cups + OKI B4350 na sterownikach generic/PCL6

[Tomek]

Użytkownik Michał Panasiewicz napisał:

>Dnia 08-01-2005, sob o godzinie 18:13 +0100, Tomek napisał(a):
>  
>
>>Mam pewne pytanko w zwiazku z ze zainstalowalem sobie drukarke OKI 4350
>>na cupsie, ale zauwazylem ze drukarka dukuje znacznie wolniej na linuxie 
>>niz na windowsie.
>>Gdy daje jej obrazek do wydrukowania to pierw zastanawia sie z 1 minute 
>>a dopiero pozniej zaczyna drukowac, na windzie robi to odrazu.
>>O co chodzi???
>>Jakies ustawienia???
>>
>>Poradzcie mi !!!
>>    
>>
>
>moze tak wpierw podrzuciłbyś jak masz ją skonfigurowaną i co w logach
>jest raczej na tak postawione pytanie trudno jest odpowiedziec
>(no chyba ze ktoś akurat tego modelu używa)
>
>
>  
>
No to daje resztę danych które niechcący pominąłem.

root w bestguest cups $ cat /etc/cups/cupsd.conf | grep -v ^# | grep -v ^$
Classification none
DefaultCharset UTF-8
DefaultLanguage en
Printcap /etc/printcap
PrintcapFormat BSD
RemoteRoot remroot
SystemGroup sys
ServerCertificate /etc/cups/ssl/server.crt
ServerKey /etc/cups/ssl/server.key
<Location />
Encryption IfRequested
Satisfy All
Order deny,allow
Deny From All
Allow From 127.0.0.1
</Location>
<Location /admin>
AuthType Basic
AuthClass System
Encryption IfRequested
Satisfy All
Order deny,allow
Deny From All
Allow From 127.0.0.1
</Location>
HostnameLookups Off
KeepAlive On
KeepAliveTimeout 60
MaxClients 100
MaxRequestSize 0m
Timeout 300
Listen *:631
AccessLog /var/log/cups/access_log
ErrorLog /var/log/cups/error_log
PageLog /var/log/cups/page_log
MaxLogSize 1m
LogLevel info
PreserveJobHistory On
PreserveJobFiles Off
AutoPurgeJobs Yes
MaxJobs 0
MaxJobsPerPrinter 0
MaxJobsPerUser 0
User lp
Group sys
RIPCache 8m
FilterLimit 0
DataDir /usr/share/cups
DocumentRoot /usr/share/doc/cups
RequestRoot /var/spool/cups
ServerBin /usr/lib/cups
ServerRoot /etc/cups
TempDir /var/spool/cups/tmp
Browsing On
BrowseProtocols CUPS
BrowsePort 631
BrowseInterval 30
BrowseTimeout 300
BrowseOrder allow,deny
ImplicitClasses On
ImplicitAnyClasses Off
HideImplicitMembers Yes
BrowseShortNames Yes

oraz logi:
cat /var/log/cups/access_log
..........................(za duzo tego wiec skracam)
localhost - - [08/Jan/2005:14:13:38 +0100] "GET /ppd/B4350.ppd HTTP/1.1" 
200 13600
localhost - - [08/Jan/2005:14:13:38 +0100] "POST / HTTP/1.1" 200 385
localhost - - [08/Jan/2005:14:13:50 +0100] "POST /printers/ HTTP/1.1" 
200 112
localhost - - [08/Jan/2005:14:13:50 +0100] "POST /printers/ HTTP/1.1" 
200 224
localhost - - [08/Jan/2005:14:13:50 +0100] "POST /classes/ HTTP/1.1" 200 224
localhost - - [08/Jan/2005:14:13:50 +0100] "POST /printers/ HTTP/1.1" 
200 112
localhost - - [08/Jan/2005:14:13:50 +0100] "POST /printers/ HTTP/1.1" 
200 373
localhost - - [08/Jan/2005:14:14:03 +0100] "POST / HTTP/1.1" 200 202
localhost - - [08/Jan/2005:14:14:03 +0100] "GET /ppd/B4350.ppd HTTP/1.1" 
200 13600
localhost - - [08/Jan/2005:14:15:57 +0100] "POST / HTTP/1.1" 200 137
localhost - - [08/Jan/2005:14:15:57 +0100] "POST / HTTP/1.1" 200 137
localhost - - [08/Jan/2005:14:15:57 +0100] "POST / HTTP/1.1" 200 77
localhost - - [08/Jan/2005:14:15:57 +0100] "POST /printers/B4350 
HTTP/1.1" 200 78767
localhost - - [08/Jan/2005:15:04:39 +0100] "POST / HTTP/1.1" 200 137
localhost - - [08/Jan/2005:15:04:39 +0100] "POST / HTTP/1.1" 200 137
localhost - - [08/Jan/2005:15:04:39 +0100] "POST / HTTP/1.1" 200 77
localhost - - [08/Jan/2005:15:04:39 +0100] "POST /printers/B4350 
HTTP/1.1" 200 17773

w /var/log/cups/page_log ciagle linijki:
B4350 tomek 2 [08/Jan/2005:15:04:39 +0100] 2 1 - localhost

root w bestguest cups $ cat error_log
.............................(wyciete)
I [07/Jan/2005:18:35:36 +0100] Installing config file 
"/etc/cups/cupsd.conf"...
I [07/Jan/2005:18:35:36 +0100] Loaded configuration file 
"/etc/cups/cupsd.conf"
I [07/Jan/2005:18:35:36 +0100] Configured for up to 100 clients.
I [07/Jan/2005:18:35:36 +0100] Allowing up to 100 client connections per 
host.
I [07/Jan/2005:18:35:36 +0100] Partial reload complete.
I [07/Jan/2005:18:37:10 +0100] Adding start banner page "none" to job 33.
I [07/Jan/2005:18:37:10 +0100] Adding end banner page "none" to job 33.
I [07/Jan/2005:18:37:10 +0100] Job 33 queued on 'B4350' by 'tomek'.
I [07/Jan/2005:18:37:10 +0100] Started filter 
/usr/lib/cups/filter/pstops (PID 5273) for job 33.
I [07/Jan/2005:18:37:10 +0100] Started filter 
/usr/lib/cups/filter/foomatic-rip (PID 5274) for job 33.
I [07/Jan/2005:18:37:10 +0100] Started backend /usr/lib/cups/backend/usb 
(PID 5275) for job 33.
I [07/Jan/2005:19:55:02 +0100] Scheduler shutting down normally.
I [07/Jan/2005:19:55:03 +0100] Loaded configuration file 
"/etc/cups/cupsd.conf"
I [07/Jan/2005:19:55:03 +0100] Configured for up to 100 clients.
I [07/Jan/2005:19:55:03 +0100] Allowing up to 100 client connections per 
host.
I [07/Jan/2005:19:55:03 +0100] Full reload is required.
I [07/Jan/2005:19:55:03 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 316 
PPDs...
I [07/Jan/2005:19:55:03 +0100] LoadPPDs: No new or changed PPDs...
I [07/Jan/2005:19:55:03 +0100] Full reload complete.
I [07/Jan/2005:20:22:37 +0100] Adding start banner page "none" to job 34.
I [07/Jan/2005:20:22:37 +0100] Adding end banner page "none" to job 34.
I [07/Jan/2005:20:22:37 +0100] Job 34 queued on 'B4350' by 'tomek'.
I [07/Jan/2005:20:22:37 +0100] Started backend /usr/lib/cups/backend/usb 
(PID 6048) for job 34.
I [07/Jan/2005:20:25:15 +0100] Printer 'B4350' deleted by 'root'.
I [07/Jan/2005:20:25:15 +0100] Saving printers.conf...
E [07/Jan/2005:21:08:48 +0100] PID 6048 stopped with status 1!
I [07/Jan/2005:21:08:48 +0100] Hint: Try setting the LogLevel to "debug" 
to find out more.
I [08/Jan/2005:01:36:51 +0100] Scheduler shutting down normally.
I [08/Jan/2005:12:11:35 +0100] Loaded configuration file 
"/etc/cups/cupsd.conf"
I [08/Jan/2005:12:11:35 +0100] Configured for up to 100 clients.
I [08/Jan/2005:12:11:35 +0100] Allowing up to 100 client connections per 
host.
I [08/Jan/2005:12:11:35 +0100] Full reload is required.
I [08/Jan/2005:12:11:36 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 316 
PPDs...
I [08/Jan/2005:12:11:36 +0100] LoadPPDs: No new or changed PPDs...
I [08/Jan/2005:12:11:36 +0100] Full reload complete.
E [08/Jan/2005:14:06:51 +0100] print_job: resource name 
'/printers/B4350' no good!
E [08/Jan/2005:14:07:43 +0100] print_job: resource name 
'/printers/B4350' no good!
I [08/Jan/2005:14:13:13 +0100] Setting B4350 device-uri to 
"usb:/dev/usb/lp0" (was "file:/dev/null".)
I [08/Jan/2005:14:13:13 +0100] Saving printers.conf...
I [08/Jan/2005:14:13:13 +0100] New printer 'B4350' added by 'root'.
I [08/Jan/2005:14:13:13 +0100] Saving printers.conf...
I [08/Jan/2005:14:13:13 +0100] Printer 'B4350' modified by 'root'.
I [08/Jan/2005:14:13:13 +0100] Saving printers.conf...
I [08/Jan/2005:14:13:13 +0100] Printer 'B4350' now accepting jobs ('root').
I [08/Jan/2005:14:13:13 +0100] Saving printers.conf...
I [08/Jan/2005:14:13:13 +0100] Printer 'B4350' started by 'root'.
I [08/Jan/2005:14:15:57 +0100] Adding start banner page "none" to job 1.
I [08/Jan/2005:14:15:57 +0100] Adding end banner page "none" to job 1.
I [08/Jan/2005:14:15:57 +0100] Job 1 queued on 'B4350' by 'tomek'.
I [08/Jan/2005:14:15:57 +0100] Started filter 
/usr/lib/cups/filter/pstops (PID 5449) for job 1.
I [08/Jan/2005:14:15:57 +0100] Started filter 
/usr/lib/cups/filter/foomatic-rip (PID 5450) for job 1.
I [08/Jan/2005:14:15:57 +0100] Started backend /usr/lib/cups/backend/usb 
(PID 5451) for job 1.
I [08/Jan/2005:15:04:39 +0100] Adding start banner page "none" to job 2.
I [08/Jan/2005:15:04:39 +0100] Adding end banner page "none" to job 2.
I [08/Jan/2005:15:04:39 +0100] Job 2 queued on 'B4350' by 'tomek'.
I [08/Jan/2005:15:04:39 +0100] Started filter 
/usr/lib/cups/filter/pstops (PID 5552) for job 2.
I [08/Jan/2005:15:04:39 +0100] Started filter 
/usr/lib/cups/filter/foomatic-rip (PID 5553) for job 2.
I [08/Jan/2005:15:04:39 +0100] Started backend /usr/lib/cups/backend/usb 
(PID 5554) for job 2.

Są jakies propozycje co do zmiany ustawien aby drukarka szybciej chodzila??

Pozdrawiam !!!
Tomek