[2.6] APIC error on CPU0: 40(40)

[Łukasz Mierzwa]

Dnia Tue, 1 Jun 2004 18:58:47 +0200, Paweł Zaskórski <p.zaskorski w wp.pl>  
napisał:

PS. Czy na tej płycie lm_sensors wyświetla komuś temperaturę procesora?
     Ja po skonfigurowaniu programu przy pomocy sensors-detect, otrzymuję:

# sensors (z pakietu lm_sensors-2.8.4-1):
w83697hf-isa-0290
Adapter: ISA adapter
ERROR: Can't get IN0 data!
ERROR: Can't get IN2 data!
ERROR: Can't get IN3 data!
ERROR: Can't get IN4 data!
ERROR: Can't get IN5 data!
ERROR: Can't get IN6 data!
ERROR: Can't get IN7 data!
ERROR: Can't get IN8 data!
ERROR: Can't get FAN1 data!
ERROR: Can't get FAN2 data!
ERROR: Can't get TEMP1 data!
ERROR: Can't get TEMP2 data!
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
           Sound alarm disabled

eeprom-i2c-0-51
Adapter: SMBus Via Pro adapter at 0400
Memory type:            DDR SDRAM DIMM
Memory size (MB):       256

eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 0400
Memory type:            DDR SDRAM DIMM
Memory size (MB):       256

# lsmod:
w83627hf               23556  0
eeprom                  6408  0
i2c_sensor              2560  2 w83627hf,eeprom
i2c_isa                 1920  0
i2c_viapro              6028  0
i2c_core               18308  5  
w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_viapro


lm_sensors 2.8.6 i temperaturka sie pokaże, jajka >=2.6.5 go wymagają.

--
Łukasz Mierzwa

===============
@: prymitive w xl.wp.pl
gg: 1945196
tlen:prymitive w tlen.pl