RA + 2.4.20-9 Cieciwy + ospm_system failed.

[Adam Jurkiewicz]

Witam,
mam sobie system :

[root w babilon kernel-2.4]# uname -a
Linux babilon 2.4.20 #1 Wed Jul 2 08:56:46 UTC 2003 i686 
Intel(R)_Pentium(R)_4_CPU_2.40GHz unknown PLD Linux
[root w babilon kernel-2.4]# rpm -q kernel
kernel-2.4.20-9
[root w babilon kernel-2.4]# lspci
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge 
(rev 03)
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset 
Integrated Graphics Device (rev 03)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02)
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
01:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet 
Controller (rev 82)

i halt oczywiscie nie wyłącza zasilania. Więc robię :

[root w babilon kernel-2.4]# modprobe ospm_system

/lib/modules/2.4.20-9/kernel/drivers/acpi/ospm/busmgr/ospm_busmgr.o.gz: 
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including 
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-9/kernel/drivers/acpi/ospm/busmgr/ospm_busmgr.o.gz: insmod 
/lib/modules/2.4.20-9/kernel/drivers/acpi/ospm/busmgr/ospm_busmgr.o.gz failed
/lib/modules/2.4.20-9/kernel/drivers/acpi/ospm/busmgr/ospm_busmgr.o.gz: insmod 
ospm_system failed

a dmesg daje mi :

[root w babilon kernel-2.4]# dmesg | grep AC
 BIOS-e820: 000000001fe40000 - 000000001fe50000 (ACPI data)
 BIOS-e820: 000000001fe50000 - 000000001ff00000 (ACPI NVS)
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00f7170
RSD PTR  v0 [ACPIAM]
ACPI table found: RSDT v1 [INTEL  D845GBV2 8195.550]
ACPI table found: FACP v2 [INTEL  D845GBV2 8195.550]
ACPI table found: APIC v1 [INTEL  D845GBV2 8195.550]
ACPI table found: ASF! v16 [AMIASF I845GASF 0.1]
ACPI: Unsupported table ASF!
Enabling the CPU's according to the ACPI table
    ACPI-0202: *** Warning: Invalid table signature ASF! found
    ACPI-0095: *** Error: Acpi_load_tables: Error getting required tables 
(DSDT/FADT/FACS): AE_BAD_SIGNATURE
    ACPI-0116: *** Error: Acpi_load_tables: Could not load tables: 
AE_BAD_SIGNATURE
ACPI: System description table load failed

Przeszukałem google i lists ale bez większych rezultatów.
Czy ktoś może coś podobnego miał / poradził sobie ?
Będę wdzięczny za pomoc.
-- 
Adam Jurkiewicz : Inżynier Serwisu Linux  
HERC : Linuxowe Systemy Sprzeday Detalicznej
[ http://www.linux.herc.com.pl ]
Numer Gadu-Gadu : 302315