Problemy z dyskiem
Pawel Koska
pawel w artfan.net
Śro, 14 Lip 2004, 12:45:47 CEST
Witaj Maciej,
W Twoim liście datowanym 13 lipca 2004 (22:55:21) można przeczytać:
> Pawel Koska wrote:
> Próbowałeś wyłaczyć całkowicie DMA (i acpi na wszelki wypadek też) i
> wtedy uruchomić te testy? Jeśli nie, to spróbuj, może się coś wyjaśni...
Tak wiec wylaczylem DMA komenda hdparm -d /dev/hdd
teraz jest tak:
# hdparm /dev/hdd
/dev/hdd:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 16383/255/63, sectors = 234441648, start = 0
Co do ACPI to jeszcze nie kombinowalem, nie jestem pewien jak
wylaczyc. Ale ja chyba tego nawet nie wlaczalem... :)
znaczy sie w lilo.conf ma byv cos takiego ??
image=/boot/vmlinuz
root=/dev/hda1
label=pld-smp-noacpi
initrd=/boot/initrd-2.6.7-1p4.gz
append="acpi=off"
Kernel jest dystrybucyjny (ac-ready), tylko initrd generowalem nowe bo
cos sie pomieszalo i system sie nie podnosil.
A jak teraz wyglada
# smartctl -a /dev/hdd
jak jest w zalaczniku.
Aha, moze mi ktos powiedziec na co mam zwracac uwage ??
--
Pozdrowienia,
Pawel Koska
-------------- następna część ---------
# smartctl -a /dev/hdd
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3120022A
Serial Number: 3JT04JQL
Firmware Version: 3.06
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Wed Jul 14 12:42:26 2004 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity was
completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 054 052 006 Pre-fail Always - 7090803
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 152
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 277314750
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8683
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 160
194 Temperature_Celsius 0x0022 046 072 000 Old_age Always - 46
195 Hardware_ECC_Recovered 0x001a 054 052 000 Old_age Always - 7090803
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 187 000 Old_age Always - 72
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 53 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.
Error 53 occurred at disk power-on lifetime: 8634 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 5e f4 89 f0 Error: ICRC, ABRT 1 sectors at LBA = 0x0089f45e = 9040990
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 08 57 f4 89 f0 00 2102.597 READ DMA EXT
25 00 08 67 d5 89 f0 00 2102.582 READ DMA EXT
25 00 08 bf b5 89 f0 00 2102.576 READ DMA EXT
25 00 08 17 96 89 f0 00 2102.561 READ DMA EXT
25 00 08 27 77 89 f0 00 2102.546 READ DMA EXT
Error 52 occurred at disk power-on lifetime: 8634 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 a6 f1 cb f0 Error: ICRC, ABRT 1 sectors at LBA = 0x00cbf1a6 = 13365670
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 f0 b7 f0 cb f0 00 2083.772 READ DMA EXT
25 00 a0 df ec cb f0 00 2083.677 READ DMA EXT
25 00 a0 3f ea cb f0 00 2083.638 READ DMA EXT
25 00 00 3f e9 cb f0 00 2083.472 READ DMA EXT
25 00 00 3f e8 cb f0 00 2083.460 READ DMA EXT
Error 51 occurred at disk power-on lifetime: 7865 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 d6 c6 1d f0 Error: ICRC, ABRT 1 sectors at LBA = 0x001dc6d6 = 1951446
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 d0 07 c6 1d f0 00 1960.748 READ DMA EXT
25 00 d8 f7 c4 1d f0 00 1960.732 READ DMA EXT
25 00 00 df c3 1d f0 00 1960.722 READ DMA EXT
25 00 00 df c2 1d f0 00 1960.706 READ DMA EXT
25 00 f8 e7 c1 1d f0 00 1960.698 READ DMA EXT
Error 50 occurred at disk power-on lifetime: 7865 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 4e d3 37 f0 Error: ICRC, ABRT 1 sectors at LBA = 0x0037d34e = 3658574
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 08 47 d3 37 f0 00 944.739 READ DMA EXT
25 00 08 47 d3 37 f0 00 944.737 READ DMA EXT
10 00 3f 00 00 00 f0 00 944.735 RECALIBRATE [OBS-4]
25 00 08 47 d3 37 f0 00 947.239 READ DMA EXT
25 00 08 47 d3 37 f0 00 946.629 READ DMA EXT
Error 49 occurred at disk power-on lifetime: 7865 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 4e d3 37 f0 Error: ICRC, ABRT 1 sectors at LBA = 0x0037d34e = 3658574
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 08 47 d3 37 f0 00 944.739 READ DMA EXT
10 00 3f 00 00 00 f0 00 944.737 RECALIBRATE [OBS-4]
25 00 08 47 d3 37 f0 00 944.735 READ DMA EXT
25 00 08 47 d3 37 f0 00 944.732 READ DMA EXT
25 00 08 4f d3 37 f0 00 946.629 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 8678 -
# 2 Conveyance offline Fatal or unknown error 00% 8676 -
# 3 Extended offline Aborted by host 90% 8676 -
# 4 Short offline Aborted by host 70% 8676 -
# 5 Extended offline Completed without error 00% 8672 -
# 6 Conveyance captive Fatal or unknown error 00% 8670 -
# 7 Extended offline Completed without error 00% 8659 -
# 8 Short offline Completed without error 00% 8658 -
Więcej informacji o liście pld-users-pl