!!!!POMOCY!!!!! AD1816

[Michal.Abramowicz@pseinfo.pl]

> Skompilowałem do jaja (bo na module wogóle nie działało).
> Dodałem do grupy audio root-a, i wsio wogóle robie jako
> root.
[abram w pingwin sound]$ less /usr/src/linux/Documentation/sound/AD1816

Documentation for the AD1816(A) sound driver
============================================
NOTE: This driver is still EXPERIMENTAL, so don't use it on production
systems!
Installation:
------------
To get your AD1816(A) based sound card work, you'll have to enable
module support ("Enable loadable module support") and support for
experimental code ("Prompt for development and/or incomplete
code/drivers") during kernel configuration. Enable "Sound card
support", "OSS modules support" and "Support for AD1816(A) based cards
(EXPERIMENTAL)" in the sound configuration menu, too. Be sure, that
you build "Support for AD1816(A) based cards (EXPERIMENTAL)" as a MODULE,
otherwise you may run into problems later.
Now build, install and reboot the new kernel as usual.
Since the AD1816(A) is a P'n'P sound chip you'll usually have to
configure it using the isapnptools. See isapnptools documentation for
details on configuring P'n'P cards.
After you have successfully configured the card using isapnp, you may
load the AD1816 driver using modprobe. A typical modprobe call should
look like this:
  modprobe ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000
/ciach

kurde no to ja nie wiem. jeszcze nie mialem takiego diwajsu do dzwieku
coby nie poszedl pod linuxem.

ps: przestudiuj manaula w docach do kernela
a jak nie to nie wiem
ps1: jak z wawy jestes to mam dzis chwile wolna w pracy to moze wpadnij.

-- 
michal abram abramowicz