siec + pld ciag dalszy

[mcINEK]

# ip a
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
2: imq0: <NOARP> mtu 1500 qdisc noop qlen 30
    link/void
3: imq1: <NOARP> mtu 1500 qdisc noop qlen 30
    link/void
4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
    link/ether 00:c0:df:e8:5e:68 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.1/24 brd 192.168.2.255 scope global eth0
    inet6 fe80::2c0:dfff:fee8:5e68/10 scope link
5: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 100
    link/ether 00:50:ba:c7:1d:3f brd ff:ff:ff:ff:ff:ff
6: sit0 w NONE: <NOARP> mtu 1480 qdisc noop
    link/sit 0.0.0.0 brd 0.0.0.0
7: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1656 qdisc pfifo_fast qlen 3
    link/ppp
    inet 213.25.54.125/32 scope global ppp0

# ip r
192.168.2.0/24 dev eth0  proto kernel  scope link  src 192.168.2.1
default via 213.25.54.125 dev ppp0  scope link

Dziala net (ppp0 - sdi) ale nie dzialaja nawet pingi do sieci lokalnej
(eth0 - 192.168.2.1)
(eth1 - 192.168.1.1). Wczoraj dzialalo a dzis nie, choc nic nie zmienialem.
(chyba ze ktos
inny ale watpie)

Pzdr - mciNEK