[Ac] eagle-usb.spec

[Bartosz Świątek]

2008/9/21 Sławomir Sędyka <kermit7768poland w gmail.com>:
> Próba zbudowania eagle-usb.spec z brancha Ac kończy się tak:
>
> configure: creating ./config.status
> config.status: creating Makefile.common
> config.status: WARNING:  Makefile.common.in seems to ignore the
> --datarootdir setting
> config.status: executing default commands
>
> ========================================================================
> distribution detected                           generic
>
> dhcp support                                    no
>
> pppd support                                    yes
>   pppoa support                                 yes
>   pppoe support                                 yes
>
> install eagleconnect (tcl/tk frontend)          no
>
> generate documentation                          yes
> ========================================================================
>
> error: kernel-sources cannot be found!
>
> warning: kernel-sources version is different from the current kernel.
>
> warning: a previous eagle-usb driver was found on your system.
>          You should run 'make uninstall' now.
>
> + /usr/bin/make -C driver/firmware CC=i686-pld-linux-gcc OPT=-O2 -march=i686
> make: Entering directory
> `/home/users/kermit/rpm/BUILD/eagle-usb-2.3.3/driver/firmware'
> i686-pld-linux-gcc -O2 -march=i686  -pipe -Wall -pedantic builddsp.c -o
> buildDSP
> ./buildDSP -d sagem/pots dsp_code_pots.bin
> Reading file sagem/pots/rtbldep0.bnm
> Reading file sagem/pots/rtbldep1.bnm
> Reading file sagem/pots/rtbldep2.bnm
> Reading file sagem/pots/rtbldep3.bnm
> Reading file sagem/pots/rtbldep4.bnm
> Writing file dsp_code_pots.bin
> ./buildDSP -d sagem/isdn dsp_code_isdn.bin
> Reading file sagem/isdn/rtbldei0.bnm
> Reading file sagem/isdn/rtbldei1.bnm
> Reading file sagem/isdn/rtbldei2.bnm
> Reading file sagem/isdn/rtbldei3.bnm
> Reading file sagem/isdn/rtbldei4.bnm
> Writing file dsp_code_isdn.bin
> make: Leaving directory
> `/home/users/kermit/rpm/BUILD/eagle-usb-2.3.3/driver/firmware'
> + /usr/bin/make -C driver/user CC=i686-pld-linux-gcc OPT=-O2 -march=i686
> make: Entering directory
> `/home/users/kermit/rpm/BUILD/eagle-usb-2.3.3/driver/user'
> i686-pld-linux-gcc -O2 -march=i686  -pipe -Wall -pedantic -DLINUX -g
> -DCONF_DIR="\"/etc/eagle-usb\"" -DBIN_DIR="\"/usr/share/misc\""
> '-DEAGLEUSBVERSION="2.3.3"' -DUSE_CMVS eaglectrl.c -o eaglectrl
> In file included from ../eagle-usb.h:30,
>                  from eaglectrl.c:40:
> ../eu_types.h:29:24: asm/bitops.h: Nie ma takiego pliku ani katalogu

Czego w tym meldunku nie rozumiesz? ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

> make: *** [eaglectrl] Error 1
> make: Leaving directory
> `/home/users/kermit/rpm/BUILD/eagle-usb-2.3.3/driver/user'
> błąd: Błędny status wyjścia z /home/users/kermit/tmp/rpm-tmp.63749 (%build)
>
>
> Błędy budowania RPM-a:
>     Błędny status wyjścia z /home/users/kermit/tmp/rpm-tmp.63749 (%build)
> Error: package build failed. (no more info)
>
> rpm -qa kernel\*
> kernel-usb-eagle-2.3.3-62.i686
> kernel-module-build-2.6.16.62-1.i686
> kernel-headers-2.6.16.62-1.i686
> kernel-source-2.6.16.62-1.i686
> kernel-2.6.16.60-11.i686
>
> Niech Ktoś[TM] na to spojrzy i poprawi. Z góry dzięki.

Prośby to się od "niech" nie zaczyna.

[...]