Huawei E220

[mitlox]

Grzesiek Sójka wrote:
> Wywal default gw 192.168.0.2. Wtedy pppd bedzie poprawnie ustawial geteway.
>   
Skąd masz na myśli:
#/etc/sysconfig/network
GATEWAY=192.168.0.2
GATEWAYDEV=eth0 
 
# /etc/resolv.conf
nameserver 192.168.0.2
nameserver 213.191.92.84

# cat /etc/ppp/era-connect
TIMEOUT 600
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
SAY 'Startuję HDSPA'
"" ATZ
#OK 'AT+CPIN=3289'
OK 'ATE0V1&F&D2&C1&C2S0=0'
OK "ATE0V1"
OK "ATS7=60"
ABORT 'NO CARRIER'
SAY 'DIALING... \n'
OK 'ATDT*99#'

# cat /etc/ppp/peers/era-connect
noauth
connect "/usr/sbin/chat -v -f /etc/ppp/era-connect"
/dev/ttyUSB0
crtscts
lock
local
#defaultroute
nodetach
usepeerdns
lcp-echo-failure 4
lcp-echo-interval 65535
updetach