Wypalanie DVD

[Grzegorz Sójka]

Ściągnąłem sobie płytką i próbowałem ją spalić. Oto co wyszło:


[root w zeus suse.10]# dvdrecord fs=4096k driveropts=burnfree -v speed=16
-dao -pad -overburn -data SUSE-Linux-10.1-GM-DVD-i386.iso
dvdrtools v0.2.1
Portions (C) 2002-2005 Ark Linux <bero w arklinux.org>
This program is free software; you can redistribute it and/or modify it
under
the terms of the GNU General Public License as published by the Free
Software
Foundation; either version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but
WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR
A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with
this program; see the file COPYING.  If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i686-pld-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c     1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4167B'
Revision       : 'DL10'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  3576 MB         padsize:  30 KB
Total size:     4106 MB (406:52.46) = 1830935 sectors
Lout start:     4107 MB (406:54/35) = 1830935 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
  ATIP start of lead out: 157789 (35:05/64)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 464169
Starting to write CD/DVD at speed 16 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
dvdrecord: Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 1831110
Track 01:   0 of 3576 MB written.dvdrecord: Input/output error.
write_g1: scsi sendcmd: no error
CDB:  2A 00 00 1B F0 C6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0E 21 02 00 00 00 00 00 00
00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No
matching qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 10 00 00 00 0E 00 00 00 00 00 00
Writing  time:   18.289s
Fixating...
Fixating time:    0.006s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


Płytka to Philips DVD+R. Czy robię coś nie tak jak trzeba?

-- 
   ______________Pozdrówka___________
  /    ___  ___  ___  ___    ___
 / _  /__/ ___/ /_   /__  / /_   /_/
/__/ / |  /__  /__  ___/ / /__  / |