przesiadka na sata

[Piotr Grymkowski]

Dnia Sat, 10 May 2008 20:36:12 +0200
Sylwester Gruszka wrzucił(a) mi do skrzynki list o następującej treści:

> Dnia sobota, 10 maja 2008, Arkadiusz Rdest napisał:
> 
> > a co pokazuje "pcidev ide"?
> 
> 10de0265 amd74xx nVidia Corporation|MCP51 IDE
To ja mam tak:)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a
[Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Unknown
device 3fc1 Flags: bus master, 66MHz, fast devsel, latency 0
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
[size=1] I/O ports at ffa0 [size=16]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: AMD_IDE
	Kernel modules: ata_generic, pata_amd, amd74xx, generic
------------------------------------------------------------------------------------------------------------
[root w carnage ~]# lsmod
Module                  Size  Used by
usbhid                 40256  0 
ff_memless              6664  1 usbhid
cpufreq_ondemand        8336  1 
battery                 9992  0 
ac                      5896  0 
button                  7968  0 
tun                    10496  0 
binfmt_misc            11020  1 
ext3                  124560  1 
jbd                    54128  1 ext3
mbcache                 8200  1 ext3
kvm_amd                14356  0 
kvm                   108800  1 kvm_amd
i2c_isa                 5376  0 
nvidia               8644036  36 
powernow_k8            14112  1 
freq_table              4864  2 cpufreq_ondemand,powernow_k8
processor              26504  1 powernow_k8
loop                   16516  0 
ide_cd                 37920  0 
cdrom                  36008  1 ide_cd
ata_generic             7044  0 
pata_amd               11780  0 
firewire_ohci          17408  0 
firewire_core          35520  1 firewire_ohci
crc_itu_t               3712  1 firewire_core
amd74xx                15792  0 [permanent]
snd_hda_intel         277920  2 
snd_pcm                69384  1 snd_hda_intel
snd_timer              20104  1 snd_pcm
snd                    46824  7 snd_hda_intel,snd_pcm,snd_timer
rtc_cmos                8760  0 
rt61                  210704  1 
rtc_core               15244  1 rtc_cmos
rtc_lib                 4224  1 rtc_core
ohci1394               32072  0 
sdhci                  16524  0 
mmc_core               25480  1 sdhci
soundcore               7328  1 snd
generic                 6532  0 [permanent]
ieee1394               75992  1 ohci1394
snd_page_alloc          9104  2 snd_hda_intel,snd_pcm
ide_core              128552  3 ide_cd,amd74xx,generic
k8temp                  6400  0 
hwmon                   4104  1 k8temp
forcedeth              44168  0 
psmouse                36508  0 
i2c_nforce2             6528  0 
i2c_core               19456  3 i2c_isa,nvidia,i2c_nforce2
ohci_hcd               20484  0 
firmware_class          9216  1 rt61
serio_raw               7300  0 
ehci_hcd               33164  0 
usbcore               117296  4 usbhid,ohci_hcd,ehci_hcd
evdev                  10496  9 
tsdev                   8320  0 
lzf                     4736  0 
sata_nv                17284  3 
libata                100272  3 ata_generic,pata_amd,sata_nv
xfs                   505728  2 
scsi_wait_scan          3072  0 
sd_mod                 26880  4 
scsi_mod               91320  3 libata,scsi_wait_scan,sd_mod
----------------------------------------------------------------------------------------------
[root w carnage ~]#cat /etc/modprobe.conf 
options usbhid mousepoll=2
# Alias do karty sieciowej
alias eth1 forcedeth
alias wlan0 rt61
alias tap0 tun

# ALSA
alias snd-card-0 snd_hda_intel
alias sound-slot-0 snd_hda_intel
options snd_hda_intel model=targa-dig

#Karta Nvidia

# I2C module options
alias char-major-89 i2c-dev
------------------------------------------------------------------------------------------------
[root w carnage ~]
#cat /etc/sysconfig/geninitrd                                 
## Basic modules to be loaded
BASICMODULES="sata_nv"

## Modules that should be loaded before anything (i.e. jbd for ext3)
#PREMODS=""

## Should initrd be compressed?
COMPRESS=yes

## What filesystem to use (rom or ext2)?
# PLD Linux kernel has only romfs compiled in.
#INITRDFS=rom

## Use udev to create /dev?
#USE_UDEV=no

## Use suspend to disk?
USE_SUSPEND=no

# Do install software suspend2 modules?
USE_SUSPEND2=yes


Sorry że się rozwodzę ale mam nadzieję że pomogłem ;)

-- 
Pozdrawiam
Piotr Grymkowski