lm_sensors i net-snmp w PLD

[Michał Panasiewicz]

niestety nie działa pobieranie przez snmp wartosci podawanych przez
lm_sensors (a scislej nie podaje ich snmpd)

[root w serwer ~]# snmpwalk -v 2c -c public localhost host.hrSensor
host.hrSensor: Unknown Object Identifier (Sub-id not found: host ->
hrSensor)

[root w serwer ~]# cat /etc/snmp/snmpd.conf | grep -v ^#

syslocation LOCATON
syscontact <michalp w domena>

com2sec local           localhost       public
com2sec theworld        default         public

group   MyRWGroup       v2c             local
group   MyROGroup       v2c             theworld

view all    included  .1                               80

access MyROGroup ""      any            noauth          exact   all
none   none
access MyRWGroup ""      any            noauth          exact   all
all    none

proc mountd
proc httpd.prefork
proc sshd 10 1
proc smbd
proc nmbd
proc /usr/bin/perl
proc nfsd
proc /usr/lib/courier-authlib/authdaemond
proc cupsd

disk /          10000
disk /var       10000
disk /home      10000
disk /usr       10000
disk /tmp       10000
disk /boot      10000

load 12 14 14

poldek:/all-avail> ls -I *snmp* *sensor*
lm_sensors-2.9.2-3
lm_sensors-libs-2.9.2-3
lm_sensors-sensord-2.9.2-3
nagios-plugins-sensors-1.4.2-2
nagios-plugins-snmp-1.4.2-2
nagios-snmp-plugins-1.0-3
net-snmp-5.2.1.2-3
net-snmp-libs-5.2.1.2-3
net-snmp-mibs-5.2.1.2-3
net-snmp-snmpconf-5.2.1.2-3
net-snmp-snmptrapd-5.2.1.2-3
net-snmp-tkmib-5.2.1.2-3
net-snmp-utils-5.2.1.2-3
net-snmp-utils-perl-5.2.1.2-3
php-snmp-5.1.1-3

[root w serwer ~]# snmpwalk -v 2c -c public localhost .1.3.6.1.4.1.2021.51
UCD-SNMP-MIB::ucdavis.51 = No Such Object available on this agent at
this OID
[root w serwer ~]# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.70 V (min = +1.57 V, max = +1.73 V)
VCore 2: +2.62 V (min = +1.57 V, max = +1.73 V)
+3.3V: +3.38 V (min = +3.14 V, max = +3.47 V)
+5V: +5.03 V (min = +4.76 V, max = +5.24 V)
+12V: +11.92 V (min = +10.82 V, max = +13.19 V)
-12V: -7.18 V (min = -13.18 V, max = -10.80 V) <-----------------????
-5V: -2.64 V (min = -5.25 V, max = -4.75 V) <-----------------???
V5SB: +5.51 V (min = +4.76 V, max = +5.24 V)
VBat: +3.10 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 2973 RPM, div = 2)
fan2: 0 RPM (min = 3026 RPM, div = 2)
fan3: 0 RPM (min = 5357 RPM, div = 2)
temp1: +37; (high = -43;, hyst = +61;) sensor = thermistor ALARM
temp2: +42.5; (high = +60;, hyst = +55;) sensor = thermistor
temp3: +39.0; (high = +60;, hyst = +55;) sensor = thermistor
vid: +1.650 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
 Sound alarm disabled


-- 
Michał Panasiewicz
jabber: wolvverine [ at ] chrome [ dot ] pl 
e-mail: wolvverine [ at ] tlen [ dot ] pl , wolvverine [ at ] pld-linux [ dot ] org
Potrzebujesz Informatyka/Administratora (Warszawa) -skontaktuj sie ze mną