coś nie tak z xfsprogs-3.2.3-2
Jacek Osiecki
josiecki w silvercube.pl
Czw, 1 Paź 2015, 19:09:40 CEST
Witam,
Instalowałem świeżutki serwer.
Wszystkie partycje ext3, jedna - większa - xfs.
I wszystko by było OK, gdyby nie to że tej ostatniej nie dało się zamontować.
Hmm, uznałem że pewnie nie sformatowałem - co też uczyniłem… a tu nadal zonk.
Poniżej wszystko, natomiast co ciekawe - po downgrade do xfsprogs-3.2.2-2 nie ma problemów.
Kernel własnoręcznie kompilowany - 3.10.9-vs2.3.6.6, z nałożoną łatką linux-vserver.
Poniżej zrzut tego co się działo:
root w bravo ~>mkfs.xfs /dev/md5
mkfs.xfs: /dev/md5 appears to contain an existing filesystem (xfs).
mkfs.xfs: Use the -f option to force overwrite.
root w bravo ~>mkfs.xfs -f /dev/md5
meta-data=/dev/md5 isize=512 agcount=4, agsize=122106492 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1
data = bsize=4096 blocks=488425968, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=238489, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
root w bravo ~>mount /dev/md5 /archiwum/
mount: wrong fs type, bad option, bad superblock on /dev/md5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
root w bravo ~>dmesg|tail --lines=
[ 269.580169] XFS (md5): Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled!
Use of these features in this kernel is at your own risk!
[ 269.580172] XFS (md5): Superblock has unknown read-only compatible features (0x1) enabled.
[ 269.580173] XFS (md5): Attempted to mount read-only compatible filesystem read-write.
Filesystem can only be safely mounted read only.
[ 269.580175] ffff880fa7b3e000: 58 46 53 42 00 00 10 00 00 00 00 00 1d 1c c9 f0 XFSB............
[ 269.580176] ffff880fa7b3e010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 269.580177] ffff880fa7b3e020: 3e 43 ed 05 48 1f 41 6b be f6 cc 82 32 d3 ad 0d >C..H.Ak....2...
[ 269.580178] ffff880fa7b3e030: 00 00 00 00 10 00 00 08 00 00 00 00 00 00 00 60 ...............`
[ 269.580180] XFS (md5): Internal error xfs_sb_read_verify at line 730 of file fs/xfs/xfs_mount.c. Caller 0xffffffffa0829ed5
[ 269.580182] CPU: 0 PID: 1040 Comm: kworker/0:1H Not tainted 3.10.9-vs2.3.6.6 #3
[ 269.580183] Hardware name: /DX79TO, BIOS SIX7910J.86A.0650.2014.0307.0138 03/07/2014
[ 269.580189] Workqueue: xfslogd xfs_buf_iodone_work [xfs]
[ 269.580191] 0000000000000001 ffff880fa8329d28 ffffffff81688466 ffff880fa8329d48
[ 269.580192] ffffffffa082c4ba ffffffffa0829ed5 0000000100000001 ffff880fa8329d88
[ 269.580194] ffffffffa082c519 0000000000000000 00000000000002da ffff880fa7d78600
[ 269.580196] Call Trace:
[ 269.580199] [<ffffffff81688466>] dump_stack+0x19/0x1b
[ 269.580204] [<ffffffffa082c4ba>] xfs_error_report+0x3a/0x40 [xfs]
[ 269.580209] [<ffffffffa0829ed5>] ? xfs_buf_iodone_work+0x85/0xb0 [xfs]
[ 269.580214] [<ffffffffa082c519>] xfs_corruption_error+0x59/0x80 [xfs]
[ 269.580220] [<ffffffffa087e67a>] xfs_sb_read_verify+0x11a/0x130 [xfs]
[ 269.580225] [<ffffffffa0829ed5>] ? xfs_buf_iodone_work+0x85/0xb0 [xfs]
[ 269.580229] [<ffffffffa0829ed5>] xfs_buf_iodone_work+0x85/0xb0 [xfs]
[ 269.580231] [<ffffffff8105708f>] process_one_work+0x16f/0x3e0
[ 269.580232] [<ffffffff81057729>] worker_thread+0x119/0x370
[ 269.580234] [<ffffffff81057610>] ? rescuer_thread+0x2d0/0x2d0
[ 269.580236] [<ffffffff8105d6ab>] kthread+0xbb/0xc0
[ 269.580238] [<ffffffff8105d5f0>] ? kthread_freezable_should_stop+0x60/0x60
[ 269.580241] [<ffffffff8168e26c>] ret_from_fork+0x7c/0xb0
[ 269.580243] [<ffffffff8105d5f0>] ? kthread_freezable_should_stop+0x60/0x60
[ 269.580244] XFS (md5): Corruption detected. Unmount and run xfs_repair
[ 269.580265] XFS (md5): SB validate failed with error 22.
Pozdrawiam,
--
Jacek Osiecki
josiecki w silvercube.pl
Silvercube s.c.
ul. Makuszynskiego 4
31-752 Kraków
+48 (12) 684 21 00
Więcej informacji o liście pld-users-pl