jak sprawdzić kartę?

[Adam Gapiński]

Witam!
Takie coś co jakiś czas mam:

64 bytes from 192.168.1.1: icmp_seq=155 ttl=255 time=22998 ms
64 bytes from 192.168.1.1: icmp_seq=156 ttl=255 time=21998 ms
64 bytes from 192.168.1.1: icmp_seq=157 ttl=255 time=20998 ms
64 bytes from 192.168.1.1: icmp_seq=158 ttl=255 time=19998 ms
64 bytes from 192.168.1.1: icmp_seq=159 ttl=255 time=18999 ms
64 bytes from 192.168.1.1: icmp_seq=160 ttl=255 time=17999 ms

Po /etc/rc.d/init.d/network restart:

64 bytes from 192.168.1.1: icmp_seq=196 ttl=255 time=0.205 ms
64 bytes from 192.168.1.1: icmp_seq=197 ttl=255 time=0.214 ms
64 bytes from 192.168.1.1: icmp_seq=198 ttl=255 time=0.214 ms
64 bytes from 192.168.1.1: icmp_seq=199 ttl=255 time=0.204 ms
64 bytes from 192.168.1.1: icmp_seq=200 ttl=255 time=0.209 ms

Czyli wraca do normy...
Jak to zdiagnozować? System to Ra+security, karta 3c905
Jak coś jeszcze potrzeba to dajcie znać...

$ sudo ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:01:02:23:89:D6
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::201:2ff:fe23:89d6/10 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9789934 errors:1 dropped:0 overruns:0 frame:1
          TX packets:10153904 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:3224441924 (3075.0 Mb)  TX bytes:1155896643 (1102.3 Mb)
          Interrupt:10 Base address:0x6400

$ sudo lsmod
Module                  Size  Used by
x25                    24748   0  (autoclean)
appletalk              18892   0  (autoclean)
ipx                    13488   0  (autoclean)
ax25                   38364   0  (autoclean)
ipv6                  100000  -1  (autoclean)
3c59x                  21704   1  (autoclean)
ext2                   43016   2  (autoclean)
ide-disk                9536   3  (autoclean)
ide-mod               153376   3  (autoclean) [ide-disk]

$ uname -a
Linux zerwer1 2.2.26 #1 Thu Jun 17 19:24:48 CEST 2004 i586 unknown unknown 
PLD Linux

pozdrawiam
-- 
Adam Gapiński ::::: adas-news (at) artikon (dot) one (dot) pl
Na pytanie *Która godzina?* chciałem zainstalować rdate... (/me 18.05.2004)