Problem z e1000 (PCI-X)

[ekanS]

Witam,

Widze ze od kernela 2.6.16.56-1(smp) modul e1000 nie jest juz jako 
osobna paczka, ale jako czesc pakietu (kernel-smp-2.6.16.56-1) i od tego 
momentu wczoraj zaczal sie moj problem :)

Mam w routerze dwie karty Intela :

02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet 
Controller (Copper) (rev 06)
         Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter
         Flags: bus master, fast devsel, latency 0, IRQ 177
         Memory at ff4e0000 (32-bit, non-prefetchable) [size=128K]
         Memory at ff4c0000 (32-bit, non-prefetchable) [size=128K]
         I/O ports at 9c00 [size=32]
         Expansion ROM at ff4a0000 [disabled] [size=128K]
         Capabilities: [c8] Power Management version 2
         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
         Capabilities: [e0] Express Endpoint IRQ 0
         Capabilities: [100] Advanced Error Reporting
         Capabilities: [140] Device Serial Number c2-ac-04-ff-ff-21-1b-00

05:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet 
Controller (rev 05)
         Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter
         Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 217
         Memory at ff7e0000 (32-bit, non-prefetchable) [size=128K]
         Memory at ff7c0000 (32-bit, non-prefetchable) [size=128K]
         I/O ports at bc00 [size=64]
         Expansion ROM at 40000000 [disabled] [size=128K]
         Capabilities: [dc] Power Management version 2
         Capabilities: [e4] PCI-X non-bridge device


Pierwsza jest na PCI-Express, druga na PCI
Wczesniej (<2.6.16.56-1) po zainstalowaniu i zaladowaniu modulu e1000 
mialem obie widoczne w systemie (`ip link`, /proc/interrupts) teraz 
widze tylko ta na PCI, a karta w PCI-E jest, ale wyglada jakby ten modul 
nie mail ochoty jej oblsugiwac.

Jakies pomysly?


PS w dmseg tylko tyle(w syslogu to samo)
# grep 02:00.0 dmesg
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
# grep 05:00.0 dmesg
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 217
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 217
e1000: 0000:05:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:07:a0:c6


Pozdrawiam,
daniel

-- 
Administrator sieci bermudy.net
         tel: 502345254
          gg:  4392320
        www.bermudy.net