Problemy z dyskiem

Pawel Koska pawel w artfan.net
Wto, 13 Lip 2004, 13:58:43 CEST


Zainstalowalem smartmontools-5.30-1
i smartctl -a /dev/hdd
pokazuje mi to co jest w zalaczniku

Co dalej z tym zrobic nie mam pojecia. Odpalam jakies tam testy, ale
nie wiem co one robia. :)

-- 
Pozdrowienia,
 Pawel Koska
-------------- następna część ---------
# smartctl -a /dev/hdd
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
 
=== START OF INFORMATION SECTION ===
Device Model:     ST3120022A
Serial Number:    3JT04JQL
Firmware Version: 3.06
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Tue Jul 13 13:59:40 2004 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity was
                                        completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.
 
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   055   052   006    Pre-fail  Always       -       90118771
  3 Spin_Up_Time            0x0003   097   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       152
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       275432804
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       8661
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       159
194 Temperature_Celsius     0x0022   047   072   000    Old_age   Always       -       47
195 Hardware_ECC_Recovered  0x001a   055   052   000    Old_age   Always       -       90118771
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   187   000    Old_age   Always       -       68
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0
 
SMART Error Log Version: 1
ATA Error Count: 53 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.
 
Error 53 occurred at disk power-on lifetime: 8634 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 5e f4 89 f0  Error: ICRC, ABRT 1 sectors at LBA = 0x0089f45e = 9040990
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  25 00 08 57 f4 89 f0 00    2102.597  READ DMA EXT
  25 00 08 67 d5 89 f0 00    2102.582  READ DMA EXT
  25 00 08 bf b5 89 f0 00    2102.576  READ DMA EXT
  25 00 08 17 96 89 f0 00    2102.561  READ DMA EXT
  25 00 08 27 77 89 f0 00    2102.546  READ DMA EXT
 
Error 52 occurred at disk power-on lifetime: 8634 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 a6 f1 cb f0  Error: ICRC, ABRT 1 sectors at LBA = 0x00cbf1a6 = 13365670
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  25 00 f0 b7 f0 cb f0 00    2083.772  READ DMA EXT
  25 00 a0 df ec cb f0 00    2083.677  READ DMA EXT
  25 00 a0 3f ea cb f0 00    2083.638  READ DMA EXT
  25 00 00 3f e9 cb f0 00    2083.472  READ DMA EXT
  25 00 00 3f e8 cb f0 00    2083.460  READ DMA EXT
 
Error 51 occurred at disk power-on lifetime: 7865 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 d6 c6 1d f0  Error: ICRC, ABRT 1 sectors at LBA = 0x001dc6d6 = 1951446
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  25 00 d0 07 c6 1d f0 00    1960.748  READ DMA EXT
  25 00 d8 f7 c4 1d f0 00    1960.732  READ DMA EXT
  25 00 00 df c3 1d f0 00    1960.722  READ DMA EXT
  25 00 00 df c2 1d f0 00    1960.706  READ DMA EXT
  25 00 f8 e7 c1 1d f0 00    1960.698  READ DMA EXT
 
Error 50 occurred at disk power-on lifetime: 7865 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 4e d3 37 f0  Error: ICRC, ABRT 1 sectors at LBA = 0x0037d34e = 3658574
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  25 00 08 47 d3 37 f0 00     944.739  READ DMA EXT
  25 00 08 47 d3 37 f0 00     944.737  READ DMA EXT
  10 00 3f 00 00 00 f0 00     944.735  RECALIBRATE [OBS-4]
  25 00 08 47 d3 37 f0 00     947.239  READ DMA EXT
  25 00 08 47 d3 37 f0 00     946.629  READ DMA EXT
 
Error 49 occurred at disk power-on lifetime: 7865 hours
  When the command that caused the error occurred, the device was active or idle.
 
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 4e d3 37 f0  Error: ICRC, ABRT 1 sectors at LBA = 0x0037d34e = 3658574
 
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
  -- -- -- -- -- -- -- --   ---------  --------------------
  25 00 08 47 d3 37 f0 00     944.739  READ DMA EXT
  10 00 3f 00 00 00 f0 00     944.737  RECALIBRATE [OBS-4]
  25 00 08 47 d3 37 f0 00     944.735  READ DMA EXT
  25 00 08 47 d3 37 f0 00     944.732  READ DMA EXT
  25 00 08 4f d3 37 f0 00     946.629  READ DMA EXT
 
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      8659         -
# 2  Short offline       Completed without error       00%      8658         -


Więcej informacji o liście pld-users-pl