siec + pld ciag dalszy

[mcINEK]

Witam.

Moj poprzedni prolem z zagubionym przerwaniem rozwiazalem
instalujac Ra+2.4.19 Packa. Dzien podzialalo i znowu padlo.

Teraz w dmesgu dostaje:

ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 12 for device 00:09.0
divert: allocating divert_blk for eth0
^^^^^
Nie wiem co to oznacza, nigdy czegos takiego nie mialem.

eth0: RealTek RTL-8029 found at 0xdc00, IRQ 12, 00:C0:DF:E8:5E:68.
PCI: Found IRQ 11 for device 00:0b.0
PCI: Sharing IRQ 11 with 00:07.2
divert: allocating divert_blk for eth1
eth1: RealTek RTL-8029 found at 0xda00, IRQ 11, 00:50:BA:C7:1D:3F.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0

^^^^
Rowniez nie wiem skad to sie wzielo.

divert: not allocating divert_blk for non-ethernet device ppp0

Rezultat jest taki ze nie dziala siec. Podam jeszcze:

# ip link list
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: imq0: <NOARP> mtu 1500 qdisc noop qlen 30
    link/void
3: imq1: <NOARP> mtu 1500 qdisc noop qlen 30
    link/void
4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
    link/ether 00:c0:df:e8:5e:68 brd ff:ff:ff:ff:ff:ff
5: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 100
    link/ether 00:50:ba:c7:1d:3f brd ff:ff:ff:ff:ff:ff
6: sit0 w NONE: <NOARP> mtu 1480 qdisc noop
    link/sit 0.0.0.0 brd 0.0.0.0
7: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1656 qdisc pfifo_fast qlen 3
    link/ppp

Ma ktos jakis pomysl?

Pozdrawiam - mcINEK