Problemy z wypalaniem na Ac
dzeus
dzeus w zatorze.slupsk.pl
Czw, 29 Kwi 2004, 16:08:22 CEST
Użytkownik Fryderyk Dziarmagowski napisał:
> On Thu, 29 Apr 2004 13:40:34 +0200
> Robert 'dzeus' Graużenis <dzeus w zatorze.slupsk.pl> wrote:
>
>
>>Zgłaszałem wcześniej temat problemów z wypalaniem płyt pod Ac jajko
>>2.6.x.
>
> [...]
>
>>Wypalam tak: cdrecord -v speed=8 dev=/dev/hdc jakis_plik
>
>
> a co się dzieje jak ustawisz dev=ATA:x,x,x (numer ATA dostaniesz
> cdrecord -scanbus dev=ATA) ?
Chyba ATAPI bo:
[root w backup dzeus]# cdrecord -scanbus dev=ATA
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg
Schilling
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
cdrecord: No such file or directory. Cannot open 'ATA'. Cannot open SCSI
driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
[root w backup dzeus]# cdrecord -scanbus dev=ATAPI
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg
Schilling
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) 'SAMSUNG ' 'CD-R/RW SW-252F ' 'R801' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
[root w backup dzeus]# cdrecord -v speed=8 blank=fast dev=ATAPI:0,1,0
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-252F '
Revision : 'R801'
Device seems to be: Generic mmc CD-RW.
Current: 0x0000
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1279488 = 1249 KB
cdrecord: No disk / Wrong disk!
Wogóle jak lecę po ATAPI to trwa to bardzo długo
--
dzeus
Więcej informacji o liście dyskusyjnej pld-devel-pl