pliki startujace ifacey AX25

[Przemyslaw 'Dj_RzulF' Knycz]

uhm, widze ze ktos dorzucil to network ax25_networking, ja już wcześniej 
przygotowalem mniej-wiecej jak powinny wygladac pliki do startowania 
interfaceow, podsylam je na grupę jako zalączniki.

ax0 - TNC w trybie KISS
sp0 - TNC w trybie 6pack
bcsf0 - Baycom

Dj_RzulF
-------------- następna część ---------
## Example file for TNC in 6pack mode

# Name of device
DEVICE="sp0"

# Up interface on boot
ONBOOT="no"

# On which port do you have TNC ? (please dont write /dev/)
PORT="ttyS1"

# Call for outgoing TCP/IP connections (usually with ssid 5)
CALL="LN0PLD-5"
 
# What IP do you want to have at this device ?
IPADDR="192.168.44.1"

# Prefix for this device
PREFIX="24"

## Parms for device
#
# MTU for this device - usually 256
MTU="256"

# TX delay in ms
TXD="500"

# Presist
PERSIST="255"

# Slottime
SLOT="100"

# Window
WINDOW="1080"

## Next lines are for gateways/non-gateways stations
#
# Your linux is gateway or client (for client you must fill lines below)
TYPE="client"

# If you have gateway avialible via this interface please enter its IP addres
GW_IPADDR="192.168.44.99"

# Call of gateway serwer (usually with ssid 5)
GW_CALL="LN0GAT-5"

## Beacons
#
# Do you want to send beacon via this modem ?
BEACON="yes"

# Time interleave (minutes)
BEACON_TIME="15"

# Text of beacon
BEACON_TEXT="PLD Linux Distribution"
-------------- następna część ---------
## Example file for Baycom driver

# Name of device
DEVICE="bcsf0"

# Up interface on boot
ONBOOT="no"

# On which port do you have baycom ? (please dont write /dev/)
PORT="ttyS1"

# Call for outgoing TCP/IP connections (usually with ssid 5)
CALL="LN0PLD-5"
 
# What IP do you want to have at this device ?
IPADDR="192.168.44.1"

# Prefix for this device
PREFIX="24"

## Parms for device
#
# MTU for this device - usually 256
MTU="256"

# TX delay in ms
TXD="500"

# Presist
PERSIST="255"

# Slottime
SLOT="100"

# Window
WINDOW="1080"

## Next lines are for gateways/non-gateways stations
#
# Your linux is gateway or client (for client you must fill lines below)
TYPE="client"

# If you have gateway avialible via this interface please enter its IP addres
GW_IPADDR="192.168.44.99"

# Call of gateway serwer (usually with ssid 5)
GW_CALL="LN0GAT-5"

## Beacons
#
# Do you want to send beacon via this modem ?
BEACON="yes"

# Time interleave (minutes)
BEACON_TIME="15"

# Text of beacon
BEACON_TEXT="PLD Linux Distribution"
-------------- następna część ---------
## Example file for TNC in kiss mode

# Name of device
DEVICE="ax0"

# Up interface on boot
ONBOOT="no"

# On which port do you have TNC ? (please dont write /dev/)
PORT="ttyS1"

# Call for outgoing TCP/IP connections (usually with ssid 5)
CALL="LN0PLD-5"
 
# What IP do you want to have at this device ?
IPADDR="192.168.44.1"

# Prefix for this device
PREFIX="24"

## Parms for device
#
# MTU for this device - usually 256
MTU="256"

# TX delay in ms
TXD="500"

# Presist
PERSIST="255"

# Slottime
SLOT="100"

# Window
WINDOW="1080"

## Next lines are for gateways/non-gateways stations
#
# Your linux is gateway or client (for client you must fill lines below)
TYPE="client"

# If you have gateway avialible via this interface please enter its IP addres
GW_IPADDR="192.168.44.99"

# Call of gateway serwer (usually with ssid 5)
GW_CALL="LN0GAT-5"

## Beacons
#
# Do you want to send beacon via this modem ?
BEACON="yes"

# Time interleave (minutes)
BEACON_TIME="15"

# Text of beacon
BEACON_TEXT="PLD Linux Distribution"