[packages/kernel] revert unintended changes
atler
atler at pld-linux.org
Wed Apr 10 22:59:33 CEST 2024
commit af03d05cd7f7ece2aec3c139069a66180e8488fc
Author: Jan Palus <atler at pld-linux.org>
Date: Wed Apr 10 22:55:59 2024 +0200
revert unintended changes
kernel-multiarch.config | 7 +-
kernel-pinebook-pro.patch | 403 +++++++++++++++++++++++++++-------------------
2 files changed, 238 insertions(+), 172 deletions(-)
---
diff --git a/kernel-multiarch.config b/kernel-multiarch.config
index 8fd1ef2c..c9c36ad2 100644
--- a/kernel-multiarch.config
+++ b/kernel-multiarch.config
@@ -15629,9 +15629,6 @@ SND_SOC_MIKROE_PROTO arm=m arm64=m
#-
SND_BCM2835_SOC_I2S arm=m arm64=m
SND_BCM63XX_I2S_WHISTLER all=m
-SND_BCM2708_SOC_HIFIBERRY_DAC arm=m arm64=m
-SND_RPI_SIMPLE_SOUNDCARD arm=m arm64=m
-SND_RPI_WM8804_SOUNDCARD arm=m arm64=m
#-
#- *** FILE: sound/soc/codecs/Kconfig ***
@@ -16221,7 +16218,6 @@ BACKLIGHT_CARILLO_RANCH i386=m x86_64=m
BCACHEFS_DEBUG_TRANSACTIONS all=n
BPFILTER all=y
BPFILTER_UMH all=m
-BT_HS all=y
CRYPTO_CFB all=m
CRYPTO_OFB all=m
DEBUG_SLAB all=n
@@ -16257,6 +16253,9 @@ PCMCIA_SPECTRUM all=m
PCMCIA_WL3501 all=m
PLX_HERMES all=m
SLAB_DEPRECATED all=n
+SND_BCM2708_SOC_HIFIBERRY_DAC arm=m arm64=m
+SND_RPI_SIMPLE_SOUNDCARD arm=m arm64=m
+SND_RPI_WM8804_SOUNDCARD arm=m arm64=m
TMD_HERMES all=m
USB_NET_RNDIS_WLAN all=m
USB_ZD1201 all=m
diff --git a/kernel-pinebook-pro.patch b/kernel-pinebook-pro.patch
index b671e330..d92d5ab7 100644
--- a/kernel-pinebook-pro.patch
+++ b/kernel-pinebook-pro.patch
@@ -1,25 +1,66 @@
-From ecf210d50915efb265d93f8b84cfd53a492ffefc Mon Sep 17 00:00:00 2001
-From: Ondřej Jirman
-Date: Sun, 7 Nov 2021 19:24:40 +0100
-Subject: usb: typec: typec-extcon: Add typec -> extcon bridge driver
+From 8149051c34bc3d4c55adc56d04ffb7f7a04c2fd9 Mon Sep 17 00:00:00 2001
+From: Dan Johansen <strit at manjaro.org>
+Date: Sun, 2 Jan 2022 16:45:28 +0100
+Subject: [PATCH 1/2] Add megis extcon changes to fusb302
-This bridge connects standard Type C port interfaces for controling
-muxes, switches and usb roles to muxes, switches and usb role
-drivers controlled via extcon interface.
-
-Signed-off-by: Ondrej Jirman <megi at xff.cz>
+Signed-off-by: Dan Johansen <strit at manjaro.org>
---
- drivers/usb/typec/Kconfig | 7 +
- drivers/usb/typec/Makefile | 1 +
- drivers/usb/typec/typec-extcon.c | 332 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 340 insertions(+)
- create mode 100644 drivers/usb/typec/typec-extcon.c
+ drivers/phy/rockchip/phy-rockchip-typec.c | 5 +++
+ drivers/usb/typec/Kconfig | 7 ++++
+ drivers/usb/typec/Makefile | 1 +
+ drivers/usb/typec/tcpm/fusb302.c | 47 ++++++++++++++++-------
+ drivers/usb/typec/tcpm/fusb302_reg.h | 16 ++++----
+ 5 files changed, 53 insertions(+), 23 deletions(-)
+diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
+index d2bbdc96a167..fa10ee9a5794 100644
+--- a/drivers/phy/rockchip/phy-rockchip-typec.c
++++ b/drivers/phy/rockchip/phy-rockchip-typec.c
+@@ -350,6 +350,7 @@ struct usb3phy_reg {
+ * struct rockchip_usb3phy_port_cfg - usb3-phy port configuration.
+ * @reg: the base address for usb3-phy config.
+ * @typec_conn_dir: the register of type-c connector direction.
++ * @typec_conn_dir_sel: the register of type-c connector direction source.
+ * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
+ * @external_psm: the register of type-c phy external psm clock.
+ * @pipe_status: the register of type-c phy pipe status.
+@@ -360,6 +361,7 @@ struct usb3phy_reg {
+ struct rockchip_usb3phy_port_cfg {
+ unsigned int reg;
+ struct usb3phy_reg typec_conn_dir;
++ struct usb3phy_reg typec_conn_dir_sel;
+ struct usb3phy_reg usb3tousb2_en;
+ struct usb3phy_reg external_psm;
+ struct usb3phy_reg pipe_status;
+@@ -434,6 +436,7 @@ static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = {
+ {
+ .reg = 0xff7c0000,
+ .typec_conn_dir = { 0xe580, 0, 16 },
++ .typec_conn_dir_sel = { 0xe580, 8, 16+8 },
+ .usb3tousb2_en = { 0xe580, 3, 19 },
+ .external_psm = { 0xe588, 14, 30 },
+ .pipe_status = { 0xe5c0, 0, 0 },
+@@ -444,6 +447,7 @@ static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = {
+ {
+ .reg = 0xff800000,
+ .typec_conn_dir = { 0xe58c, 0, 16 },
++ .typec_conn_dir_sel = { 0xe58c, 8, 16+8 },
+ .usb3tousb2_en = { 0xe58c, 3, 19 },
+ .external_psm = { 0xe594, 14, 30 },
+ .pipe_status = { 0xe5c0, 16, 16 },
+@@ -739,6 +743,7 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
+
+ reset_control_deassert(tcphy->tcphy_rst);
+
++ property_enable(tcphy, &cfg->typec_conn_dir_sel, 0);
+ property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+ tcphy_dp_aux_set_flip(tcphy);
+
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
-index 2f80c2792dbd..40a2934691d6 100644
+index ab480f38523a..01ecc5e590f1 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
-@@ -110,6 +110,13 @@ config TYPEC_WUSB3801
+@@ -88,6 +88,13 @@ config TYPEC_QCOM_PMIC
If you choose to build this driver as a dynamically linked module, the
module will be called wusb3801.ko.
@@ -34,21 +75,164 @@ index 2f80c2792dbd..40a2934691d6 100644
source "drivers/usb/typec/altmodes/Kconfig"
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
-index 7a368fea61bc..fe4bf3b8ff60 100644
+index a0adb8947a30..d9d829386b73 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
-@@ -11,4 +11,5 @@ obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
+@@ -8,4 +8,5 @@ obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
obj-$(CONFIG_TYPEC_RT1719) += rt1719.o
obj-$(CONFIG_TYPEC_WUSB3801) += wusb3801.o
+obj-$(CONFIG_TYPEC_EXTCON) += typec-extcon.o
obj-$(CONFIG_TYPEC) += mux/
+diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
+index 72f9001b0792..cb26793f90f8 100644
+--- a/drivers/usb/typec/tcpm/fusb302.c
++++ b/drivers/usb/typec/tcpm/fusb302.c
+@@ -440,6 +440,16 @@ static int tcpm_get_current_limit(struct tcpc_dev *dev)
+ int current_limit = 0;
+ unsigned long timeout;
+
++ /*
++ * To avoid cycles in OF dependencies, we get extcon when necessary
++ * outside of probe function.
++ */
++ if (of_property_read_bool(chip->dev->of_node, "extcon") && !chip->extcon) {
++ chip->extcon = extcon_get_edev_by_phandle(chip->dev, 0);
++ if (IS_ERR(chip->extcon))
++ chip->extcon = NULL;
++ }
++
+ if (!chip->extcon)
+ return 0;
+
+@@ -498,6 +508,7 @@ static int fusb302_set_toggling(struct fusb302_chip *chip,
+ enum toggling_mode mode)
+ {
+ int ret = 0;
++ u8 reg;
+
+ /* first disable toggling */
+ ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2,
+@@ -556,6 +567,12 @@ static int fusb302_set_toggling(struct fusb302_chip *chip,
+ } else {
+ /* Datasheet says vconn MUST be off when toggling */
+ WARN(chip->vconn_on, "Vconn is on during toggle start");
++
++ /* clear interrupts */
++ ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, ®);
++ if (ret < 0)
++ return ret;
++
+ /* unmask TOGDONE interrupt */
+ ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA,
+ FUSB_REG_MASKA_TOGDONE);
+@@ -635,6 +652,14 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
+ goto done;
+ }
+
++ /* adjust current for SRC */
++ ret = fusb302_set_src_current(chip, cc_src_current[cc]);
++ if (ret < 0) {
++ fusb302_log(chip, "cannot set src current %s, ret=%d",
++ typec_cc_status_name[cc], ret);
++ goto done;
++ }
++
+ ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
+ switches0_mask, switches0_data);
+ if (ret < 0) {
+@@ -645,14 +670,6 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
+ chip->cc1 = TYPEC_CC_OPEN;
+ chip->cc2 = TYPEC_CC_OPEN;
+
+- /* adjust current for SRC */
+- ret = fusb302_set_src_current(chip, cc_src_current[cc]);
+- if (ret < 0) {
+- fusb302_log(chip, "cannot set src current %s, ret=%d",
+- typec_cc_status_name[cc], ret);
+- goto done;
+- }
+-
+ /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
+ switch (cc) {
+ case TYPEC_CC_RP_DEF:
+@@ -1528,14 +1545,16 @@ static void fusb302_irq_work(struct work_struct *work)
+ "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x",
+ interrupt, interrupta, interruptb, status0);
+
+- if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) {
+- vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
++ vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
++ if (interrupt & FUSB_REG_INTERRUPT_VBUSOK)
+ fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s",
+ vbus_present ? "On" : "Off");
+- if (vbus_present != chip->vbus_present) {
+- chip->vbus_present = vbus_present;
+- tcpm_vbus_change(chip->tcpm_port);
+- }
++ if (vbus_present != chip->vbus_present) {
++ chip->vbus_present = vbus_present;
++ if (!(interrupt & FUSB_REG_INTERRUPT_VBUSOK))
++ fusb302_log(chip, "IRQ: VBUS changed without interrupt, vbus=%s",
++ vbus_present ? "On" : "Off");
++ tcpm_vbus_change(chip->tcpm_port);
+ }
+
+ if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) {
+diff --git a/drivers/usb/typec/tcpm/fusb302_reg.h b/drivers/usb/typec/tcpm/fusb302_reg.h
+index edc0e4b0f1e6..f37d226c5027 100644
+--- a/drivers/usb/typec/tcpm/fusb302_reg.h
++++ b/drivers/usb/typec/tcpm/fusb302_reg.h
+@@ -27,14 +27,13 @@
+ #define FUSB_REG_SWITCHES1_TXCC2_EN BIT(1)
+ #define FUSB_REG_SWITCHES1_TXCC1_EN BIT(0)
+ #define FUSB_REG_MEASURE 0x04
+-#define FUSB_REG_MEASURE_MDAC5 BIT(7)
+-#define FUSB_REG_MEASURE_MDAC4 BIT(6)
+-#define FUSB_REG_MEASURE_MDAC3 BIT(5)
+-#define FUSB_REG_MEASURE_MDAC2 BIT(4)
+-#define FUSB_REG_MEASURE_MDAC1 BIT(3)
+-#define FUSB_REG_MEASURE_MDAC0 BIT(2)
+-#define FUSB_REG_MEASURE_VBUS BIT(1)
+-#define FUSB_REG_MEASURE_XXXX5 BIT(0)
++#define FUSB_REG_MEASURE_VBUS BIT(6)
++#define FUSB_REG_MEASURE_MDAC5 BIT(5)
++#define FUSB_REG_MEASURE_MDAC4 BIT(4)
++#define FUSB_REG_MEASURE_MDAC3 BIT(3)
++#define FUSB_REG_MEASURE_MDAC2 BIT(2)
++#define FUSB_REG_MEASURE_MDAC1 BIT(1)
++#define FUSB_REG_MEASURE_MDAC0 BIT(0)
+ #define FUSB_REG_CONTROL0 0x06
+ #define FUSB_REG_CONTROL0_TX_FLUSH BIT(6)
+ #define FUSB_REG_CONTROL0_INT_MASK BIT(5)
+@@ -105,7 +104,6 @@
+ #define FUSB_REG_STATUS0A_RX_SOFT_RESET BIT(1)
+ #define FUSB_REG_STATUS0A_RX_HARD_RESET BIT(0)
+ #define FUSB_REG_STATUS1A 0x3D
+-#define FUSB_REG_STATUS1A_TOGSS BIT(3)
+ #define FUSB_REG_STATUS1A_TOGSS_RUNNING 0x0
+ #define FUSB_REG_STATUS1A_TOGSS_SRC1 0x1
+ #define FUSB_REG_STATUS1A_TOGSS_SRC2 0x2
+--
+2.34.1
+
+From 6af2e6a2d59bd755234e5e15a47dfa669788143c Mon Sep 17 00:00:00 2001
+From: Dan Johansen <strit at manjaro.org>
+Date: Sun, 2 Jan 2022 16:47:40 +0100
+Subject: [PATCH 2/2] usb: typec: Add megis typex to extcon bridge driver
+
+Signed-off-by: Dan Johansen <strit at manjaro.org>
+---
+ drivers/usb/typec/typec-extcon.c | 337 +++++++++++++++++++++++++++++++
+ 1 file changed, 337 insertions(+)
+ create mode 100644 drivers/usb/typec/typec-extcon.c
+
diff --git a/drivers/usb/typec/typec-extcon.c b/drivers/usb/typec/typec-extcon.c
new file mode 100644
-index 000000000000..e460f35c8390
+index 000000000000..143ff2486f2f
--- /dev/null
+++ b/drivers/usb/typec/typec-extcon.c
-@@ -0,0 +1,332 @@
+@@ -0,0 +1,337 @@
+/*
+ * typec -> extcon bridge
+ * Copyright (c) 2021 Ondřej Jirman <megi at xff.cz>
@@ -147,6 +331,11 @@ index 000000000000..e460f35c8390
+ typec_extcon_set_cable(tce, EXTCON_USB_HOST, false, prop_ss, prop_or);
+ typec_extcon_set_cable(tce, EXTCON_DISP_DP, false, prop_ss, prop_or);
+
++ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_SDP, false);
++ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_DCP, false);
++ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_CDP, false);
++ extcon_set_state_sync(tce->extcon, EXTCON_CHG_USB_ACA, false);
++
+ goto out_unlock;
+ }
+
@@ -379,125 +568,56 @@ index 000000000000..e460f35c8390
+module_platform_driver(typec_extcon_driver);
+
+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ondrej Jirman <megi at xff.cz>");
++MODULE_AUTHOR("Ondrej Jirman <megous at megous.com>");
+MODULE_DESCRIPTION("typec -> extcon bridge driver");
--
-cgit v1.2.3
-
-From 509e948e64f676d1347dbcbd077f1c4ce34f0f25 Mon Sep 17 00:00:00 2001
-From: Ondrej Jirman
-Date: Thu, 9 Feb 2023 20:33:50 +0100
-Subject: usb: typec: typec-extcon: Allow to force reset on each mux change
+2.34.1
-This may help with some Alt-DP USB adapters.
+From 4c839ce95766910235ff558b2959589c9068917c Mon Sep 17 00:00:00 2001
+From: Dan Johansen <strit at manjaro.org>
+Date: Sun, 2 Jan 2022 19:15:39 +0100
+Subject: [PATCH] arm64: dts: rockchip: add typec extcon hack
-Signed-off-by: Ondrej Jirman <megi at xff.cz>
+Signed-off-by: Dan Johansen <strit at manjaro.org>
---
- drivers/usb/typec/typec-extcon.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
-diff --git a/drivers/usb/typec/typec-extcon.c b/drivers/usb/typec/typec-extcon.c
-index 12be8f203f76..d5a7f40f0921 100644
---- a/drivers/usb/typec/typec-extcon.c
-+++ b/drivers/usb/typec/typec-extcon.c
-@@ -19,6 +19,10 @@
- #include <linux/usb/typec_mux.h>
- #include <linux/extcon-provider.h>
-
-+static bool reset_on_mux;
-+module_param(reset_on_mux, bool, S_IRUGO | S_IWUSR);
-+MODULE_PARM_DESC(reset_on_mux, "Set DP=0 on each type-c mux change");
-+
- struct typec_extcon {
- struct device *dev;
-
-@@ -162,6 +166,17 @@ static int typec_extcon_mux_set(struct typec_mux_dev *mux,
- dev_dbg(tce->dev, " ...alt: svid=%04hx mode=%d vdo=%08x active=%u\n",
- alt->svid, alt->mode, alt->vdo, alt->active);
-
-+ mutex_lock(&tce->lock);
-+ if (reset_on_mux && alt != NULL && tce->has_alt) {
-+ tce->mode = state->mode;
-+ tce->has_alt = false;
-+ mutex_unlock(&tce->lock);
-+
-+ typec_extcon_sync_extcon(tce);
-+ } else {
-+ mutex_unlock(&tce->lock);
-+ }
-+
- mutex_lock(&tce->lock);
- tce->mode = state->mode;
- tce->has_alt = alt != NULL;
---
-cgit v1.2.3
-
-From c132654f50ab4726cdf0e116236c33c6038da08a Mon Sep 17 00:00:00 2001
-From: Ondřej Jirman
-Date: Wed, 2 Dec 2020 12:09:45 +0100
-Subject: arm64: dts: rk3399-pinebook-pro: Improve Type-C support on Pinebook
- Pro
-
-This is using the same extcon bridge developed by me for Pinephone Pro.
-
-Signed-off-by: Ondrej Jirman <megi at xff.cz>
----
- .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 57 +++++++++++++++++++---
- 1 file changed, 50 insertions(+), 7 deletions(-)
+ .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 31 +++++++++++++++++--
+ 1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
-index 15e90f836745..0d0310c4a82f 100644
+index c2f021a1a18f..fc33e111bbee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
-@@ -335,7 +335,7 @@
-
- /* Regulators supplied by vcc5v0_usb */
- /* Type C port power supply regulator */
-- vbus_5vout: vbus_typec: vbus-5vout {
-+ vbus_5vout: vbus-5vout {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-@@ -374,6 +374,14 @@
+@@ -384,6 +384,20 @@ mains_charger: dc-charger {
pinctrl-names = "default";
pinctrl-0 = <&dc_det_pin>;
};
-+
-+ typec_extcon_bridge: typec-extcon {
++
++ typec_extcon_bridge: typec-extcon {
+ compatible = "linux,typec-extcon-bridge";
+ usb-role-switch;
+ orientation-switch;
+ mode-switch;
+ svid = /bits/ 16 <0xff01>;
+ };
- };
-
- &cpu_b0 {
-@@ -400,6 +408,12 @@
- cpu-supply = <&vdd_cpu_l>;
- };
-
++};
++
+&cdn_dp {
+ status = "okay";
+ extcon = <&typec_extcon_bridge>;
+ phys = <&tcphy0_dp>;
-+};
-+
- &edp {
- force-hpd;
- pinctrl-names = "default";
-@@ -691,7 +705,9 @@
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ &cpu_b0 {
+@@ -705,6 +719,8 @@ fusb0: fusb30x at 22 {
pinctrl-names = "default";
pinctrl-0 = <&fusb0_int_pin>;
-- vbus-supply = <&vbus_typec>;
-+ vbus-supply = <&vbus_5vout>;
-+ usb-role-switch = <&typec_extcon_bridge>;
+ vbus-supply = <&vbus_typec>;
+ extcon = <&typec_extcon_bridge>;
++ usb-role-switch = <&typec_extcon_bridge>;
connector {
compatible = "usb-c-connector";
-@@ -700,10 +716,19 @@
+@@ -713,10 +729,20 @@ connector {
op-sink-microwatt = <1000000>;
power-role = "dual";
sink-pdos =
@@ -507,19 +627,20 @@ index 15e90f836745..0d0310c4a82f 100644
- <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM | PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
try-power-role = "sink";
++
+ mode-switch = <&typec_extcon_bridge>;
+ orientation-switch = <&typec_extcon_bridge>;
+
+ altmodes {
+ dp {
+ svid = <0xff01>;
-+ vdo = <0x0c46>;
++ vdo = <0x0c0006>;
+ };
+ };
ports {
#address-cells = <1>;
-@@ -971,6 +996,7 @@
+@@ -984,6 +1010,7 @@ spiflash: flash at 0 {
};
&tcphy0 {
@@ -527,60 +648,6 @@ index 15e90f836745..0d0310c4a82f 100644
status = "okay";
};
-@@ -1004,13 +1030,21 @@
-
- &u2phy0 {
- status = "okay";
-+ extcon = <&typec_extcon_bridge>;
-+ extcon,ignore-usb;
-
- u2phy0_otg: otg-port {
-+ /*
-+ * Type-C port on the left side of the chasis.
-+ */
- status = "okay";
- };
-
- u2phy0_host: host-port {
-- phy-supply = <&vcc5v0_otg>;
-+ /*
-+ * USB 2.0 host port for the keyboard (internally connected).
-+ */
-+ phy-supply = <&vcc5v0_usb>;
- status = "okay";
- };
-
-@@ -1025,11 +1059,18 @@
- status = "okay";
-
- u2phy1_otg: otg-port {
-+ /*
-+ * USB 3.0 A port on the left side of the chasis.
-+ */
- status = "okay";
- };
-
- u2phy1_host: host-port {
-- phy-supply = <&vcc5v0_otg>;
-+ /*
-+ * To the HUB that has USB camera and USB 2.0 port on the right
-+ * side of the chasis.
-+ */
-+ phy-supply = <&vcc5v0_usb>;
- status = "okay";
- };
- };
-@@ -1080,7 +1121,9 @@
- };
-
- &usbdrd_dwc3_0 {
-- dr_mode = "host";
-+ dr_mode = "otg";
-+ extcon = <&typec_extcon_bridge>;
-+ snps,usb3-phy-reset-quirk;
- status = "okay";
- };
-
--
-cgit v1.2.3
+2.34.1
================================================================
---- gitweb:
http://git.pld-linux.org/gitweb.cgi/packages/kernel.git/commitdiff/af03d05cd7f7ece2aec3c139069a66180e8488fc
More information about the pld-cvs-commit
mailing list