Karta pamieci SDHC w telefonie przez USB

Lukasz Glebicki lukaszgl w post.pl
Pon, 14 Gru 2009, 19:38:29 CET


Hej,

Próbuje zaprzyjaźnić telefon z systemem, ale temu drugiem idzie to topornie:
Wkładam mini-USB do telefonu w trybie data.

Logi kernelowe pokazują "Device not ready" co powoduje opóźnienia w 
zamontowaniu jako root. Na tym sprzęcie inne karty sa wykrywane przez KDE i 
można je w ludzki sposób zamountować i nie mam komunikatów o błedach.

Linux inhell 2.6.31.7-1 #1 SMP x86_64, plyta z chipsetem AMD: SB600.
Urzadzenie wpina sie w OHCI (USB 1.1) a chyba powinno w EHCI.

Poniżej logu udevd/kernel.

Udev monitor pokazuje:
 
KERNEL[1260815092.740005] add      /devices/pci0000:00/0000:00:13.1/usb3/3-2 
(usb)
UDEV  [1260815092.745062] add      /devices/pci0000:00/0000:00:13.1/usb3/3-2 
(usb)
KERNEL[1260815092.746935] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0 (usb)
UDEV  [1260815092.748114] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0 (usb)
KERNEL[1260815092.752035] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7 (scsi)
KERNEL[1260815092.752067] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/scsi_host/host7 
(scsi_host)
UDEV  [1260815092.752301] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7 (scsi)
UDEV  [1260815092.752319] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/scsi_host/host7 
(scsi_host)
KERNEL[1260815092.752452] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/usb_device/usbdev3.3 (usb_device)
UDEV  [1260815092.752827] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/usb_device/usbdev3.3 (usb_device)
KERNEL[1260815097.758279] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0 (scsi)
KERNEL[1260815097.758422] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 
(scsi)
KERNEL[1260815097.760924] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/scsi_disk/7:0:0:0 
(scsi_disk)
UDEV  [1260815097.760947] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0 (scsi)
KERNEL[1260815097.760962] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/scsi_device/7:0:0:0 
(scsi_device)
KERNEL[1260815097.760978] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/scsi_generic/sg3 
(scsi_generic)
KERNEL[1260815097.760994] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/bsg/7:0:0:0 
(bsg)
KERNEL[1260815097.797093] change   
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 
(scsi)
UDEV  [1260815097.804602] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 
(scsi)
UDEV  [1260815097.805820] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/bsg/7:0:0:0 
(bsg)
UDEV  [1260815097.806272] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/scsi_device/7:0:0:0 
(scsi_device)
UDEV  [1260815097.806364] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/scsi_disk/7:0:0:0 
(scsi_disk)
UDEV  [1260815097.807681] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/scsi_generic/sg3 
(scsi_generic)
UDEV  [1260815097.830522] change   
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 
(scsi)
KERNEL[1260815098.323124] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/block/sdc 
(block)
KERNEL[1260815098.323151] add      /devices/virtual/bdi/8:32 (bdi)
UDEV  [1260815098.323802] add      /devices/virtual/bdi/8:32 (bdi)
UDEV  [1260815167.046193] add      
/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0/block/sdc 
(block)

Log kernela:
Dec 14 19:24:52 inhell kernel: [12640.935850] usb 3-2: new full speed USB 
device using ohci_hcd and address 3
Dec 14 19:24:52 inhell kernel: [12641.097140] usb 3-2: New USB device found, 
idVendor=0421, idProduct=0041
Dec 14 19:24:52 inhell kernel: [12641.097145] usb 3-2: New USB device strings: 
Mfr=1, Product=2, SerialNumber=3
Dec 14 19:24:52 inhell kernel: [12641.097148] usb 3-2: Product: Nokia E51
Dec 14 19:24:52 inhell kernel: [12641.097150] usb 3-2: Manufacturer: Nokia
Dec 14 19:24:52 inhell kernel: [12641.097152] usb 3-2: SerialNumber: 
XXXXXXXXXXXXXX
Dec 14 19:24:52 inhell kernel: [12641.097305] usb 3-2: configuration #1 chosen 
from 1 choice
Dec 14 19:24:52 inhell kernel: [12641.109255] scsi7 : SCSI emulation for USB 
Mass Storage devices
Dec 14 19:24:52 inhell kernel: [12641.109703] usb-storage: device found at 3
Dec 14 19:24:52 inhell kernel: [12641.109707] usb-storage: waiting for device 
to settle before scanning
Dec 14 19:24:57 inhell kernel: [12646.109367] usb-storage: device scan 
complete
Dec 14 19:24:57 inhell kernel: [12646.115325] scsi 7:0:0:0: Direct-Access     
Nokia    E51              1.0  PQ: 0 ANSI: 0
Dec 14 19:24:57 inhell kernel: [12646.116454] sd 7:0:0:0: Attached scsi 
generic sg3 type 0
Dec 14 19:24:57 inhell kernel: [12646.144368] sd 7:0:0:0: [sdc] 8019968 512-
byte logical blocks: (4.10 GB/3.82 GiB)
Dec 14 19:24:57 inhell kernel: [12646.150319] sd 7:0:0:0: [sdc] Write Protect 
is off
Dec 14 19:24:57 inhell kernel: [12646.150325] sd 7:0:0:0: [sdc] Mode Sense: 03 
00 00 00
Dec 14 19:24:57 inhell kernel: [12646.150328] sd 7:0:0:0: [sdc] Assuming drive 
cache: write through
Dec 14 19:24:57 inhell kernel: [12646.174527] sd 7:0:0:0: [sdc] Assuming drive 
cache: write through
Dec 14 19:24:58 inhell kernel: [12646.174534]  sdc:
Dec 14 19:24:58 inhell kernel: [12646.701328] sd 7:0:0:0: [sdc] Assuming drive 
cache: write through
Dec 14 19:24:58 inhell kernel: [12646.701334] sd 7:0:0:0: [sdc] Attached SCSI 
removable disk
Dec 14 19:25:03 inhell kernel: [12651.689496] sd 7:0:0:0: [sdc] Device not 
ready
Dec 14 19:25:03 inhell kernel: [12651.689501] sd 7:0:0:0: [sdc] Result: 
hostbyte=0x00 driverbyte=0x08
Dec 14 19:25:03 inhell kernel: [12651.689504] sd 7:0:0:0: [sdc] Sense Key : 
0x2 [current]
Dec 14 19:25:03 inhell kernel: [12651.689508] sd 7:0:0:0: [sdc] ASC=0x3a 
ASCQ=0x0
Dec 14 19:25:03 inhell kernel: [12651.689511] end_request: I/O error, dev sdc, 
sector 8019840
Dec 14 19:25:03 inhell kernel: [12651.689516] Buffer I/O error on device sdc, 
logical block 1002480
Dec 14 19:25:09 inhell kernel: [12657.923697] sd 7:0:0:0: [sdc] Device not 
ready
Dec 14 19:25:09 inhell kernel: [12657.923702] sd 7:0:0:0: [sdc] Result: 
hostbyte=0x00 driverbyte=0x08
Dec 14 19:25:09 inhell kernel: [12657.923705] sd 7:0:0:0: [sdc] Sense Key : 
0x2 [current]
Dec 14 19:25:09 inhell kernel: [12657.923709] sd 7:0:0:0: [sdc] ASC=0x3a 
ASCQ=0x0

pozdrawiam
-- 
Łukasz Głębicki  mail/rot13:yhxnfmty w cbfg.cy  PLD/Linux Team
gg:246267    Linux Registered User #318551   blekot:{irc,skype}


Więcej informacji o liście dyskusyjnej pld-users-pl