lm_sensros (było: Re: rpm i glibc)

[Radosław Kintzi]

On Sun, Oct 20, 2002 at 02:20:33PM +0200, Artur Flinta wrote:
> On Sun, 20 Oct 2002 14:19:50 +0200
> Radosław Kintzi <lists w eth0.prv.pl> wrote:
> > i czy to może być przyczyną moich problemów?
> 
> A jak wygląda temperatura na procku?
Poniżej jest pełny log (co 20min).
Które temp dotyczy procka? Zaraz puszczę jeszcze jedną kompilacje 
i zobaczymy jak w tedy będzie to wyglądało.

Oct 20 14:38:57 KaerMorhen sensord: Sensor alarm: Chip lm78-j-isa-0290: VCore 2: +0.25 V (min = +2.52 V, max = +3.08 V) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord: Sensor alarm: Chip lm78-j-isa-0290: fan1: 0 RPM (min = 3000 RPM, div = 2) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord: Sensor alarm: Chip lm78-j-isa-0290: fan2: 0 RPM (min = 3000 RPM, div = 2) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord: Sensor alarm: Chip lm78-j-isa-0290: fan3: 0 RPM (min = 3000 RPM, div = 2) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord: Chip: lm75-i2c-0-4c
Oct 20 14:38:57 KaerMorhen sensord: Adapter: SMBus PIIX4 adapter at 5000
Oct 20 14:38:57 KaerMorhen sensord: Algorithm: Non-I2C SMBus adapter
Oct 20 14:38:57 KaerMorhen sensord:   temp: 50.5 C (limit = 50.0 C, hysteresis = 60.0 C)
Oct 20 14:38:57 KaerMorhen sensord: Chip: lm78-j-isa-0290
Oct 20 14:38:57 KaerMorhen sensord: Adapter: ISA adapter
Oct 20 14:38:57 KaerMorhen sensord: Algorithm: ISA algorithm
Oct 20 14:38:57 KaerMorhen sensord:   VCore 1: +2.83 V (min = +2.52 V, max = +3.08 V)
Oct 20 14:38:57 KaerMorhen sensord:   VCore 2: +0.25 V (min = +2.52 V, max = +3.08 V) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord:   +3.3V: +3.28 V (min = +2.97 V, max = +3.63 V)
Oct 20 14:38:57 KaerMorhen sensord:   +5V: +5.07 V (min = +4.50 V, max = +5.48 V)
Oct 20 14:38:57 KaerMorhen sensord:   +12V: +12.31 V (min = +10.79 V, max = +13.11 V)
Oct 20 14:38:57 KaerMorhen sensord:   -12V: -11.68 V (min = -13.18 V, max = -10.78 V)
Oct 20 14:38:57 KaerMorhen sensord:   -5V: -5.27 V (min = -5.48 V, max = -4.50 V)
Oct 20 14:38:57 KaerMorhen sensord:   fan1: 0 RPM (min = 3000 RPM, div = 2) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord:   fan2: 0 RPM (min = 3000 RPM, div = 2) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord:   fan3: 0 RPM (min = 3000 RPM, div = 2) [ALARM]
Oct 20 14:38:57 KaerMorhen sensord:   temp: 34 C (limit = 60 C, hysteresis = 50 C)
Oct 20 14:38:57 KaerMorhen sensord:   alarms: Board temperature input
Oct 20 14:38:57 KaerMorhen sensord:   alarms: Chassis intrusion detection
Oct 20 14:38:57 KaerMorhen sensord:   vid: +3.50 V

Pozdrawiam,
Radek
-- 
|: Radosław Kintzi                                                      :|
|: e-mail: redek w eth0.prv.pl :|: home page: coming soon :|: GG: 2199600 :|
|: ==================================================================== :|
|: $#%@    malaga, tikitaki i kasztanki                            @%#$ :|