Cups + drukowanie na Win 98SE

[Adam Jurkiewicz]

Moi szanowni koledzy i koleżanki,

Mój problem z drukowaniem na Windowsy to :
Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: 
cli_session_request() failed..."
Device URI: smb://192.168.0.110/EPSON

A system : PLD 1.0 Ra + 2.4.20 vanilla, oraz pakiety :
cups-image-lib-1.1.14-23
cups-clients-1.1.14-23
cups-backend-smb-2.2.8a-1
cups-lib-1.1.14-23
cups-1.1.14-23
amba-2.2.8a-1
apache-mod_auth_samba-1.1-5
samba-common-2.2.8a-1
samba-client-2.2.8a-1

a konfigurację :
[root w serwer root]# cat /etc/cups/printers.conf
# Printer configuration file for CUPS v1.1.14
# Written by cupsd on czw 30 paź 2003 15:35:08 GMT
<Printer EPSON>
Info Drukarka iglowa
Location Serwer
DeviceURI parallel:/dev/lp0
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
<Printer ewa>
DeviceURI smb://192.168.0.110/EPSON
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>

a PC z Windowsami :
[root w serwer root]# smbclient -L 192.168.0.110
added interface ip=192.168.0.233 bcast=192.168.0.255 nmask=255.255.255.0
session request to 192.168.0.110 failed (Called name not present)
session request to 192 failed (Called name not present)
session request to *SMBSERVER failed (Called name not present)
[root w serwer root]# nmap 192.168.0.110

Starting nmap V. 3.00 ( www.insecure.org/nmap/ )
Interesting ports on ewa2 (192.168.0.110):
(The 1599 ports scanned but not shown below are in state: closed)
Port       State       Service
139/tcp    open        netbios-ssn
1550/tcp   open        3m-image-lm

Nmap run completed -- 1 IP address (1 host up) scanned in 0 seconds


Czy ktoś coś podobnego może miał ?

-- 
Adam Jurkiewicz : Inżynier Serwisu Linux  
HERC : Linuxowe Systemy Sprzeday Detalicznej
[ http://www.linux.herc.com.pl ]
Numer Gadu-Gadu : 302315