sata_sil

[pbern@pbern.biz]

On Sun, 19 Dec 2004 pbern w pbern.biz wrote:
na 2.6.8-4 - sterownik sata_sil laduje sie, wykrywa dyski i teoretycznie 
nie ma problemu.. tylko ze nie mozna sie do nich dostac

2.6.10-0.34 - zwiecha przy probie ladowania sata_sil

w zalaczniku log z 2.6.8-4, ten komunikat apropo przerwania jest 
niezalezny od tego w ktorym slocie pci umieszcze ten kontroler, tak jakby 
on na sile chcial byc z czyms w konflikcie.

Pozdrawiam
Pawel Bernadowski
GG 3377, email kontakt w pbern.biz
-------------- następna część ---------
Dec 20 09:00:46 pldmachine kernel: SCSI subsystem initialized
Dec 20 09:00:46 pldmachine kernel: libata version 1.02 loaded.
Dec 20 09:00:46 pldmachine kernel: sata_sil version 0.54
Dec 20 09:00:46 pldmachine kernel: PCI: Found IRQ 11 for device 0000:02:03.0
Dec 20 09:00:46 pldmachine kernel: ata1: SATA max UDMA/100 cmd 0xD099A080 ctl 0xD099A08A bmdma 0xD099A000 irq 11
Dec 20 09:00:46 pldmachine kernel: ata2: SATA max UDMA/100 cmd 0xD099A0C0 ctl 0xD099A0CA bmdma 0xD099A008 irq 11
Dec 20 09:00:46 pldmachine kernel: ata1: no device found (phy stat 00000000)
Dec 20 09:00:46 pldmachine kernel: scsi0 : sata_sil
Dec 20 09:00:47 pldmachine kernel: irq 11: nobody cared!
Dec 20 09:00:47 pldmachine kernel: [<c021a84a>]
Dec 20 09:00:47 pldmachine kernel: [<c021a930>]
Dec 20 09:00:47 pldmachine kernel: [<c021ab70>]
Dec 20 09:00:47 pldmachine kernel: [<c0218ed8>]
Dec 20 09:00:47 pldmachine kernel: [<c02321ee>]
Dec 20 09:00:47 pldmachine kernel: [<c0232267>]
Dec 20 09:00:47 pldmachine kernel: [<c021ab55>]
Dec 20 09:00:47 pldmachine kernel: [<c0218ed8>]
Dec 20 09:00:47 pldmachine kernel: [<c032007b>]
Dec 20 09:00:47 pldmachine kernel: [<c0223c98>]
Dec 20 09:00:47 pldmachine kernel: [<c0328f12>]
Dec 20 09:00:47 pldmachine kernel: [<d09a73bd>]
Dec 20 09:00:47 pldmachine kernel: [<d09a6bbb>]
Dec 20 09:00:47 pldmachine kernel: [<c0328f12>]
Dec 20 09:00:47 pldmachine kernel: [<d09a7852>]
Dec 20 09:00:47 pldmachine kernel: [<d09a7275>]
Dec 20 09:00:47 pldmachine kernel: [<d09a7124>]
Dec 20 09:00:47 pldmachine kernel: [<d09a961c>]
Dec 20 09:00:47 pldmachine kernel: [<d0848511>]
Dec 20 09:00:47 pldmachine kernel: [<c032d522>]
Dec 20 09:00:47 pldmachine kernel: [<c032d57c>]
Dec 20 09:00:47 pldmachine kernel: [<c032d5bc>]
Dec 20 09:00:47 pldmachine kernel: [<c03738af>]
Dec 20 09:00:47 pldmachine kernel: [<c03739dc>]
Dec 20 09:00:47 pldmachine kernel: [<c0373f56>]
Dec 20 09:00:47 pldmachine kernel: [<c037452f>]
Dec 20 09:00:47 pldmachine kernel: [<c032d83c>]
Dec 20 09:00:47 pldmachine kernel: [<d099d00f>]
Dec 20 09:00:47 pldmachine kernel: [<c0243b4d>]
Dec 20 09:00:47 pldmachine kernel: [<c0217ec7>]
Dec 20 09:00:47 pldmachine kernel: handlers:
Dec 20 09:00:47 pldmachine kernel: [<d09a8eb0>]
Dec 20 09:00:47 pldmachine kernel: Disabling IRQ #11
Dec 20 09:00:47 pldmachine kernel: ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
Dec 20 09:00:47 pldmachine kernel: ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
Dec 20 09:00:47 pldmachine kernel: ata2: dev 0 configured for UDMA/100
Dec 20 09:00:47 pldmachine kernel: scsi1 : sata_sil
Dec 20 09:00:47 pldmachine kernel: Vendor: ATA       Model: ST3160827AS       Rev: 3.42
Dec 20 09:00:47 pldmachine kernel: Type:   Direct-Access                      ANSI SCSI revision: 05
Dec 20 09:01:05 pldmachine kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
Dec 20 09:01:05 pldmachine kernel: SCSI device sda: drive cache: write back
Dec 20 09:01:35 pldmachine kernel: /dev/scsi/host1/bus0/target0/lun0:<3>ata2: command 0x25 timeout, stat 0x50 host_stat 0x4
Dec 20 09:01:35 pldmachine kernel: p1 p3
Dec 20 09:01:35 pldmachine kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0