Wypalanie płytek na jajku 2.6 - nagrywarka odmawia posłuszeństwa

[Quickest]

On Sat, 09 Oct 2004 14:28:39 +0200
Tomasz Luczak <tlu w technodat.com.pl> wrote:

> 
> 
> Quickest wrote:
> > Mam problem z wypalaniem płyt CD na jajku 2.6.
> > 
> [..]
> > Zatem co jest nie tak??? Dlaczego nie mogę wypalić żadnej płytki
> > potrzebna jest mi jakaś emulacja? wpisy do /etc/modules.conf czy
> > gdzieś indziej ? A może jeszcze coś innego?
> > Będę wdzięczny za jakiekolwiek wskazówki, a najlepiej jak
> > podpowiedział mi ktoś, kto już wypala płytki mając jajko 2.6.x?
> > 
> wywal wszelkie ide-scsi i spróbuj tak
> cdrecord .... dev=/dev/hdc
> u mnie tak działa (2.6.8.1 -- Slackware 10.current)
> 

Teraz sytuacja wygląda u mnie następująco:

[root w danger root]# cdrecord -dev=ATA -scanbus
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
cdrecord: Warning: Running on Linux-2.6.7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
scsibus1:
        1,0,0   100) 'LG      ' 'DVD-ROM DRD8080B' '1.04' Removable
CD-ROM
        1,1,0   101) 'RICOH   ' 'CD-R/RW MP7163A ' 'BR08' Removable
CD-ROM
        1,2,0   102) *
        1,3,0   103) *
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *
[root w danger root]#

DVD-ROM to /dev/hdc
CD-RW to /dev/hdd

Zrobiłem tak jak mówisz... i teraz wygląda to tak, że po raz raz płytkę
wypali dobrze, raz zwróci błąd, raz wypali dobrze i raz błąd... taka
karuzela niewiedzieć czemu... może problem tkwi w sterownikach?

[root w danger root]# readcd dev=/dev/hdd f=cd1_moh.iso
Read  speed:  5645 kB/s (CD  32x, DVD  4x).
Write speed:  2822 kB/s (CD  16x, DVD  2x).
Capacity: 310686 Blocks = 621372 kBytes = 606 MBytes = 636 prMB
Sectorsize: 2048 Bytes
Copy from SCSI (1,1,0) disk to file 'cd1_moh.iso'
end:    310686
addr:   310686 cnt: 33
Time total: 304.256sec
Read 621372.00 kB at 2042.3 kB/sec.
[root w danger root]# cdrecord -v -speed=16 dev=/dev/hdd -data cd1_moh.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
cdrecord: Warning: Running on Linux-2.6.7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'RICOH   '
Identifikation : 'CD-R/RW MP7163A '
Revision       : 'BR08'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   606 MB
Total size:      696 MB (69:02.50) = 310688 sectors
Lout start:      697 MB (69:04/38) = 310688 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 49161
Forcespeed is OFF.
Starting to write CD/DVD at speed 12 in real TAO mode for single
session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
cdrecord: Success. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 91 AF 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x91 Qual 0xAF (vendor unique sense code 0x91) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 52.799s timeout 60s
cdrecord: OPC failed.
Writing  time:   52.837s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
[root w danger root]#

i crash... nie wypala

-- 
Jakub "Quickest" Kozicki
IMSIS, Bydgoszcz
.mailto: q u i c k e s t <at> p l d - l i n u x <dot> n e t  
RLU: #273864 | "Los jest ślepy, ale trafia bez pudła."
-- 
Jakub "Quickest" Kozicki
IMSIS, Bydgoszcz
.mailto: q u i c k e s t <at> p l d - l i n u x <dot> n e t  
RLU: #273864 | "Los jest ślepy, ale trafia bez pudła."