[packages/kernel] up to 6.8.5
atler
atler at pld-linux.org
Wed Apr 10 22:20:47 CEST 2024
commit 13e71d090312fedf433bfbf73e00fda7c9f86998
Author: Jan Palus <atler at pld-linux.org>
Date: Wed Apr 10 22:13:52 2024 +0200
up to 6.8.5
kernel-multiarch.config | 7 +-
kernel-pinebook-pro.patch | 403 +++++++++++++++++++---------------------------
kernel.spec | 4 +-
3 files changed, 174 insertions(+), 240 deletions(-)
---
diff --git a/kernel.spec b/kernel.spec
index f1edc11f..8d78b339 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -53,7 +53,7 @@
%define rel 1
%define basever 6.8
-%define postver .4
+%define postver .5
# define this to '-%{basever}' for longterm branch
%define versuffix %{nil}
@@ -107,7 +107,7 @@ Source0: https://www.kernel.org/pub/linux/kernel/v6.x/linux-%{basever}.tar.xz
# Source0-md5: 72d623b959a11850b57406f0b9fe3946
%if "%{postver}" != ".0"
Patch0: https://www.kernel.org/pub/linux/kernel/v6.x/patch-%{version}.xz
-# Patch0-md5: a864e2fb1d87188d627c7b6940a456bd
+# Patch0-md5: 1ba08c9c17769a8c4321ed76679cf298
%endif
Source1: kernel.sysconfig
diff --git a/kernel-multiarch.config b/kernel-multiarch.config
index c9c36ad2..8fd1ef2c 100644
--- a/kernel-multiarch.config
+++ b/kernel-multiarch.config
@@ -15629,6 +15629,9 @@ SND_SOC_MIKROE_PROTO arm=m arm64=m
#-
SND_BCM2835_SOC_I2S arm=m arm64=m
SND_BCM63XX_I2S_WHISTLER all=m
+SND_BCM2708_SOC_HIFIBERRY_DAC arm=m arm64=m
+SND_RPI_SIMPLE_SOUNDCARD arm=m arm64=m
+SND_RPI_WM8804_SOUNDCARD arm=m arm64=m
#-
#- *** FILE: sound/soc/codecs/Kconfig ***
@@ -16218,6 +16221,7 @@ BACKLIGHT_CARILLO_RANCH i386=m x86_64=m
BCACHEFS_DEBUG_TRANSACTIONS all=n
BPFILTER all=y
BPFILTER_UMH all=m
+BT_HS all=y
CRYPTO_CFB all=m
CRYPTO_OFB all=m
DEBUG_SLAB all=n
@@ -16253,9 +16257,6 @@ PCMCIA_SPECTRUM all=m
PCMCIA_WL3501 all=m
PLX_HERMES all=m
SLAB_DEPRECATED all=n
-SND_BCM2708_SOC_HIFIBERRY_DAC arm=m arm64=m
-SND_RPI_SIMPLE_SOUNDCARD arm=m arm64=m
-SND_RPI_WM8804_SOUNDCARD arm=m arm64=m
TMD_HERMES all=m
USB_NET_RNDIS_WLAN all=m
USB_ZD1201 all=m
diff --git a/kernel-pinebook-pro.patch b/kernel-pinebook-pro.patch
index d92d5ab7..b671e330 100644
--- a/kernel-pinebook-pro.patch
+++ b/kernel-pinebook-pro.patch
@@ -1,66 +1,25 @@
-From 8149051c34bc3d4c55adc56d04ffb7f7a04c2fd9 Mon Sep 17 00:00:00 2001
-From: Dan Johansen <strit at manjaro.org>
-Date: Sun, 2 Jan 2022 16:45:28 +0100
-Subject: [PATCH 1/2] Add megis extcon changes to fusb302
+From ecf210d50915efb265d93f8b84cfd53a492ffefc Mon Sep 17 00:00:00 2001
+From: Ondřej Jirman
+Date: Sun, 7 Nov 2021 19:24:40 +0100
+Subject: usb: typec: typec-extcon: Add typec -> extcon bridge driver
-Signed-off-by: Dan Johansen <strit at manjaro.org>
+This bridge connects standard Type C port interfaces for controling
+muxes, switches and usb roles to muxes, switches and usb role
+drivers controlled via extcon interface.
+
+Signed-off-by: Ondrej Jirman <megi at xff.cz>
---
- drivers/phy/rockchip/phy-rockchip-typec.c | 5 +++
- drivers/usb/typec/Kconfig | 7 ++++
- drivers/usb/typec/Makefile | 1 +
- drivers/usb/typec/tcpm/fusb302.c | 47 ++++++++++++++++-------
- drivers/usb/typec/tcpm/fusb302_reg.h | 16 ++++----
- 5 files changed, 53 insertions(+), 23 deletions(-)
+ drivers/usb/typec/Kconfig | 7 +
+ drivers/usb/typec/Makefile | 1 +
+ drivers/usb/typec/typec-extcon.c | 332 +++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 340 insertions(+)
+ create mode 100644 drivers/usb/typec/typec-extcon.c
-diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
-index d2bbdc96a167..fa10ee9a5794 100644
---- a/drivers/phy/rockchip/phy-rockchip-typec.c
-+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
-@@ -350,6 +350,7 @@ struct usb3phy_reg {
- * struct rockchip_usb3phy_port_cfg - usb3-phy port configuration.
- * @reg: the base address for usb3-phy config.
- * @typec_conn_dir: the register of type-c connector direction.
-+ * @typec_conn_dir_sel: the register of type-c connector direction source.
- * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
- * @external_psm: the register of type-c phy external psm clock.
- * @pipe_status: the register of type-c phy pipe status.
-@@ -360,6 +361,7 @@ struct usb3phy_reg {
- struct rockchip_usb3phy_port_cfg {
- unsigned int reg;
- struct usb3phy_reg typec_conn_dir;
-+ struct usb3phy_reg typec_conn_dir_sel;
- struct usb3phy_reg usb3tousb2_en;
- struct usb3phy_reg external_psm;
- struct usb3phy_reg pipe_status;
-@@ -434,6 +436,7 @@ static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = {
- {
- .reg = 0xff7c0000,
- .typec_conn_dir = { 0xe580, 0, 16 },
-+ .typec_conn_dir_sel = { 0xe580, 8, 16+8 },
- .usb3tousb2_en = { 0xe580, 3, 19 },
- .external_psm = { 0xe588, 14, 30 },
- .pipe_status = { 0xe5c0, 0, 0 },
-@@ -444,6 +447,7 @@ static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = {
- {
- .reg = 0xff800000,
- .typec_conn_dir = { 0xe58c, 0, 16 },
-+ .typec_conn_dir_sel = { 0xe58c, 8, 16+8 },
- .usb3tousb2_en = { 0xe58c, 3, 19 },
- .external_psm = { 0xe594, 14, 30 },
- .pipe_status = { 0xe5c0, 16, 16 },
-@@ -739,6 +743,7 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
-
- reset_control_deassert(tcphy->tcphy_rst);
-
-+ property_enable(tcphy, &cfg->typec_conn_dir_sel, 0);
- property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
- tcphy_dp_aux_set_flip(tcphy);
-
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
-index ab480f38523a..01ecc5e590f1 100644
+index 2f80c2792dbd..40a2934691d6 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
-@@ -88,6 +88,13 @@ config TYPEC_QCOM_PMIC
+@@ -110,6 +110,13 @@ config TYPEC_WUSB3801
If you choose to build this driver as a dynamically linked module, the
module will be called wusb3801.ko.
@@ -75,164 +34,21 @@ index ab480f38523a..01ecc5e590f1 100644
source "drivers/usb/typec/altmodes/Kconfig"
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
-index a0adb8947a30..d9d829386b73 100644
+index 7a368fea61bc..fe4bf3b8ff60 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
-@@ -8,4 +8,5 @@ obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
+@@ -11,4 +11,5 @@ obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
obj-$(CONFIG_TYPEC_RT1719) += rt1719.o
obj-$(CONFIG_TYPEC_WUSB3801) += wusb3801.o
+obj-$(CONFIG_TYPEC_EXTCON) += typec-extcon.o
obj-$(CONFIG_TYPEC) += mux/
-diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
-index 72f9001b0792..cb26793f90f8 100644
---- a/drivers/usb/typec/tcpm/fusb302.c
-+++ b/drivers/usb/typec/tcpm/fusb302.c
-@@ -440,6 +440,16 @@ static int tcpm_get_current_limit(struct tcpc_dev *dev)
- int current_limit = 0;
- unsigned long timeout;
-
-+ /*
-+ * To avoid cycles in OF dependencies, we get extcon when necessary
-+ * outside of probe function.
-+ */
-+ if (of_property_read_bool(chip->dev->of_node, "extcon") && !chip->extcon) {
-+ chip->extcon = extcon_get_edev_by_phandle(chip->dev, 0);
-+ if (IS_ERR(chip->extcon))
-+ chip->extcon = NULL;
-+ }
-+
- if (!chip->extcon)
- return 0;
-
-@@ -498,6 +508,7 @@ static int fusb302_set_toggling(struct fusb302_chip *chip,
- enum toggling_mode mode)
- {
- int ret = 0;
-+ u8 reg;
-
- /* first disable toggling */
- ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2,
-@@ -556,6 +567,12 @@ static int fusb302_set_toggling(struct fusb302_chip *chip,
- } else {
- /* Datasheet says vconn MUST be off when toggling */
- WARN(chip->vconn_on, "Vconn is on during toggle start");
-+
-+ /* clear interrupts */
-+ ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, ®);
-+ if (ret < 0)
-+ return ret;
-+
- /* unmask TOGDONE interrupt */
- ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA,
- FUSB_REG_MASKA_TOGDONE);
-@@ -635,6 +652,14 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
- goto done;
- }
-
-+ /* adjust current for SRC */
-+ ret = fusb302_set_src_current(chip, cc_src_current[cc]);
-+ if (ret < 0) {
-+ fusb302_log(chip, "cannot set src current %s, ret=%d",
-+ typec_cc_status_name[cc], ret);
-+ goto done;
-+ }
-+
- ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
- switches0_mask, switches0_data);
- if (ret < 0) {
-@@ -645,14 +670,6 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
- chip->cc1 = TYPEC_CC_OPEN;
- chip->cc2 = TYPEC_CC_OPEN;
-
-- /* adjust current for SRC */
-- ret = fusb302_set_src_current(chip, cc_src_current[cc]);
-- if (ret < 0) {
-- fusb302_log(chip, "cannot set src current %s, ret=%d",
-- typec_cc_status_name[cc], ret);
-- goto done;
-- }
--
- /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
- switch (cc) {
- case TYPEC_CC_RP_DEF:
-@@ -1528,14 +1545,16 @@ static void fusb302_irq_work(struct work_struct *work)
- "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x",
- interrupt, interrupta, interruptb, status0);
-
-- if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) {
-- vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
-+ vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
-+ if (interrupt & FUSB_REG_INTERRUPT_VBUSOK)
- fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s",
- vbus_present ? "On" : "Off");
-- if (vbus_present != chip->vbus_present) {
-- chip->vbus_present = vbus_present;
-- tcpm_vbus_change(chip->tcpm_port);
-- }
-+ if (vbus_present != chip->vbus_present) {
-+ chip->vbus_present = vbus_present;
-+ if (!(interrupt & FUSB_REG_INTERRUPT_VBUSOK))
-+ fusb302_log(chip, "IRQ: VBUS changed without interrupt, vbus=%s",
-+ vbus_present ? "On" : "Off");
-+ tcpm_vbus_change(chip->tcpm_port);
- }
-
- if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) {
-diff --git a/drivers/usb/typec/tcpm/fusb302_reg.h b/drivers/usb/typec/tcpm/fusb302_reg.h
-index edc0e4b0f1e6..f37d226c5027 100644
---- a/drivers/usb/typec/tcpm/fusb302_reg.h
-+++ b/drivers/usb/typec/tcpm/fusb302_reg.h
-@@ -27,14 +27,13 @@
- #define FUSB_REG_SWITCHES1_TXCC2_EN BIT(1)
- #define FUSB_REG_SWITCHES1_TXCC1_EN BIT(0)
- #define FUSB_REG_MEASURE 0x04
--#define FUSB_REG_MEASURE_MDAC5 BIT(7)
--#define FUSB_REG_MEASURE_MDAC4 BIT(6)
--#define FUSB_REG_MEASURE_MDAC3 BIT(5)
--#define FUSB_REG_MEASURE_MDAC2 BIT(4)
--#define FUSB_REG_MEASURE_MDAC1 BIT(3)
--#define FUSB_REG_MEASURE_MDAC0 BIT(2)
--#define FUSB_REG_MEASURE_VBUS BIT(1)
--#define FUSB_REG_MEASURE_XXXX5 BIT(0)
-+#define FUSB_REG_MEASURE_VBUS BIT(6)
-+#define FUSB_REG_MEASURE_MDAC5 BIT(5)
-+#define FUSB_REG_MEASURE_MDAC4 BIT(4)
-+#define FUSB_REG_MEASURE_MDAC3 BIT(3)
-+#define FUSB_REG_MEASURE_MDAC2 BIT(2)
-+#define FUSB_REG_MEASURE_MDAC1 BIT(1)
-+#define FUSB_REG_MEASURE_MDAC0 BIT(0)
- #define FUSB_REG_CONTROL0 0x06
- #define FUSB_REG_CONTROL0_TX_FLUSH BIT(6)
- #define FUSB_REG_CONTROL0_INT_MASK BIT(5)
-@@ -105,7 +104,6 @@
- #define FUSB_REG_STATUS0A_RX_SOFT_RESET BIT(1)
- #define FUSB_REG_STATUS0A_RX_HARD_RESET BIT(0)
- #define FUSB_REG_STATUS1A 0x3D
--#define FUSB_REG_STATUS1A_TOGSS BIT(3)
- #define FUSB_REG_STATUS1A_TOGSS_RUNNING 0x0
- #define FUSB_REG_STATUS1A_TOGSS_SRC1 0x1
- #define FUSB_REG_STATUS1A_TOGSS_SRC2 0x2
---
-2.34.1
-
-From 6af2e6a2d59bd755234e5e15a47dfa669788143c Mon Sep 17 00:00:00 2001
-From: Dan Johansen <strit at manjaro.org>
-Date: Sun, 2 Jan 2022 16:47:40 +0100
-Subject: [PATCH 2/2] usb: typec: Add megis typex to extcon bridge driver
-
-Signed-off-by: Dan Johansen <strit at manjaro.org>
----
- drivers/usb/typec/typec-extcon.c | 337 +++++++++++++++++++++++++++++++
- 1 file changed, 337 insertions(+)
- create mode 100644 drivers/usb/typec/typec-extcon.c
-
diff --git a/drivers/usb/typec/typec-extcon.c b/drivers/usb/typec/typec-extcon.c
new file mode 100644
-index 000000000000..143ff2486f2f
+index 000000000000..e460f35c8390
--- /dev/null
+++ b/drivers/usb/typec/typec-extcon.c
-@@ -0,0 +1,337 @@
+@@ -0,0 +1,332 @@
+/*
+ * typec -> extcon bridge
+ * Copyright (c) 2021 Ondřej Jirman <megi at xff.cz>
@@ -331,11 +147,6 @@ index 000000000000..143ff2486f2f
+ typec_extcon_set_cable(tce, EXTCON_USB_HOST, false, prop_ss, prop_or);
+ typec_extcon_set_cable(tce, EXTCON_DISP_DP, false, prop_ss, prop_or);
+
-+ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_SDP, false);
-+ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_DCP, false);
-+ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_CDP, false);
-+ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_ACA, false);
-+
+ goto out_unlock;
+ }
+
@@ -568,56 +379,125 @@ index 000000000000..143ff2486f2f
+module_platform_driver(typec_extcon_driver);
+
+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ondrej Jirman <megous at megous.com>");
++MODULE_AUTHOR("Ondrej Jirman <megi at xff.cz>");
+MODULE_DESCRIPTION("typec -> extcon bridge driver");
--
-2.34.1
+cgit v1.2.3
+
+From 509e948e64f676d1347dbcbd077f1c4ce34f0f25 Mon Sep 17 00:00:00 2001
+From: Ondrej Jirman
+Date: Thu, 9 Feb 2023 20:33:50 +0100
+Subject: usb: typec: typec-extcon: Allow to force reset on each mux change
-From 4c839ce95766910235ff558b2959589c9068917c Mon Sep 17 00:00:00 2001
-From: Dan Johansen <strit at manjaro.org>
-Date: Sun, 2 Jan 2022 19:15:39 +0100
-Subject: [PATCH] arm64: dts: rockchip: add typec extcon hack
+This may help with some Alt-DP USB adapters.
-Signed-off-by: Dan Johansen <strit at manjaro.org>
+Signed-off-by: Ondrej Jirman <megi at xff.cz>
---
- .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 31 +++++++++++++++++--
- 1 file changed, 29 insertions(+), 2 deletions(-)
+ drivers/usb/typec/typec-extcon.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+diff --git a/drivers/usb/typec/typec-extcon.c b/drivers/usb/typec/typec-extcon.c
+index 12be8f203f76..d5a7f40f0921 100644
+--- a/drivers/usb/typec/typec-extcon.c
++++ b/drivers/usb/typec/typec-extcon.c
+@@ -19,6 +19,10 @@
+ #include <linux/usb/typec_mux.h>
+ #include <linux/extcon-provider.h>
+
++static bool reset_on_mux;
++module_param(reset_on_mux, bool, S_IRUGO | S_IWUSR);
++MODULE_PARM_DESC(reset_on_mux, "Set DP=0 on each type-c mux change");
++
+ struct typec_extcon {
+ struct device *dev;
+
+@@ -162,6 +166,17 @@ static int typec_extcon_mux_set(struct typec_mux_dev *mux,
+ dev_dbg(tce->dev, " ...alt: svid=%04hx mode=%d vdo=%08x active=%u\n",
+ alt->svid, alt->mode, alt->vdo, alt->active);
+
++ mutex_lock(&tce->lock);
++ if (reset_on_mux && alt != NULL && tce->has_alt) {
++ tce->mode = state->mode;
++ tce->has_alt = false;
++ mutex_unlock(&tce->lock);
++
++ typec_extcon_sync_extcon(tce);
++ } else {
++ mutex_unlock(&tce->lock);
++ }
++
+ mutex_lock(&tce->lock);
+ tce->mode = state->mode;
+ tce->has_alt = alt != NULL;
+--
+cgit v1.2.3
+
+From c132654f50ab4726cdf0e116236c33c6038da08a Mon Sep 17 00:00:00 2001
+From: Ondřej Jirman
+Date: Wed, 2 Dec 2020 12:09:45 +0100
+Subject: arm64: dts: rk3399-pinebook-pro: Improve Type-C support on Pinebook
+ Pro
+
+This is using the same extcon bridge developed by me for Pinephone Pro.
+
+Signed-off-by: Ondrej Jirman <megi at xff.cz>
+---
+ .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 57 +++++++++++++++++++---
+ 1 file changed, 50 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
-index c2f021a1a18f..fc33e111bbee 100644
+index 15e90f836745..0d0310c4a82f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
-@@ -384,6 +384,20 @@ mains_charger: dc-charger {
+@@ -335,7 +335,7 @@
+
+ /* Regulators supplied by vcc5v0_usb */
+ /* Type C port power supply regulator */
+- vbus_5vout: vbus_typec: vbus-5vout {
++ vbus_5vout: vbus-5vout {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+@@ -374,6 +374,14 @@
pinctrl-names = "default";
pinctrl-0 = <&dc_det_pin>;
};
-+
-+ typec_extcon_bridge: typec-extcon {
++
++ typec_extcon_bridge: typec-extcon {
+ compatible = "linux,typec-extcon-bridge";
+ usb-role-switch;
+ orientation-switch;
+ mode-switch;
+ svid = /bits/ 16 <0xff01>;
+ };
-+};
-+
+ };
+
+ &cpu_b0 {
+@@ -400,6 +408,12 @@
+ cpu-supply = <&vdd_cpu_l>;
+ };
+
+&cdn_dp {
+ status = "okay";
+ extcon = <&typec_extcon_bridge>;
+ phys = <&tcphy0_dp>;
- };
-
- &cpu_b0 {
-@@ -705,6 +719,8 @@ fusb0: fusb30x at 22 {
++};
++
+ &edp {
+ force-hpd;
+ pinctrl-names = "default";
+@@ -691,7 +705,9 @@
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fusb0_int_pin>;
- vbus-supply = <&vbus_typec>;
-+ extcon = <&typec_extcon_bridge>;
+- vbus-supply = <&vbus_typec>;
++ vbus-supply = <&vbus_5vout>;
+ usb-role-switch = <&typec_extcon_bridge>;
++ extcon = <&typec_extcon_bridge>;
connector {
compatible = "usb-c-connector";
-@@ -713,10 +729,20 @@ connector {
+@@ -700,10 +716,19 @@
op-sink-microwatt = <1000000>;
power-role = "dual";
sink-pdos =
@@ -627,20 +507,19 @@ index c2f021a1a18f..fc33e111bbee 100644
- <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM | PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
try-power-role = "sink";
-+
+ mode-switch = <&typec_extcon_bridge>;
+ orientation-switch = <&typec_extcon_bridge>;
+
+ altmodes {
+ dp {
+ svid = <0xff01>;
-+ vdo = <0x0c0006>;
++ vdo = <0x0c46>;
+ };
+ };
ports {
#address-cells = <1>;
-@@ -984,6 +1010,7 @@ spiflash: flash at 0 {
+@@ -971,6 +996,7 @@
};
&tcphy0 {
@@ -648,6 +527,60 @@ index c2f021a1a18f..fc33e111bbee 100644
status = "okay";
};
+@@ -1004,13 +1030,21 @@
+
+ &u2phy0 {
+ status = "okay";
++ extcon = <&typec_extcon_bridge>;
++ extcon,ignore-usb;
+
+ u2phy0_otg: otg-port {
++ /*
++ * Type-C port on the left side of the chasis.
++ */
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+- phy-supply = <&vcc5v0_otg>;
++ /*
++ * USB 2.0 host port for the keyboard (internally connected).
++ */
++ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+ };
+
+@@ -1025,11 +1059,18 @@
+ status = "okay";
+
+ u2phy1_otg: otg-port {
++ /*
++ * USB 3.0 A port on the left side of the chasis.
++ */
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+- phy-supply = <&vcc5v0_otg>;
++ /*
++ * To the HUB that has USB camera and USB 2.0 port on the right
++ * side of the chasis.
++ */
++ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+ };
+ };
+@@ -1080,7 +1121,9 @@
+ };
+
+ &usbdrd_dwc3_0 {
+- dr_mode = "host";
++ dr_mode = "otg";
++ extcon = <&typec_extcon_bridge>;
++ snps,usb3-phy-reset-quirk;
+ status = "okay";
+ };
+
--
-2.34.1
+cgit v1.2.3
================================================================
---- gitweb:
http://git.pld-linux.org/gitweb.cgi/packages/kernel.git/commitdiff/13e71d090312fedf433bfbf73e00fda7c9f86998
More information about the pld-cvs-commit
mailing list