smart

[lord_Niedzwiedz]

>    A jaka wartosc dla tego atrybutu pokazuje smartctl -a?
>
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail 
Always       -       0
  2 Throughput_Performance  0x0005   140   140   054    Pre-fail 
Offline      -       68
  3 Spin_Up_Time            0x0007   100   100   024    Pre-fail 
Always       -       0
  4 Start_Stop_Count        0x0012   100   100   000    Old_age  
Always       -       3

  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail 
Always       -       0


  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail 
Always       -       0
  8 Seek_Time_Performance   0x0005   124   124   020    Pre-fail 
Offline      -       33
  9 Power_On_Hours          0x0012   100   100   000    Old_age  
Always       -       618
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail 
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age  
Always       -       3
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age  
Always       -       5
193 Load_Cycle_Count        0x0012   100   100   000    Old_age  
Always       -       5
194 Temperature_Celsius     0x0002   206   206   000    Old_age  
Always       -       29 (Min/Max 23/33)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age  
Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age  
Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age  
Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age  
Always       -       0

A codziennie ze smarta dostaje info:

Device: /dev/sdd [SAT], Failed SMART usage Attribute: 5
Reallocated_Sector_Ct.

Dysk nówka sztuka wymieniony  ;-]