Re:[EOT;długie] Ra + 2.4.20-9 Cieciwy + 8139too (insmod failed)
Adam Jurkiewicz
a.jurkiewicz w herc.com.pl
Pią, 3 Paź 2003, 14:16:21 CEST
Dnia czw 2. października 2003 15:55, Adam Jurkiewicz napisał:
> Mam sobie zestaw jak w temacie + nową płytę Intela z chipesetm 845
OK, więc, aby zamknąć wątek, odpowiadam wszystkim zainteresowanym.
1. Dla nowych płyt z i845 i wyższymi POLECAM kernel 2.4.22-1 od Pepe
Linux babilon 2.4.22 #1 pią wrz 26 22:46:12 CEST 2003 i686
Intel(R)_Pentium(R)_4_CPU_2.40GHz unknown PLD Linux
2. Pepe - dzięki Ci serdeczne za wykonaną pracę - gdyby nie to,
musiałbym kolejne godziny spędzać na ręcznym zaznaczniu make menuconfig :-)
3. Jest już oczywiście wszystko działające, ACPI oraz IOAPIC jest OK.
Moje wcześniejsze problemy z niewyłączaniem się płyty (halt) też już
nieaktualne. Wszystko wyłącza się prawidłowo i nie muszę odcinać zasilania z
UPS'a, aby wyłączyć z prądu komputer.
4. Dla chętnych poniżej wycinki z konfiguracji serwera : lspci,dmesg,info o
/dev/md (bo mam RAID1), ifconfig, df, free ..... bla..bla
5. Przepraszam, że takie długie i dziękuję wszystkim za pomoc.
==============================================================
Linux babilon 2.4.22 #1 pią wrz 26 22:46:12 CEST 2003 i686
Intel(R)_Pentium(R)_4_CPU_2.40GHz unknown PLD Linux
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge
(rev 03)
Subsystem: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [4105]
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset
Integrated Graphics Device (rev 03) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 5247
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 5247
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 5247
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e880 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 5247
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ec00 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02)
(prog-if 20 [EHCI])
Subsystem: Intel Corp.: Unknown device 5247
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: e6a00000-e6afffff
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) (prog-if 8a
[Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 5247
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
Memory at 1ff00000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02)
Subsystem: Intel Corp.: Unknown device 5247
Flags: medium devsel, IRQ 17
I/O ports at e480 [size=32]
01:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at d800 [size=256]
Memory at ff8ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:05.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550
UART) (rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd: Unknown device 4037
Flags: stepping, medium devsel, IRQ 18
I/O ports at dc00 [size=32]
01:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet
Controller (rev 82)
Subsystem: Intel Corp.: Unknown device 3011
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at ff8fe000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d480 [size=64]
Capabilities: [dc] Power Management version 2
pld ro root=301
Initializing CPU#0
Detected 2400.159 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4784.12 BogoMIPS
Memory: 513668k/522496k available (1158k kernel code, 8440k reserved, 506k
data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2400.1986 MHz.
..... host bus clock speed is 133.3441 MHz.
cpu: 0, clocks: 1333441, slice: 666720
CPU0<T0:1333440,T1:666720,D:0,S:666720,C:1333441>
mtrr: v1.40 (20010327) Richard Gooch (rgooch w atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (1-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
00:00:1d[A] -> 1-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (1-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1)
00:00:1d[B] -> 1-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (1-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1)
00:00:1d[C] -> 1-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (1-23 -> 0xc1 -> IRQ 23 Mode:1 Active:1)
00:00:1d[D] -> 1-23 -> IRQ 23
Pin 1-18 already programmed
IOAPIC[0]: Set PCI routing entry (1-17 -> 0xc9 -> IRQ 17 Mode:1 Active:1)
00:00:1f[B] -> 1-17 -> IRQ 17
Pin 1-16 already programmed
Pin 1-17 already programmed
Pin 1-16 already programmed
IOAPIC[0]: Set PCI routing entry (1-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1)
00:01:08[A] -> 1-20 -> IRQ 20
IOAPIC[0]: Set PCI routing entry (1-21 -> 0xd9 -> IRQ 21 Mode:1 Active:1)
00:01:00[A] -> 1-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (1-22 -> 0xe1 -> IRQ 22 Mode:1 Active:1)
00:01:00[B] -> 1-22 -> IRQ 22
Pin 1-23 already programmed
Pin 1-20 already programmed
Pin 1-22 already programmed
Pin 1-21 already programmed
Pin 1-20 already programmed
Pin 1-23 already programmed
Pin 1-18 already programmed
Pin 1-19 already programmed
Pin 1-17 already programmed
Pin 1-16 already programmed
Pin 1-19 already programmed
Pin 1-18 already programmed
Pin 1-21 already programmed
Pin 1-22 already programmed
Pin 1-17 already programmed
Pin 1-23 already programmed
Pin 1-16 already programmed
Pin 1-20 already programmed
Pin 1-18 already programmed
Pin 1-20 already programmed
Pin 1-22 already programmed
Pin 1-21 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch w atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (1409,7168,1409,4037)
and the manufacturer and name of serial board or modem board
to serial-pci-info w lists.sourceforge.net.
ttyS04 at port 0xdc00 (irq = 18) is a 16550A
ttyS05 at port 0xdc08 (irq = 18) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Initializing Cryptographic API
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 194k freed
VFS: Mounted root (romfs filesystem) readonly.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta5-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPA3017ATU, ATA DISK drive
hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
hdc: WDC WD800JB-00CRA1, ATA DISK drive
hdd: WDC WD800JB-00CRA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 3417976 sectors (1750 MB), CHS=3390/16/63
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63
hdd: attached ide-disk driver.
hdd: host protected area => 1
hdd: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [847/64/63] p1
/dev/ide/host0/bus1/target0/lun0: p1 p2 p3 p4 < p5 p6 > p7 p12 p13 p14 p15
p16 p17 p18
/dev/ide/host0/bus1/target1/lun0: p1 p2 p3 p4 < p5 p6 > p7 p12 p13 p14 p15
p16 p17 p18
VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 120k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
grsec: attempted resource overstep by requesting 3086622720 for RLIMIT_STACK
against limit 8388608 by /bin/mount[mount:28] uid/euid:0/0 gid/egid:0/0,
parent /etc/rc.d/rc.sysinit[rc.sysinit:15] uid/euid:0/0 gid/egid:0/0
grsec: attempted resource overstep by requesting 3086622720 for RLIMIT_STACK
against limit 8388608 by /bin/mount[mount:28] uid/euid:0/0 gid/egid:0/0,
parent /etc/rc.d/rc.sysinit[rc.sysinit:15] uid/euid:0/0 gid/egid:0/0
grsec: attempted resource overstep by requesting 3086622720 for RLIMIT_STACK
against limit 8388608 by /bin/mount[mount:28] uid/euid:0/0 gid/egid:0/0,
parent /etc/rc.d/rc.sysinit[rc.sysinit:15] uid/euid:0/0 gid/egid:0/0
Real Time Clock Driver v1.10e
Adding Swap: 523648k swap-space (priority -1)
Adding Swap: 523648k swap-space (priority -2)
blk: queue e081fb60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue e081ffcc, I/O limit 4095Mb (mask 0xffffffff)
blk: queue e0820114, I/O limit 4095Mb (mask 0xffffffff)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
grsec: attempted resource overstep by requesting 3086622720 for RLIMIT_STACK
against limit 8388608 by /bin/mount[mount:654] uid/euid:0/0 gid/egid:0/0,
parent /sbin/initlog[initlog:653] uid/euid:0/0 gid/egid:0/0
grsec: attempted resource overstep by requesting 3086622720 for RLIMIT_STACK
against limit 8388608 by /bin/mount[mount:654] uid/euid:0/0 gid/egid:0/0,
parent /sbin/initlog[initlog:653] uid/euid:0/0 gid/egid:0/0
usb-uhci.c: $Revision: 1.275 $ time 23:05:45 Sep 26 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xe880, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
[events: 00000014]
[events: 00000014]
md: autorun ...
md: considering ide/host0/bus1/target1/lun0/part1 ...
md: adding ide/host0/bus1/target1/lun0/part1 ...
md: adding ide/host0/bus1/target0/lun0/part1 ...
md: created md0
md: bind<ide/host0/bus1/target0/lun0/part1,1>
md: bind<ide/host0/bus1/target1/lun0/part1,2>
md: running:
<ide/host0/bus1/target1/lun0/part1><ide/host0/bus1/target0/lun0/part1>
md: ide/host0/bus1/target1/lun0/part1's event counter: 00000014
md: ide/host0/bus1/target0/lun0/part1's event counter: 00000014
md: RAID level 1 does not need chunksize! Continuing anyway.
md: raid1 personality registered as nr 3
md0: max total readahead window set to 124k
md0: 1 data-disks, max readahead per data-disk: 124k
raid1: device ide/host0/bus1/target1/lun0/part1 operational as mirror 1
raid1: device ide/host0/bus1/target0/lun0/part1 operational as mirror 0
raid1: raid set md0 active with 2 out of 2 mirrors
md: updating md0 RAID superblock on device
md: ide/host0/bus1/target1/lun0/part1 [events: 00000015]<6>(write)
ide/host0/bus1/target1/lun0/part1's sb offset: 2559680
md: ide/host0/bus1/target0/lun0/part1 [events: 00000015]<6>(write)
ide/host0/bus1/target0/lun0/part1's sb offset: 2559680
md: ... autorun DONE.
[events: 00000014]
[events: 00000014]
md: autorun ...
md: considering ide/host0/bus1/target1/lun0/part3 ...
md: adding ide/host0/bus1/target1/lun0/part3 ...
md: adding ide/host0/bus1/target0/lun0/part3 ...
md: created md1
md: bind<ide/host0/bus1/target0/lun0/part3,1>
md: bind<ide/host0/bus1/target1/lun0/part3,2>
md: running:
<ide/host0/bus1/target1/lun0/part3><ide/host0/bus1/target0/lun0/part3>
md: ide/host0/bus1/target1/lun0/part3's event counter: 00000014
md: ide/host0/bus1/target0/lun0/part3's event counter: 00000014
md: RAID level 1 does not need chunksize! Continuing anyway.
md1: max total readahead window set to 124k
md1: 1 data-disks, max readahead per data-disk: 124k
raid1: device ide/host0/bus1/target1/lun0/part3 operational as mirror 1
raid1: device ide/host0/bus1/target0/lun0/part3 operational as mirror 0
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
md: ide/host0/bus1/target1/lun0/part3 [events: 00000015]<6>(write)
ide/host0/bus1/target1/lun0/part3's sb offset: 24414144
md: ide/host0/bus1/target0/lun0/part3 [events: 00000015]<6>(write)
ide/host0/bus1/target0/lun0/part3's sb offset: 24414144
md: ... autorun DONE.
reiserfs journal head cache initialized
reiserfs: found format "3.6" with standard journal
reiserfs: using ordered data mode
reiserfs: checking transaction log (device md(9,0)) ...
for (md(9,0))
md(9,0):Using r5 hash to sort names
grsec: more alerts, logging disabled for 30 seconds
JFS development version: $Name: v1_1_2 $
SGI XFS snapshot 2.4.22-2003-09-03_04:09_UTC with ACLs, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem ide1(22,6)
Ending clean XFS mount for filesystem: ide1(22,6)
Intel(R) PRO/100 Network Driver - version 2.3.18-k1
Copyright (c) 2003 Intel Corporation
divert: allocating divert_blk for eth0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
e100: eth0 NIC Link is Up 10 Mbps Half duplex
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Installing knfsd (copyright (C) 1996 okir w monad.swb.de).
eth0: no IPv6 routers present
8139too Fast Ethernet driver 0.9.26
divert: allocating divert_blk for eth1
eth1: RealTek RTL8139 Fast Ethernet at 0xe0b3ac00, 00:40:f4:79:c8:a1, IRQ 19
eth1: Identified 8139 chip type 'RTL-8139C'
/dev/md0:
Version : 00.90.00
Creation Time : Thu Oct 2 13:37:07 2003
Raid Level : raid1
Array Size : 2559680 (2.44 GiB 2.67 GB)
Device Size : 2559680 (2.44 GiB 2.67 GB)
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Fri Oct 3 14:00:02 2003
State : dirty, no-errors
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Number Major Minor RaidDevice State
0 22 1 0 active sync /dev/hdc1
1 22 65 1 active sync /dev/hdd1
UUID : 9c8d94dc:3fc0224c:d90d0f39:2638722b
/dev/md1:
Version : 00.90.00
Creation Time : Thu Oct 2 13:48:27 2003
Raid Level : raid1
Array Size : 24414144 (23.28 GiB 25.05 GB)
Device Size : 24414144 (23.28 GiB 25.05 GB)
Raid Devices : 2
Total Devices : 2
Preferred Minor : 1
Persistence : Superblock is persistent
Update Time : Fri Oct 3 14:00:02 2003
State : dirty, no-errors
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Number Major Minor RaidDevice State
0 22 3 0 active sync /dev/hdc3
1 22 67 1 active sync /dev/hdd3
UUID : d496fcee:5b0a117c:9185030d:63966982
System plików rozm. użyte dost. %uż. zamont. na
/dev/hda1 1.6G 722M 836M 47% /
/dev/md0 2.4G 33M 2.4G 2% /opt/backup
/dev/md1 23G 17M 23G 1% /home
/dev/hdc6 4.7G 1.3G 3.3G 28% /opt/mdk-9
/dev/hda1 on / type ext2 (rw)
proc on /proc type proc (rw)
usbdevfs on /proc/bus/usb type usbdevfs (rw)
/dev/md0 on /opt/backup type reiserfs (rw)
pts on /dev/pts type devpts (rw,gid=5,mode=600)
/dev/md1 on /home type jfs (rw)
/dev/hdc6 on /opt/mdk-9 type xfs (rw)
eth0 Link encap:Ethernet HWaddr 00:0C:F1:6F:4F:CF
inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:f1ff:fe6f:4fcf/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:41 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:4980 (4.8 Kb) TX bytes:2070 (2.0 Kb)
Interrupt:20 Base address:0xd480 Memory:ff8fe000-ff8fe038
eth1 Link encap:Ethernet HWaddr 00:40:F4:79:C8:A1
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::240:f4ff:fe79:c8a1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:238 (238.0 b)
Interrupt:19 Base address:0xac00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:64 errors:0 dropped:0 overruns:0 frame:0
TX packets:64 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4604 (4.4 Kb) TX bytes:4604 (4.4 Kb)
total used free shared buffers cached
Mem: 513984 70900 443084 0 3308 38244
-/+ buffers/cache: 29348 484636
Swap: 1047296 0 1047296
--
Adam Jurkiewicz : Inżynier Serwisu Linux
HERC : Linuxowe Systemy Sprzeday Detalicznej
[ http://www.linux.herc.com.pl ]
Numer Gadu-Gadu : 302315
Więcej informacji o liście dyskusyjnej pld-users-pl