73,29,7,0,0


default=pld


timeout=20


boot=/dev/hda


map=/boot/map


prompt


read-only


lba32





#Linux Image


image=/boot/vmlinuz


    root=/dev/hda3


    label=PLD


    initrd=/boot/initrd

##########################
/etc/modules
##########################
psmouse


usbmouse


usbkbd


ide-cd


intel_agp

##########################
/etc/modprobe.conf
##########################
alias eth0 8139too
alias scsi_hostadapter ata_piix

##########################
/etc/sysconfig/geninitrd
##########################
## Basic modules to be loaded


#BASICMODULES=""





## Modules that should be loaded before anything (i.e. jbd for ext3)


#PREMODS=""





## Should initrd be compressed?


COMPRESS=yes





## What filesystem to use (rom or ext2)?


# PLD Linux kernel has only romfs compiled in.


INITRDFS=rom





## Use udev to create /dev?


#USE_UDEV=no





## Should udev make device nodes for staticly linked devices as well?


#PROBSTATICMODULES=yes





## Use suspend to disk?


USE_SUSPEND=no





## Do install software suspend2 modules?


USE_SUSPEND2=no





## Should we use splash image?


# FB_SPLASH=yes





# sleep after module loading


#MODULE_qla2xxx_USLEEP="2000000"





# install firmware to initrd


#MODULE_qla2xxx_FIRMWARE="ql2300_fw.bin"

##########################
/etc/fstab
##########################
/dev/sda1       /boot           xfs     defaults        0 0


/dev/sda2       swap            swap    defaults        1 1


/dev/sda3       /               xfs     defaults        0 0


/dev/sda5       /var            xfs     defaults        0 0


/dev/sda6       /home/public    xfs     defaults        0 0


/dev/sda7       /home/users     xfs     defaults        0 0





none            /proc                   proc    defaults,noauto,gid=17
0 0

none            /sys                    sysfs   defaults,noauto,gid=17
0 0

none            /proc/bus/usb           usbfs
defaults,noauto,devgid=78,devmode=0664  0 0

none            /dev                    devfs   defaults,noauto
0 0

none            /dev/pts                devpts  gid=5,mode=620
0 0

none            /dev/cpuset             cpuset  defaults,noauto
0 0

#none           /dev/shm                tmpfs
mode=1777,nosuid,nodev,noexec           0 0




/dev/fd0        /media/floppy           auto    user,noauto
0 0

/dev/cdrom      /media/cdrom            auto    users,noauto
0 0




# Examples for mount vfat and ntfs patritions using fsctrl group


# ntfs on Linux 2.6.x


#/dev/hdXX      /mnt/ntfs       ntfs
user,noauto,umask=002,uid=0,gid=28,nls=iso8859-2 0 0

# ntfs on Linux 2.4.x


#/dev/hdXX      /mnt/ntfs       ntfs
user,noauto,umask=002,uid=0,gid=28,iocharset=iso8859-2 0 0

#/dev/hdXX      /mnt/vfat       vfat
user,noauto,umask=002,uid=0,gid=28,iocharset=iso8859-2,codepage=852,exec,showexec
0 0


tak robiłem zawsze i działało ... a teraz wywala mi ten wspaniały błąd:

[robert w verius]# lilo
/proc/misc: No entry for device-mapper found
ls device-mapper driver missing from kernel?
/dev/mapper/control: open failed: No such device
Failure to communicate with kernel device-mapper driver.
Fatal: Filesystem would be destroyed by LILO boot dector: /dev/sda

jeśli chodzi o ten device-mapper to mi to nie przeszkadza :) ... dziwi
mnie tylko ten błąd przy dodawaniu lilo ...