CD-ROM na Serial-ATA

[Ryszard Mielcarek]

Witam,
mam problem z 'dobraniem sie' do CDka.

Z dmesga :

Aug 14 13:19:38 mind kernel: ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 
bmdma 0xBFA0 irq 14
Aug 14 13:19:38 mind kernel: ata1: dev 0 cfg 49:2b00 82:346b 83:5b29 
84:4003 85:3469 86:1a09 87:4003 88:203f
Aug 14 13:19:38 mind kernel: ata1: dev 0 ATA, max UDMA/100, 117210240 
sectors:
Aug 14 13:19:38 mind kernel: ata1: dev 0 configured for UDMA/100
Aug 14 13:19:38 mind kernel: scsi0 : ata_piix
Aug 14 13:19:38 mind kernel: Vendor: ATA       Model: FUJITSU MHT2060A 
Rev: 006C
Aug 14 13:19:38 mind kernel: Type:   Direct-Access 
ANSI SCSI revision: 05
Aug 14 13:19:38 mind kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 
bmdma 0xBFA8 irq 15
Aug 14 13:19:38 mind kernel: ata2: dev 0 cfg 49:0b00 82:0000 83:0000 
84:0000 85:0000 86:0000 87:0000 88:0407
Aug 14 13:19:38 mind kernel: ata2: dev 0 ATAPI, max UDMA/33
Aug 14 13:19:38 mind kernel: ata2: dev 0 configured for UDMA/33
Aug 14 13:19:38 mind kernel: scsi1 : ata_piix
Aug 14 13:19:38 mind kernel: SCSI device sda: 117210240 512-byte hdwr 
sectors (60012 MB)
Aug 14 13:19:38 mind kernel: SCSI device sda: drive cache: write back
Aug 14 13:19:38 mind kernel: SCSI device sda: 117210240 512-byte hdwr 
sectors (60012 MB)
Aug 14 13:19:38 mind kernel: SCSI device sda: drive cache: write back
Aug 14 13:19:38 mind kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 
p4 < p5 p6 p7 >
Aug 14 13:19:38 mind kernel: Attached scsi disk sda at scsi0, channel 0, 
id 0, lun 0


Nie mam zielonego pojęcia czego może mi brakować, bądź też - gdzie szukać 
device'a  - żadne /dev/*cd*, ani nic co bym podejrzewal..




Pozdrawiam
--------------------------------------------------------
Ryszard Mielcarek       |    crazy(małpka)geeks(.)pl   |
http://crazy.geeks.pl   |    http://fun.mif.one.pl     |
--------------------------------------------------------